Chiayo GMW-216 User manual

OPERATION MANUAL
Professional Desktop Gooseneck Microphone
GMW-216/GMW-200/GM-200
GREEN PRODUCT
ISO 9001:2008

1. Gooseneck microphone input
2. LCD display
3. UP button
4. DOWN button
5. SET button
6. TALK button: Press to talk, for short speaking.
7. LOCK button: Switch of long/temporary speaking.
8. POWER on/off LED
9. POWER on/off switch
10. Gain control:
.
Standard Configuration
1. Gooseneck microphone + base
2. Operation manual
3. Switching adaptor
User can rotate the knob until a desired acoustic quality
is reached
11. High impedance audio input/low impedance audio output connector
12. DC in/charging port
13. DC on/off switch:
To be powered by DC input, please remove the batteries, slide to ON, and
connect the switching adaptor. The DC on/off indicator will light up.
To recharge the NiMH batteries inside, please slide to ON and connect the
switching adaptor. The DC on/off indicator will light up.
When the switching adaptor is not connected, please slide to OFF.
14. DC on/off indicator
15. Battery compartment
Parts and functions of GMW-216/GMW-200
8
6
1
7
2
4
5
3
10 12
11
9
15
13
14
ON OFF
GMW-216/GMW-200

LCD menu settings
1. Changing CHANNEL / FREQUENCY:
Use UP or DOWN button to go to the CHANNEL / FREQUENCY page.
The cursor will flash to allow changes to be made. Pressing UP or DOWN
button will increase or decrease the channel number. The corresponding
frequency will change accordingly. When a desired channel(frequency) is
being selected, it will be automatically saved and stored in the memory.
2. Changing Battery selection:
Use UP or DOWN button to go to the Battery selection page.
Press SET for about 2 seconds to activate the cursor. Press UP or DOWN
button to move the cursor to either NiMH ( rechargeable battery ) or AKLN
( Alkaline battery ) position.
When the desired option has been selected, press SET for about 2 seconds to
save and store the data in the memory.
Application
GMW-216/200 is compatible with any of CHIAYO's UHF 16/100- channel
receivers and portable PA system whichever is equipped with built-in 16/100-
channel wireless receiver module. Besides handheld and beltpack types, it is
another stylish hands free alternative.
Remark : When changing transmitter frequencies, user should take
care not to cause interference to other channels / users.
Remark : Do not connect the adaptor when AKLN batteries are
being used. Wrong selection of battery will cause battery sensing
electronics to display wrong information and mislead charging
status.
Professional Wireless & Wired Gooseneck Microphone

1. Gooseneck microphone input
2. LOCK button: Switch of long/temporary speaking.
3. TALK button: Push to talk, for short speaking.
4
Standard Configuration
1. Gooseneck microphone + base
2. Operation manual
Application
Operation is the same as common wired microphones.
. High impedance audio input/low impedance audio output connector.
5. Battery compartment
FCC Caution: To assure continued compliance, any changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to operate
this equipment. (Example - use only shielded interface cables when connecting to computer
or peripheral devices).
THIS DEVICE COMPLIES WITH PART 74 OF THE FCC RULES. This equipment complies
with FCC RF radiation exposure limits set forth an uncontrolled environment.
Parts and functions of GM-200
12I2175
1
2
4
3
5
GM-200 Professional Wired Gooseneck Microphone