Chenzhu CZLBX-48 Series User manual

CZ.CZLBX-48.11(S)E-4.6/15.05
Maintenance
User Manual
危险区
Surge Protective Device
Caution
Please check whether the product type on the package accords
to the ordering contract;
Read this manual carefully before installation or use. If there is
something unclear ,you can dial our technic support hotline;
Prevent friction, avoid electrostatic;
Users are not allowed to dismantle or repair the SPD otherwise
it will induce malfunction.
Connections
5
4
Add: Building 6, 201 Minyi Road, Caohejing Hi-Tech Park
Songjiang New Industrial Park, Shanghai 201612, P.R. China
Tel : [phone] Fax : [phone]
Email：[e-mail]
http://www.chenzhu-inst.com
(1).Before using, SPD must have a reliable grounding.
(2).Before using, please check again whether the module's EX-proof rating
accords with the operating ambient, and wiring and polarity are correct. If
working with flameproof transmitter, live action is not allowed.
(3).The products were test strictly before leaving factory. If users find any
abnormalities in the module, please contact the nearest agent or our
company.
(4).In 5 years from the delivery date, if the product works improperly during
normal operation, we will repair or replace it without payment.
CZLBX-48 series
4-wire
2-wire：
3-wire
Signal line
+
-
Red(Blue)
Black(Gray)
Yellow Green
Transmitter
grounded metal
Transmitter
grounded metal
+
Red
Blue
Black
Yellow Green
Signal line
+
-
Red
Blue
Black
Yellow Green
Gray
Signal line
Transmitter
grounded metal
+
S
-
S
Note:
.
The wires between surge protective device and protected
devices (including ground lines) should be as short as possible
Function principle diagram
CZLBX-48
Red(Blue)
Black(Gray)
Yellow Green
Blue
Red
Black
Yellow Green
Gray
Blue
Red
Black
Yellow Green
CZLBX-48-3
CZLBX-48-4
-
+
S

1 2 3
Model designations
2
Note:Wire size 32/0.2 (1.0mm , 18AWG), length 150mm.
National Quality Supervision and Inspection Center for Products of
Process Automation Instrumentation
Cerfication standards:
GB/T 20438.1(IEC 61508-1)
GB/T 20438.2(IEC 61508-2)
GB/T 18802.21(IEC 61643-21)
Functional safety level:SIL3
Safety cerfication
Summarize
(1).Conveniently installed on spare screwed holes of protected devices.
(2).Paralleled with signal cables of protected devices.
(3).Total discharge current is 20kA.
(4).Protecting 2-wire, 3-wire, 4-wire field instruments.
CZLBX-48 series surge protective device is designed for protecting devices
in the field from damaging by surges and field instruments which is usually
caused by lightning strikes. The product has passed the test of shanghai
lightning protection center. Explosion protect performance has passed the
certificati- on of National Supervision and Inspection Centre for Explosion
Protection and Safety of Instrumentation.
Specification
Dimensions
Explosion-proof parameters
EX-standards:
Ex ia IIC T4~T6 Ga
Ex d IIC T4~T6 Gb
Cerfication standards:
GB3836.1-2010(IEC 60079-0)
GB3836.2-2010(IEC 60079-1)
GB3836.4 -2010(IEC 60079-11)
Explosion-proof parameters:
China National Quality Supervision and Testcentre for Explosion
Protected Electrical Products(CQST).
Rated operating voltage Un (DC):
Max. operating voltage Uc (DC) :
Rated discharge current In(8/20us):
Max. discharge current Imax(8/20us):
Total discharge current Itotal(8/20us):
Protection level Up (8/20us, line to line):
Protection level Up (8/20us, line to ground):
Response time (line to line):
Response time (line to ground):
Bandwidth(-0.5dB):
Leakage current:
Temperature range:
Relative humidity:
Material:
Degree of protection:
Test standards:
Lightning protection performance test：
24V
48V
5KA
10KA
20KA
85V
600V
1ns
100ns
2MHz
＜2uA
-40℃～+85℃
5%～95%
304 stainless steel
IP65
GB 18802.21
IEC 61643-21
e
Shanghai lightning protection
centr
Customer can specify the thread standards:
□ M20×1.5(International)
□ 1/2" NPT(American)
□ Pg13.5(German)
□ G1/2"(British)
□ 3/4" NPT(American)
□ G3/4"(British)
I:M20×1.5
P:Pg13.5
N:1/2"NPT
g:G1/2"
n:3/4"NPT
G:G3/4"
28mm
14mm
75mm
14mm
75mm
24mm
75mm
20mm
24mm
CZLBX-48 - □ □
CZLBX s erie s SPD
Max. operating voltage
3:3-Wire
Blank:2-Wire
4:4-Wire
S:Cascade model
Blank:Parallel model
50V 32mA 0.4W
Type
CZLBX-48
CZLBX-48-3 50V 16mA 0.2W
Li
0uF 0mH
0mH
Ci
0uF
Pili
Ui
CZLBX-48-4 50V 0.4W32mA 0uF 0mH