CB2 ACACIA User manual

Made in Vietnam - r04 Page 1 of 4
acacia NIGHTSTAND
hardware
components
tools required
Thank you for purchasing the Acacia Nightstand.
This page lists all the contents included in the box.
Please take the time to identify the hardware as well as
the individual components to this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note:2 people are required to safely assemble this product.
Missing hardware?
Please call 800.606.6387 for replacements.
phillips head screwdriver
12 - wood
dowels
12 - cam
screws
12 - cams
1 - back panel
1- top panel
1 - fixed shelf
1 - bottom panel
2 - side panels
(1 left, 1 right)
8 - screws
1 - drawer back
2 - drawer sides
(1 left, 1 right)
1 - drawer
bottom panel
1 - drawer front
NOTE: We recommend the use of hand tools instead of power tools.
Customer Service 800.606.6252 I Latest instructions available at www.cb2.com

acacia NIGHTSTAND
Made in Vietnam - r04 Page 2 of 4
1 2
3
A. Insert 4 cam screws into bottom panel as
shown.
B. Insert 4 cam screws into top panel.
C. Insert 4 cams and 4 wood dowels into fixed
shelf.
Insert 4 wood dowels, 2 cam screws, and 4 cams
into left and right side panels as shown. Make
sure arrows on each cam points toward nearest
edge with holes as shown.
4
Fit dowels of fixed shelf into corresponding holes of
side panels as shown. Make sure cams of fixed
shelf are positioned toward the glides as shown.
With a screwdriver, turn each cam clockwise until it
securely engages each cam screw.
fixed shelf
left side panel
right side panel
Customer Service 800.606.6252 I Latest instructions available at www.cb2.com
left and right
side panels
A
B
C
bottom panel
top panel
fixed shelf
Fit dowels of assembled unit into corresponding
holes of bottom panel. Secure all cams.
bottom panel
NOTE: Make sure
arrows on each cam
points toward nearest
edge with holes.
NOTE: Make sure the groove
on the side panels face
each other as shown.
NOTE: Make sure the groove
on the bottom panel is on the
same side as the grooves on
the side panels.

acacia NIGHTSTAND
Made in Vietnam - r04 Page 3 of 4
5 6
7
With the assistance of another adult, position unit
upright as shown. Slide back panel down into
grooves of side and bottom panels as shown.
Fit dowels of assembled unit into corresponding
holes in top panel as shown. Make sure the
groove in the top panel fits over the back panel.
Secure all cams.
8
Place drawer front face down on clean, padded
surface as shown. Attach drawer left side with 2
screws as shown. Make sure the open end of the
glide on the drawer side panel is positioned
towards the back of the drawer. Secure screws
with a screwdriver.
back panel top panel
drawer
left
drawer front
Customer Service 800.606.6252 I Latest instructions available at www.cb2.com
Slide drawer bottom into grooves of drawer
assembly as shown.
drawer bottom

cleaning & care
Clean surfaces with a dry or damp soft cloth. Do
not use abrasive cleaners. Do not use furniture wax
or polish as the unit is finished with a protective
clear lacquer. It is recommended to use coasters to
protect surface from heat and water.
acacia NIGHTSTAND
Made in Vietnam - Page 4 of 4
9 10
11
Attach drawer back with 2 screws.
Attach drawer right side to the drawer assembly
with 4 screws as shown. Make sure the open end
of the glide on the drawer side panel is positioned
towards the back of the drawer.
Fully extend drawer glides from assembled unit.
Fit drawer glides of drawer assembly into
corresponding drawer glides of the assembled
unit. Push drawer assembly back until assembly
is secure.
Assembly is now complete.
drawer back
right
drawer panel
Customer Service 800.606.6252 I Latest instructions available at www.cb2.com
drawer unit
assembled unit