Cermate Technologies TN531D Technical manual

Technical Document
Version 0.0
January, 2010
www.cermate.com
PLC Connection Guide
TN531D
BACNet/IP Driver Setting
◎Revision Record
Revision
Date
Content
Owner

TND531-E0
Page 2 of 9
www.cermate.com
Preface
This tech note introduces how to connect BACNet/IP device with the PanelMaster HMI.
When you wish to link with the BACNet/IP device, please follow below steps to
use the CAS BACNet Explorer to search on-line device:
(1) CAS BACNet Explorer setting

TND531-E0
Page 3 of 9
www.cermate.com
(2) Apply the CAS BACNet Explorer tool
Step 1: Press the “License”
Step 2: Fill out one e-mail addres to apply the “Product Key”and it can be used for
60-minutes.
If you need to use several times, you can use same e-mail account to apply it.
Step 3: Press the ”Request a key”, it will enter its website and key-in the e-mail account to
execute the “Apply”button and then get their product key from your e-mail.
Step 4: Please copy the “Product Key”into this space.
Step 5: Press the “Activate”to enable this tool.
Step 1
Step 3
3
2
Step 1
Step 5
5
5
4
5
4
3
Step 1
Step 2
Step 4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
Step 1

TND531-E0
Page 4 of 9
www.cermate.com
(3) BACNet/IP netwrok setting
Step 1: Select the “Network”
Step 2: Select the “BACnet IP”and “BACnet Ethernet”
Step 3: Key-in the “BACNet IP Port”
Step 4: To make sure the the PC and BACNet/IP device is linking, to press the “Refresh”
button toget the on-line device.
Step 5: To select the BACNet IP device to press the “OK”button.
Step 2
Step 4
Step 1
Step 5
Step 3

TND531-E0
Page 5 of 9
www.cermate.com
(4) Press the ”Discover” button and select all device to press ”Send”.
指令功能碼:讀取命令碼 0x01/0x02/0x03/0x04
寫入命令碼 0x05/0x06/0x15/0x16

TND531-E0
Page 6 of 9
www.cermate.com
Sample: the object ID is ”9999” and this ID is the node address of the PM software
setting.
Note: The node address of the PM Designer software (Before Ver1.2.57) is
0~32767. Please setting the object ID to 0~32767.
Device AV1=456.000 (Floating Point)

TND531-E0
Page 7 of 9
www.cermate.com
HMI Settings:
Select [Device/Server: Honeywell BACnet/IP Protocol]
Setting HMI IP address to 192.168.1.34, and the Node Address=9999 (Object I.D.)

TND531-E0
Page 8 of 9
www.cermate.com
Bit Device:
Word Device:
~Thank You~

TND531-E0
Page 9 of 9
www.cermate.com
Technical Support Information
中國大陸 QQ 專線 : 800014850
www.panelmaster.com.cn / www.cermate.com
資料下載專區 ftp:://mail.cermate.com + User name + Password (欲加入會員需要申
請)
合作貼牌聯絡專線: China: 0910011916 / 86-13823788405 [email protected]
Taiwan: 886-910011915 [email protected]
Worldwide: 886-910011914 [email protected]
Cermate Technologies (Shanghai) Inc. 屏通科技(上海)有限公司
Phone: [phone]~2
FAX : [phone]
E-mail: [email protected]om
Shenzhen Cermate Technologies Inc. 屏通科技(深圳)有限公司
Phone: [phone],
FAX : [phone]
E-mail: [e-mail]
Cermate Technologies Inc. (台湾) 屏通科技股份有限公司
7F-1, No. 168, Lien-Cheng Road, Chung-Ho City, Taipei, Taiwan 235 R.O.C.
Phone: [phone]
FAX : [phone]
E-mail: [e-mail]