Chauvet MVP series User manual

Getting Started User Manual
12
Series
18
37.5

Edition Notes
MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10
Edition Notes
This User Manual covers the description, safety precautions, setup, installation,
operation, and maintenance for all 3 Modular Video Panels offered by CHAUVET®.
This edition was published in January 2012.
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET®
or Chauvet). The CHAUVET® logo in its entirety including the Chauvet name and
the dotted triangle, and all other trademarks on this manual pertaining to services,
products, or marketing statements (example: It’s Green Thinking™
) are owned or
licensed by CHAUVET®. Any other product names, logos, brands, company names,
and other trademarks featured or referred to within this document are the property of
their respective trademark holders.
Copyright Notice
CHAUVET® owns the content of this user manual in its entirety, including but not
limited to pictures, logos, trademarks, and resources.
© Copyright 2012 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Manual Usage
CHAUVET® authorizes its customers to download and print this manual for
professional information purposes only. CHAUVET® expressly prohibits the usage,
copy, storage, distribution, modification, or printing of this manual or its content for
any other purpose without its written consent.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 inches),
double sided. If using A4 paper (210 x 297 mm), configure your printer to scale the
content accordingly.
Disclaimer
CHAUVET® believes that the information contained in this manual is accurate in all
respects. However, CHAUVET®
assumes no responsibility for any error or
omissions in this document. CHAUVET® reserves the right to revise this document
and to make changes from time to time in the content hereof without obligation of
CHAUVET® to notify any person or company of such revision or changes. This
does not constitute in any way a commitment by CHAUVET®
to make such
changes. CHAUVET® may issue a revision of this manual or a new edition of it to
incorporate such changes.
Document Revision
The MVP™ Series Getting Started User Manual, Rev. 10, supersedes all previous
versions of this manual. Please discard any older versions of this manual you may
have, whether in printed or electronic format, and replace them with this version.
Author
Date
Editor
Date
D. Couppe 2/14/12 S. Graham 2/14/12

Table of Contents
MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10 -i-
Table of Contents
1. Before You Begin...............................................................................................1
What Is Included............................................................................................................ 1
Unpacking Instructions................................................................................................... 1
Claims ...................................................................................................................................1
Typographic Conventions............................................................................................... 1
Icon Meaning................................................................................................................. 1
Safety Notes.................................................................................................................. 2
Expected LED Lifespan.................................................................................................. 2
2. Introduction........................................................................................................3
Product Description........................................................................................................ 3
Features ........................................................................................................................ 3
Additional Features.................................................................................................................3
Additional Products.................................................................................................................3
Optional Accessories..............................................................................................................3
Available Signal and Power Cables (optional)..........................................................................3
Product Overview: MVP™ 12, MVP™ 18, and MVP™ 37.5............................................ 4
Product Dimensions....................................................................................................... 6
MVP™ Pixels Per Panel................................................................................................. 6
3. Setup...................................................................................................................7
AC Power ...................................................................................................................... 7
AC Plug .................................................................................................................................7
Power Linking ........................................................................................................................7
4. Mounting.............................................................................................................8
Orientation..................................................................................................................... 8
Truss Installation............................................................................................................ 8
5. Joining Each MVP™ (Creating a Modular Design)..........................................9
Vertically Joining the Panels........................................................................................... 9
Horizontally Joining Panels ...........................................................................................11
6. Connecting (Cabling) Each MVP™ .................................................................12
Testing Signal and Power Connections.........................................................................12
Using the MVP™ Test Button........................................................................................12
Connecting the Signal Input ..........................................................................................13
Connecting Power and Signal Cables............................................................................14
Connecting the Signal Between Joined Panels....................................................................14
Connecting the Power Between Joined Panels....................................................................16
7. Typical MVP™ Installation...............................................................................17
Step 1...........................................................................................................................17
Step 2...........................................................................................................................17
Step 3...........................................................................................................................17
Step 4...........................................................................................................................17
Step 5...........................................................................................................................17
Step 6...........................................................................................................................17
Step 7...........................................................................................................................17
MVP™ Sample Video Wall System Setup.....................................................................18

Table of Contents
-ii- MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10
8. Operation..........................................................................................................19
Additional Hardware and Software ................................................................................19
About LED Studio .........................................................................................................20
Description...........................................................................................................................20
9. Technical Information......................................................................................21
MVP™ Maintenance.....................................................................................................21
Troubleshooting User Manual .......................................................................................21
Returns Procedure........................................................................................................22
Contact Us....................................................................................................................22
10. Technical Specifications ...............................................................................23

Before You Begin
MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10 -1-
1. Before You Begin
What Is
Included
•Two (2) or Six (6) MVPs (Modular Video Panels) models 12, 18, or 37.5
•One Neutrik® etherCON® Signal Cable per MVP™ 0.4 m/15.8 in
•One Neutrik® powerCON® Power Cable per MVP™ 0.4 m/15.8 in
•One 2- or 6-Pack Flight Case (based on the number of MVPs included)
•One Warranty Card
•
One Getting Started User Manual
Unpacking
Instructions
Immediately upon receiving this product, carefully unpack and check the
container. Make
sure you have received all the parts indicated above in good condition.
Claims
Upon receipt, if the container or the material inside the container (the product and included
accessories) appear damaged from shipping, or show signs of mishandling,
notify the
carrier immediately, not CHAUVET®.
Failure to do so in a timely manner may invalidate
your claim with the carrier. In addition, keep the container and all the packing material for
inspection.
For other issues such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with CHAUVET®
within seven (7) days of receiving the
merchandise.
Typographic
Conventions
Convention Meaning
1~512
A range of values in the text
50/60
A set of mutually exclusive values in the text
Italics
A reference to a section, chapter, or external document
<SET>
A button on the product’s control panel
Settings
A product function or a menu option
MENU àSettings
A sequence of menu options
1~10
A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to be entered or selected in a menu
Icon Meaning
Icon
Meaning
Critical installation, configuration, or operation information. Failure
to comply with this information may render the product partially or
completely inoperative, damage third-party equipment, or cause
harm to the user.
Important installation or configuration information. Failure to
comply with this information may prevent the product from
functioning correctly.
Useful, non-critical information.

Before You Begin
-2- MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10
Safety Notes
Please read the following Safety Notes carefully before starting to work with the product.
These notes provide important safety information about the installation, usage, and
maintenance.
This product contains no user-serviceable parts. Any reference to servicing in this
User Manual will only apply to properly trained CHAUVET® certified technicians. Do
not open the housing or attempt any repairs.
Please refer to all applicable local codes and regulations for the proper installation
of the product.
•Always connect the product to a grounded circuit to avoid the risk of electrocution.
•The product is rated IP54 and should only be used in environments meeting that
criteria.
•When hanging the product, always secure to a fastening device using a safety cable.
•The maximum ambient temperature is 122° F (50° C). Do not operate the product at
higher temperatures.
•Do not operate the product if you see damage on the housing, LED strips, or cables.
In any of these cases, have the damaged parts replaced by an authorized technician.
•Do not open or modify the product.
•Make sure the product is connected to the proper voltage provided in this manual’s
specifications and/or the specification sticker on the product.
•Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact CHAUVET® Technical Support.
Any damages caused by manual modifications are not subject to warranty.
CHAUVET® will not accept liability for any resulting damages caused by
unauthorized modifications or not observing the safety warnings and instructions
in the manual.
In the unlikely event that your CHAUVET® product may require service, contact
CHAUVET® Technical Support.
Expected LED
Lifespan
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in
clusters, LEDs exhibit higher operating temperatures than in ideal, single LED conditions.
For this reason, using clustered LEDs at their fullest intensity significantly reduces the
LEDs’ lifespan. The electrical, thermal management design of the MVP™ panel is
designed to provide the longest LED lifespan possible. Under normal operating conditions,
this lifespan can be 50,000 hours or longer. If extending this lifespan is vital, lower the
operational temperature by improving ventilation around the fixture
and reducing the
ambient temperature to an optimal operating range
. In addition, limiting the overall
projection intensity may also help to extend the LEDs’ lifespan.

Setup
MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10 -3-
2. Introduction
Product
Description
The MVP™ is a Modular Video Panel. The MVP™ series includes three models:
•MVP™ 12
•MVP™ 18
•MVP™ 37.5
Each model is a panel consisting of multiple LED full-color light strips. The number in each
model name indicates the pixel pitch (distance, in millimeters, between the LED light
strips) of that model. When multiple panels are assembled and connected (signal and
power), the entire configuration becomes a modular video wall design.
The outer dimensions of each panel are identical. The difference between each model is
the spacing between the LED light strips and the number of LED pixels on each strip. Both
of these values determine the total number of LED pixels provided on each panel. Each
pixel is one SMD5050 LED.
The aluminum alloy and stainless steel construction make the MVP™ reliable and solid,
as well as easy to install and dismantle. You can assemble multiple panels horizontally or
vertically, and each model is interchangeable with the others. This flexibility provides
numerous modular design possibilities.
The MVP™ video wall system is controlled using a PC and the LED Studio software
available as download from the Internet. Refer to the LED Studio User Manual for
detailed information and instructions on using LED Studio.
Features
•Packaged in a convenient CHAUVET® flight case that includes either two (2) or
six (6) MVP™ panels
•Lightweight, modular system
•Provides multiple graphics based on which MVP™ is used and how the video wall
is assembled
•Uses Neutrik® powerCON® and Neutrik® etherCON® connectors for easy
installation and connectivity
•Perfect for long-term installations
•Each MVP™ is interchangeable for creative modular video wall designs
•Tri-color SMD LEDs provide better image quality and wider viewing angle
•Designed for indoor or temporary outdoor installations
•
Easily viewed during daylight operation
Additional
Features
•One Neutrik® etherCON® signal cable per MVP™ 0.4 m/15.8 in
•One Neutrik® powerCON® power cable per MVP™ 0.4 m/15.8 in
Additional
Products
•MVP™ Driver (required)
•MVP™ 526P Signal Processor (processor required for alternate video sources)
Optional
Accessories
•MVP™ Signal Distributor (required when using 25 MVPs or more in your video wall)
•MVP™ Rigging Kit (required when you hang panels from a truss or truss structure)
Available Signal
and Power Cables
(optional)
•Signal cables (Neutrik® etherCON® Signal Extensions)
•
MVPU-SIG5FT
•
MVPU-SIG10FT
•
MVPU-SIG25FT
•Power cables (Neutrik® powerCON® Extension)
•
PCEXT5FT
•
PCEXT10FT
•
PCEXT25FT
•
PCLEAD50FT

Mounting the MVPs™
-4- MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10
Product Overview: MVP™ 12, MVP™ 18, and MVP™ 37.5
Signal Input
Power Input
Signal Output
Power Output
Vertical rigging
Rigging
Plate
Rigging
Plate
Rigging
Plate
Rigging
Plate
LED
Strip
Horizontal
locking knob
Fast Lock
Fast Lock
Handle
Vertical rigging
Underside of MVP™ Panel Ledge

Setup
MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10 -5-
The difference between each MVP™ model is the pixel pitch (space) between the LED strips and the
number of pixels (LEDs) on each strip. The basic housing and components are identical. Refer to the
previous MVP™ 37.5 illustration.
MVP™ 18
MVP™ 12
MVP™ 37.5

Mounting the MVPs™
-6- MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10
Product Dimensions
Each MVP™ model in the series has the same outside housing dimensions.
MVP™ Pixels
Per Panel
Although each MVP™ has the same outer dimensions, the LED pixels per
panel vary.
Each pixel is one SMD5050 LED. The following table provides the pixels per panel
in each
MVP™. The Series number (i.e., 37.5) indicates the pixel pitch in millimeters between each
light strip in that MVP™ model. For detailed specifications, refer to the Technical
Specifications table at the end of this User Manual.
MVP™ 12
MVP™ 18
MVP™ 37.5
Pixels per Panel 48 x 48 32 X 32 16 X 16
Total Pixels 2,304 1,024 256
You will use the number of pixels per panel and the screen resolution you would like to
use for your video wall display to calculate the number of panels,
horizontally and
vertically, supported by a single MVP™ Driver. This Driver is required to operate a
CHAUVET® MVP™ video wall system.
Diagrams of how the MVP™ panels and the
MVP™ Driver operate together follow later in this manual. For detailed information about
the MVP™ Driver and panel calculation examples, refer to the MVP™ Driver Quick
Reference Guide.
23.6 in
(600 mm)
23.6 in
(600 mm)

Setup
MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10 -7-
3. Setup
AC Power
Each MVP™ has an auto-ranging power supply that works
with an input voltage range of
100~240 VAC, 50/60 Hz.
Make sure that you are connecting the MVPs to the proper voltage, as specified
in this
User Manual and on the product’s specification sticker.
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
To determine the power requirements for each MVP™ in the s
eries, refer to the label
affixed to the product. You can also refer to the Technical Specifications chart in this
manual.
The listed current rating indicates the maximum current draw during normal operation. For
more information, you may download Sizing Circuit Breakers from the CHAUVET
®
website: www.chauvetpro.com.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0% to 100% switch.
AC Plug
Each MVP™ comes with a power linking cord to connect power between panels; however
,
the power input cord is not included.
The power input cord must
be purchased separately. CHAUVET® recommends the
Neutrik® powerCON® extension cable, item number PCEXT50FT,
available from
CHAUVET®.
This cable has a powerCON connector to connect to the MVP™ and a bare plug for
power
input. Use the table below as a reference to wire a new plug.
Connection Wire (US) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
Power Linking
All three panels in the Series support power linking.
Refer to the following table for
specifications on each panel.
MVP™ 12 MVP™ 18 MVP™ 37.5
@120 V, 60 Hz 7 7 13
@208 V, 60 Hz 11 11 20
@230 V, 50 Hz 12 12 22
Please refer to all applicable local codes and regulations for the proper installation
of this product.

Mounting
-8- MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10
4. Mounting
Orientation
Each MVP™ is a solid frame constructed of aluminum alloy and stainless steel. This
ensures each panel is stable and easy to install. Each panel also has a convenient built-in
handle located on the top, underside, of the panel. This handle enables you to easily pick
up and securely hold each panel while mounting and working with the panels.
The MVP™ can be assembled to provide any number of modular designs. The panels on
the top can be securely hung from a truss or other stable surface
. Always hang in a safe
position with adequate space for ventilation, configuration, and maintenance.
CHAUVET® recommends following the general guidelines below.
•When selecting an installation location, consider ease of access for operation and
routine maintenance.
•Make sure to hang away from any flammable material, as indicated in the Safety Notes
section.
•Never mount in places where rain, extreme temperature changes, or restricted
ventilation may affect it.
•Make sure that the structure to which you are hanging the panels can support the
weight.
Please see the Technical Specifications section of this manual fo
r the weight requirement
of each MVP™.
Truss
Installation
Refer to the following diagram for truss installation. CHAUVET® offers the MVP™ Rigging
Kit (sold separately) specifically designed for hanging the panels.
Attach the clamp
to the rigging
assembly.
Bolt rigging
assembly and
panels.
Clamp
MVP™ Rigging Kit sold separately.

Joining Each MVP™ (Creating a Modular Design)
MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10 -9-
5. Joining Each MVP™ (Creating a Modular Design)
Each MVP™ is joined together to create a modular designed video wall. Because the
panels are interchangeable, you can create a video wall by joining several of
the same
model or joining different models to create a larger or more complex video wall.
Vertically
Joining the
Panels
Each MVP™ can be easily joined vertically using the two (2) fast locks located at the top
corner of each panel and the vertical rigging located
on the bottom of the panel at each
corner. These connectors can be recessed if not being used.
Fast Locks
Vertical rigging

Joining Each MVP™ (Creating a Modular Design)
-10- MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10
Use the following instructions to join your panels vertically. Each step corresponds to the
number in the diagram.
1. When connecting two (2) panels, pull out the vertical rigging latch making sure it is
pushed outward.
2. The fast locks on the lower panel should be pointing up.
3. Align the top and bottom panels exactly on top of each other. Push the vertical rigging
inward to fasten.
Once the panels are fastened, make sure you turn the vertical rigging latch toward
the center of the panel to lock the panels in place.

Joining Each MVP™ (Creating a Modular Design)
MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10 -11-
Horizontally
Joining Panels Each MVP™ can be easily joined horizontally using the two horizontal locking knobs on
the inside left-hand top and bottom of each panel.
Instructions:
1. Align each knob with the corresponding hole on the right-hand outside of the panel to
which you are joining.
2. Once aligned, push in and twist clockwise a quarter-turn to lock the two panels
horizontally together.
3. You will feel the two panels lock together.
Horizontal locking knob

Connecting (Cabling) Each MVP™
-12- MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10
6. Connecting (Cabling) Each MVP™
Testing Signal
and Power
Connections
Each MVP™ has two (2) power supply sockets and two (2) signal sockets.
•The Power and Signal IN are located on the upper right-hand corner of each panel.
•The Power and Signal OUT are located on the upper left-hand corner of each panel.
•The Signal IN and OUT may be used interchangeably.
Each MVP™ has LED indicator lights.
•Each panel indicates a successful power connection when the Power indicator light
remains red.
•Each panel indicates video signal reception when the Signal LED indicator light
displays green. This light should be blinking rapidly to indicate good reception.
Using the MVP™
Test Button
Each MVP™ also has a Test button, used to ensure all LED strips in each panel
are
functional. Use the Test Button on each panel to perform a self-test. If self-
testing, you
must perform the test individually for each MVP™.
You do not need to connect to a signal
or use software.
When using the Test button, make sure the MVP™ is not connected to the MVP™ Driver.
To use the Test Button, you must connect the power, but do not connect the signal
cables.
1. Press the Test button to view various LED strip configurations on each MVP™.
2. Press the Test button one time and all the LED strips should display.
3. Press the Test button again to toggle through various LED light display configurations.
Signal Input
Power Input
Power Output
Power LED
Test Light
Link (Signal)
LED Test Light
Test Button
Signal Output

Connecting (Cabling) Each MVP™
MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10 -13-
Connecting the
Signal Input
The MVP™ video wall system you design can use two basic setup configurations to
connect the signal to the video wall: (1) a configuration using 24 or less panels, and (2) a
configuration using more than 24 panels. Refer to the following diagrams. See the
following section for connecting power to the MVP™ system, and connecting power and
signal between joined panels.
The following configuration of 24 panels shows a direct connection from the
signal to the MVP™ Driver into the first panel’s Signal Input socket. Refer to the
MVP™ Driver Quick Reference User Manual for information and instructions
on the MVP™ Driver.
The MVP™ system maximum signal load is 24 or less panels on a single signal
cable connection. When using more than 24 panels in a video wall design, you will need
a MVP™ Signal Distributor and additional signal cables to accommodate the number of
panels over 24. An MVP™ Signal Distributor output supports up to 8 signal output lines,
providing up to 192 total panels that can be connected from the MVP™ Signal Distributor.
You also can add more MVP™ Signal Distributors to a MVP™ video wall system. Refer to
the MVP™ Signal Distributor Quick Reference Guide for more information.
Single MVP™ (panel)
1
Signal Input socket
MVP™ Driver
DVI-D
Backup
Connection

Connecting (Cabling) Each MVP™
-14- MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10
Connecting
Power and
Signal Cables
The following sections provide information and diagrams on connecting signal and power
between panels.
One Neutrik® etherCON® signal cable and one Neutrik® powerCON® power cable are
included with each MVP™ package—one cable of each kind per MVP™ in the package.
These cables are to be used for panel linking only. You are able to purchase additional
cables.
Refer to the Introduction or Operation sections in this User Manual for available cables
and item numbers.
Connecting
the Signal
Between
Joined Panels
Signal cable panel connections can use several different configurations.
The basic
configuration to connect the signal from one panel to the next is as follows.
•The source signal is connected to the first panel’s Signal Input or Output.
•A signal cable is then connected to the first panel’s Signal Output and connected
to the next panel’s Signal Input.
•The connections continue until all panels are connected.
•The direction of the cables used to make the signal connections can vary.
The following diagrams are recommended suggestions for signal connections between 24
or less panels, and more than 24 panels.
Refer to Connecting Signal Input for information and instructions on connecting the signal
from the source.
This diagram shows an example of a simple signal connection using 24 or less
MVPs.
Signal Out to Next
Panel Above
Signal
Power
MVP™ Driver
DVI-D
Video Signal Cable in from
MVP™ Driver –Max. cable
length 100 m/328 ft
Signal Out to Next Panel
Signal In From the
Previous Panel
1

Connecting (Cabling) Each MVP™
MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10 -15-
The following diagram shows an example of a signal connection configuration using more
than 24 panels. A video wall design with more than 24 panels requires:
•Incoming signal connection to the MVP™ Driver.
•MVP™ Driver connection to the MVP™ Signal Distributor.
•Signal cable connections as determined by the number of panels in the video wall
design.
Every group of 24 panels will require another signal cable from the MVP™ Signal
Distributor. Eight (8) signal cables can be connected to a single MVP™ Signal Distributor.
MVP™ Driver
DVI-D
MVP™ Signal
Distributor
Up to 24 Panels
etherCON®
Up to 24 Panels
etherCON®
Source Signal In
Signal Out to Next Panel
Signal In From
the Previous Panel
Signal
Power

Connecting (Cabling) Each MVP™
-16- MVP™ (12/18/37.5) Series Getting Started User Manual, Rev. 10
Connecting
the Power
Between
Joined Panels
Power cable panel connections can also use different configurations. The basic
configuration to connect the main power supply from one panel to the next is as follows.
•The main power is connected to the first panel’s Power Input or Output.
•A powerCON® cable is then connected to the first panel’s Power Output and
connected to the next panel’s Power Input.
•The connections continue until all panels are connected.
•The direction of the cables used to make the power connections can vary.
The power input cord for the main must be purchased separately. CHAUVET®
recommends the Neutrik® powerCON® extension cable, item number PCLEAD50FT,
available from CHAUVET®.
Connect power between the panels using the same procedure as the signal only using the
Power Input and Power Output connectors. You must adhere to the power-linking
specifications for each MVP™ model.
Refer to the Power Linkingsection for details on the number of panels that can be linked
based on voltage from a single power connection.
Refer to the following diagram for an example of power connection from the main and to
each connected panel.
This example is using an MVP™ 12 or 18, power linking 7 panels horizontally @ 120 V.
MAIN POWER IN
MAIN POWER IN
MAIN POWER IN