Channel Vision OS526 User manual

Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
product with new or rebuilt parts, free of charge in the USA, for ten
years from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
[phone] toll free. A Return Authorization number must be
obtained in advance and can be marked on the outside of the shipping
carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
500-240 rev A1
10
www.chann e l v i s i o n . c o m
234 Fischer Avenue, Costa Mesa, California 92626 USA
[phone] [phone] [phone] fax
email: [email protected]
OS526
5.25” Marine/Outdoor Speaker
9

2
1) Weather resistant design
2) Aluminum grills, and brackets
3) hardware
4) abinet resists sun fade
) 14 AWG gold plated terminal posts
) 5.25”
)
) 18dB /octave crossover network
) Tweeter protected by poly switch
Stainless steel
UV protected c
5
6
7
8
9
Long Extrusion Woofer
0.5” High Compliance Polymer Tweeter
Model OS526
To set your OS526 on a shelf,
attach the rubber feet here
3
Specifications:
Frequency range:
Sensitivity:
Power Handling:
Drivers:
Impedance:
Finish:
Dimensions:
Weight:
60Hz - 20kHz ± 3dB
90dB (1W/1M)
160 Watts (max)
1- 0.5” High Compliance
Polymer Tweeter
1- 5.25” Long Extrusion
Woofer with 20oz magnet
6 ohms
ABS plastic
10.63”H x 7.32” W x 6.30” D
5.2 Lbs with bracket
Specifications subject to change without notice.
Installation:
h
h
h
h
h
The OS526 may be mounted vertically or horizontally.
The OS526’s case is weather resistant and made with UV
stabilized ABS. But for longest life, we recommend
placement in a protected area, such as under an eave.
We recommend wiring with AWG 16 or larger, stranded
wire.
For proper phasing, both speakers must be wired alike.
Connect red wire to red terminal on speakers and to red
or plus terminal on amplifier.
To control the volume of the speakers locally, use an
impedance matching volume control, such as the
Channel Vision VC-302.