Chungho Iguassu ICE 500 User manual

ChungHo Nais Hot and Cold
Water Purifier with Ice
10-1, SCL B/D 5F, Dodang-Dong, Wonmi-Gu,
Bucheon, Kyunggi-Do, Korea
Tel : [phone](ext.260,262,269) / Fax : [phone]
Internet : www.chungho.co.kr / e-mail : [email protected]

✽Read instruction manual thoroughly before using product.
✽Product appearance, specification, etc. is subject to change without
prior notice if necessary for improving product performance.
✽Design and color may differ from cover model.
User's Manual
ChungHo Nais Hot and Cold Water
Purifier with Ice

2
GGrreeeettiinnggss
TTaabblleeooffCCoonntteennttss
We greatly appreciate your purchase of the ChungHo Nais Hot, Cold and Ice
Purification System, the IGUASSU ICE 500.
IGUASSU ICE 500 A superior water cooler producing clean, pure ice and water through
the combination of our water purifier with an integrated ice maker.
Enjoy ice and water produced by ChungHo Nais Hot, Cold and Ice Purification System,
the IGUASSU ICE 500.
IGUASSU ICE 500 Designed and manufactured according to standard specification, and
is produced with a 95% quality assurance on all integrated components. The system is
tested thoroughly on strictquality guidelines including temperature, moisture, shock,
dust, vibration, etc. We are sure that the IGUASSU ICE 500's subjection to these various
production processes will provide the utmost customer satisfaction in both quality
and excellence.
Before installing or using this product, by all means read this instruction man-
ual in detail and after doing so, please save it for future reference.
1. Product Features 3~4
2. Safety Precautions 5~7
3. System Component Identification 8
4. Installation Precautions 9~10
5. Installation Method 11
6. Usage 12~18
6-1. Display and System Function Settings 12
6-2. Operation and Water Dispensing Selection 12
6-3. Customer Warning Sensor 13
6-4. Function Settings and Releasing Methods 13~14
6-5. Ice and Water Dispensing Method 15
6-6. Draining the System for Relocation/Installation 15
6-7. Understanding the Ice Making Process and Operation 16
7. Cautions during Use 17
8. Filter Functions 18
9. Product Specifications 19
10. Flow Diagram and Power consumption 20
11. Wait a Moment! Please Check these Before Requesting A/S 21~22
12. Memo 23

3
11..PPrroodduuccttFFeeaattuurreess
1
2
3
4
5
6
7
8
9
10
Water Purification System Providing an Integrated Ice Making Function
The IGUASSU ICE 500 is designed for both convenience and practicality, as it utilizes a compact ice mak-
ing system, designed to obtain cold water for the production of ice. With an ice making mechanism fea-
turing an ice tray which utilizes the freezing point method as well as reverse osmotic water purification.
(Patent application: No.2005-99663, 2005-365293, 200510127096.9, 11/342,117)
24 Hour Natural Water Circulation System (N.W.P.W.)
This function of ChungHo purification systems is designed to allow water to continuously flow for 24
hours within the water purifier by adopting a natural circulation method. This mode, entitle N.W.P.W.
applies the natural weight of water pressure in order to always supply clean and fresh water.
(Patent: No.105585)
Pure Ice Production Utilizing the Freezing Point Method
The Freezing Point Method produces only the purest ice by supplying purified water to the ice making
unit. The freezing point principle states that the purest water freezes at 32OF while non-pure water will
freeze at a temperature below that.
Energy Saving Function
The economically designed IGUASSU ICE 500 delivers purified water to the ice making unit in order to
make pure ice while simultaneously sending cooled water to cold water tank. This allows the system to
maintain a constant cold water temperature, thus inherently preventing water waste and helping to con-
serve energy.
Automatic Ice Dispenser
Upon pressing the ice dispenser touch sensor button, the system then slowly rotates the ice storage plate
via an integrated motor in order to automatically replenish the ice supply within the storage housing.
Touch Sensor Application
Breaking away from traditional button applications, the IGUASSU ICE 500 has a built-in touch sensor
application. This addition has been integrated into the already stellar system with customer convenience
in mind. The easy-to-use sensor application allows for effortless and enjoyable drinking water with ice.
Infrared Water Level Detection Sensor
With improved detection accuracy, as compared to existing mechanical detection types, the Infrared OLC
Sensor applies an electronic water level sensor that was developed for stable water level detection. The
signal is connected to a controller in order to automatically adjust purified water levels.
(Patent: No.426182)
Lock Function (Ice Cube / Hot Water Locking Function + Hot Water Automatic Selection /
Release Function)
Setting the Ice Cube / Hot water locking function using Lock / Hot touch sensor button prevents Ice
Cube and Hot Water from being dispensed from the unit.
Continuous Water-intake Function
The function of Continuous water-intake can select volume of water intake of each 0.5 liter, 1.0 liter
according to number of times that can do ON/OFF and Touch using the continuous water-intake Touch
button. If press Push Button after volume of water intake selection, because continuous water-intake of
ambient water or cold water is possible, use is very convenient. * Hot water is not available to water-
intake continuously.
Product Inspection through the USB Pot
We can inspect active state of product connecting our company Engineer's exclusive use PDA to USB Pot
that is threaded to product. Because inspected information of product is collected and manage to Server
through PDA, we offer Service that become Up-grade still more.

4
11..PPrroodduuccttFFeeaattuurreess
11
12
13
14
15
16
17
18
19
20
21
System Display Functions and Safety Reinforcement
The safety features of the product have been enhanced in order to prevent various problems from occurring.
The system will inform the user(s) of abnormal occurrences through a flashing display icon and by automati-
cally stopping the ice making function, cold water function, and water purification function when an abnor-
mality in the system is detected.
Power Saving Function
Selecting the power saving function during hot water operation activates the light detection sensor which
functions in accordance with the levels of light around the water purifier. By activating the power save func-
tion, the user will ultimately reduce power consumption at night.
Automatic Water Dispensing
This system function is convenient to the user because it enables ambient water, cold water, and hot water
to be taken at the press of a button and placed into a container of any kind. Another new development,
found in the IGUASSU ICE 500, is the automatic selection of cold water. In many circumstances, cold water is
found to be the most desired temperature of water for drinking. The system has a reset function which,
shortly after selecting hot or ambient water, will automatically switch the cooler into cold water mode.
Separate Water Delivery from a Single Spout
Ambient water, cold water, and hot water come out from a single spout, but independent water hoses are
applied so that ambient water, cold water, and hot water are not mixed, improving overall satisfaction in
preferred temperature from the first drink.
Beep Function
This provides customers a convenient reminder that a system setting has been changed as sounded via beep-
ing (ding~, dingdong~, etc.) and as applied via system touch sensors.
Noise Prevention
This reduces system operating noise by applying a dual noise prevention material, utilizing a shock mitigation
structure found at ice storage house, etc.
Wire Condenser(Natural Convection)
Using natural convection, the system wire condensers are rated to reduce noise and thus provide further
convenience for the user.
Convenience in Use
Function operations are designed as simply as possible in order to maximize convenience.
Beautiful Design
The IGUASSU ICE 500 truly displays sophistication and beauty. This harmonizing design and newly refined
look can create a modern look for any location.
Adoption of New Coolant
The IGUASSU ICE 500 has adopted an environmentally friendly cooling system in the new R-134a, a coolant
that will not add to the problems of ozone layer destruction and global warming.
Assistance charge function
Among Mobile phone, PDA, MP3 player, Digital camera, electric dictionary, charge voltage can charge
because product that is 5V uses USB charge Cable.
●Use USB charge Cable that is quoted certainly. Can need special connection jack or exclusive use charge
Cable according to product.
●When charge in case charge target product is badness Touch Button can be fastening state, and if discon-
tinue charge in this case, Touch Button fastening state is defrosted. Also, charge target product can be
damaged when charge tension does not guess right.
●Do not pass maximum charge time 30 minutes

5
22..SSaaffeettyyPPrreeccaauuttiioonnss
●When the power cord has been damaged, exchange
the power cord in order to prevent danger such as
electric shock, etc.
(Do not use damaged or loose wall outlets. There is
danger of electric shock or fire.)
●Do not touch the power plug with wet hands.
(There is danger of electric shock.)
●Do not use multiple electrical
appliances in one power out-
let simultaneously.
(This can cause a fire due to
abnormal heating in wall
outlet.)
●Insert the power plug in a sta-
ble position in order to avoid
swinging.
(Unstable connection can be
cause of fire.)
●Do not bend the power cord
excessively nor allow it to be
damaged by being pressed
under heavy objects.
(There is danger of electric
shock or fire.)
●If the product is damaged or
malfunctioning, do not disas-
semble, repair, or remodel it
on your own.
●Do not put candles, lit ciga-
rettes, etc. on the product.
●Do not install the product
near a heating appliance.
(There is danger of fire.)
●Do not put a bowl containing
water, chemicals, small metals,
etc. on the product.
(If these materials enter the
inside of product, there is
danger of electric shock or
fire.)
Associated with the possibility for serious injury or death.
Warning
Cautions are divided into 2 categories: ''WWaarrnniinnggss''and ''PPrreeccaauuttiioonnss..''

6
22..SSaaffeettyyPPrreeccaauuttiioonnss
●Hot water is very hot, so to
avoid burns always use con-
tainers such as cups during
water dispensing.
●Before cleaning the inside of
product, always pull out the
power plug.
(There is danger of electric
shock or fire.)
●When wanting to dispense ice,
place container close to the ice
dispenser hole, touch the ICE
touch sensor button, and
attempt to keep ice from being
scattered on the floor.
(Take care in order not to
allow containers such as cups,
etc. to be inserted into the
inside of ice dispenser hole.)
●Do not put foreign materials
into the ice dispenser hole nor
block the dispenser hole.
(This can become a cause for
system malfunction.)
●After transporting the product,
do not supply the product
with power until a minimum
of 30 minutes has passed for
stabilization of the product.
●Do not attempt to operate the
product if installed at over a
15°incline.
(This can be the cause of
malfunction or unwanted
troubles.)
●Do not tilt the product over
45°during transportation.
(Severe inclination can be
the cause of reduced
performance.)
●Do not install the product in a
sloped or unstable position.
(This can be the cause of
reduced performance,
system damaging, or
overall troubles.)
●Do not install the product in a
place where the surrounding
temperature may drop below
32OF.(0OC)
Use in order to avoid injury, property damage, and reduced product performance.
Caution

7
22..SSaaffeettyyPPrreeccaauuttiioonnss
●Do not remove the power
cord by pulling it out of the
wall. Always remove it by
grasping the power plug.
(Damage to the power cord
can cause danger of electric
shock or fire.)
●This product is for AC
110V/60Hz, 220V/50Hz,
240V/50Hz, and 220V/60Hz
only. After installation, arrange
the power cord so that it will
not be stepped on or stepped
over.
●If dust, water, etc. finds its way
onto the power plug, wipe it
off well.
(There is danger of electric
shock or fire.)
●Do not put any covering, etc.
on the rear and side of prod-
uct. Blocking ventilation holes
may raise inside temperatures
allowing for system malfunc-
tion or even system stoppage.
●Fix hoses so that the brine water or the water discharged from the drainage hose may not splash into
surrounding areas.
●Do not install the product in
or around largely damp areas,
at a place near flammable
materials, or at a place
exposed to rain or snow.
(There is danger of electric
shock or fire.)
󱅁 Other common issues facing the user. 󱅁
1. During use of product, a murmuring water-flow sound, a rattling ice dropping sound, etc. may
occur some times during cold water production process or ice production process.
2. Opaque ice may occasionally be dispensed, but there is no abnormality in product perfor-
mance or ice quality.
3. TDSs(Total Dissolved Solids) found in ambient water, cold water, and ice may vary from one
another. (This is a phenomenon occurs because the ice is created by way of the freezing point
method.)
4. After the system power source is interrupted and then again restarted, irregular ice cube sizes
may temporarily occur.

8
33..SSyysstteemmCCoommppoonneennttIIddeennttiiffiiccaattiioonn
Drainage
Power cord
Ice dispenser touch sensor button
Full ice display
Full water display
water lock/Hot water operation touch sensor button
USB pot
Hot water dispenser touch sensor button
Cold water/
Ambient water dispenser touch sensor button
Water dispenser button
Ice dispenser
Water dispenser hole
Drain switch
Removed
water
(brine)
Source
water
Upper covering
Upper cover Ice making unit
Waterspout
Lower cover
Flushing Valve Wire condenser
Compressor
Water purification filter
Pressurizing pump
Ambient water tank
Cold water tank
Ice storage house
Hot water tank
CONT. take-in water
dispenser touch sensor button

9
44..IInnssttaallllaattiioonnPPrreeccaauuttiioonnss
When installing the product, do not install it at the following places.
•Near fire •Near flammable material •Wet place
•A place exposed to rain and snow •A place exposed to direct sunshine
•Near chemicals(volatile material, organic solvent, etc.) •Dark place
•A place below 32OF(0OC) or a place with the possibility of dropping below 32OF(0OC).
※When the product is installed in a dark place, and the power saving function is
set, then hot the water system may not operate even during daytime.
(Install it at bright place.)
1
When transporting the product, do not tilt it over 45°.
※Severe tilting can be the cause of reduced performance.
2
Install the product at a place where the surface is level, and after installation,
always attempt to adjust the level of the product using a level gauge.
※Tilting of the product can reduce water purification performance and ice making
capability.
3
Leave approximately 8 in(20cm). between the wall, sides and rear surfaces of the prod-
uct so that ventilation may be smoothly performed for safe operation of product.
※This can be the cause of reduced performance and complications.
4
Do not install the rear of the product near any heat radiating plates at rear surface.
5
Use the following water quality range.
•Water pressure : 7~120psi(0.5~8.4kgf/cm2) •Water temperature : 39~100
OF
(4~38
OC
)
•pH : 5~10 •Hardness : 300ppm or less •Evaporated remains : 500ppm or less
•Water quality : Biologically safe water quality
※When using another water quality than the above, discuss it with our company.
※If you do not use water quality within the above range without prior discussion
with our company, the product can be excluded from the stated warranty period.
6
Do not connect hot water(over 100
OF
(38
OC
) to this product.
※This can be the cause of trouble and decline in ice making performance.
7

10
44..IInnssttaallllaattiioonnPPrreeccaauuttiioonnss
Raising the brine water and drained water over 1 ft(30cm). above the installation
surface, or connecting them over 9.84 ft(3M). away from the water purifier can
hinder a smooth drainage process. In order to install the product in a location
where the brine water and drained water line are located a distance of over 9.84
ft(3M). from each, the user will inevitably have to install a separate drainage pump.
10
A bad wall outlet or plug may cause an electric shock or fire, so please do not use
them.
11
When installing another product(water purifier, dish washer, etc.) at the same
location and the water is derived from the same installation source, prepare an
independent drain line for each product.
12
Adjust the hose so that the water discharged from the drainage hose may not
splash onto the product's surroundings.
※Brine water, or the water coming out through drainage lines, can easily be applied
towards other water related needs, such as in bathroom cleaning, house cleaning,
laundering, washing, etc. in order to prevent waste of water.
However, never use the brine water as drinking water or for cooking of food.
9
Drain the product by first removing the bottom front cover of the product and then draining both the hot and cold
residual tanks completely. This is done by opening the drainage valves located in the middle of the product. Then
drain the remaining cold water completely by pressing the water dispenser button with the product tilted forward.
Then draw all the ice out by touching the ICE(ice dispenser) touch sensor button. When transporting the product in
an inclined position, try to tilt the product backwards at all times.
※When moving the product in an inclined position with water not completely drained, the water inside the tank
may come out while moving the product. This could possibly create unwanted damages to the product and sur-
roundings.
Precautions during a Transfer Installation
When connecting tubing hose, take care so that the tubing hose is not be bent
or pressed down by heavy objects, etc.
※If tubing hose is blocked, water does will flow smoothly and can become the
source of problems.
8

11
55..IInnssttaallllaattiioonnMMeetthhoodd
Connect tubing hose into the removed water(brine) and drained water connec-
tion part on the rear side of product and then connect tubing hose into the
drainage hole in sink, bathroom, or multi-purpose room, etc.
※Install the removed water(brine) line and drained water line separately.
If drainage does not function properly due to improper installation, then water
may flow back toward waterspout and cause an overflow.
4
Adjust the tubing hose so that the discharged water(brine) and tap water tubing
hose so that they do not splash into surrounding areas.
5
Open the tap water valve supplied into each household, and place the water
source adaptor to the open position.
6
For stabilization of the cooling system and for safe use of this product, insert the
power plug into an AC 110V/60Hz, 220V/50Hz, 240V/50Hz, and 220V/60Hz
power outlet after 30 minutes after the installation of the product.
※This product is for AC 110V/60Hz, 220V/50Hz, 240V/50Hz, and 220V/60Hz only.
8
Check whether water is supplied into the inside of product and whether there is
any leakage in or around the tubing connections.
9
Check to see if water is leaking at each connection part.
7
Check whether water is supplied into the inside of product and whether there is
any leakage in or around the tubing connections.
10
Use after water has flowed into the storage tanks.
11
Install the product on a level surface.(Change product level using the product leg
adjustment and confirm the level surface a level.)
1
Close off the water supply valve as supplied to each household. Then temporari-
ly remove the connector part as provided from your given water source. Then
connect the main water line adaptor.
※If the sealing O-ring at the connection piece is removed or damaged, it can
lead to leakage.
2
Connect tubing hose into water source adaptor and then attach to the water
inlet on the rear side of product.
3
●Our company's technician will perform the installation. You, as the customer should check if the
product was properly installed.

12
66..UUssaaggee
6-1. Display and System Function Settings(A)
6-2. Operation and Water Dispensing Selection(B)
USB pot
ICE FULL
WATER FULL
HOT LOCK
(Hot water locking selection)
HOT LED
(Hot water operation display LED)
HOT LOCK LED
( Hot water locking LED)
Can do A/S through correct
diagnosis because connect exclu-
sive use PDA, and fill up cellular
phone etc. (within maximum
charge 30 minutes)
Lights up when ice storage house
is full of ice.(Yellow green)
Lights up when storage house is full
of ambient water.(Yellow green)
Used when setting/releasing the
hot water lock function.
Lights up when setting hot water
operation.(Red)
CONT. take-in water
CONT. take-in water LED
Use ON/OFF the function of
CONT. take-in water.
Light on the LED (Red) when you
choose the volume (litter)
Lights up when setting the hot
water locking function.(Red)
HOT
(Hot water selection)
HOT LED
(Hot water selection LED)
COLD/AMBI
COLD LED
(Cold water selection LED )
Used to dispense hot water.
Displays that hot water dispense
was set.(Red)
Used to dispense cold /ambient
water
Displays that cold water dispense
was set.(Blue)
AMBI LED
(Ambient water selection LED)
Water Dispensing Button
ICE
(Ice dispenser)
ICE LED
(Ice dispense LED)
Displays that ambient water
dispense was set.(Yellow green)
Used to dispense water into a container
such as a cup after selecting the desired
water temperature among ambient
water, cold water, and hot water.
Used to dispense ice.
Lights when dispensing ice.(Red)
A
B

13
6. Usage
Division
6-3. Customer Warning Sensor
BEEP Remarks/occurrence
A beep sound following aerations of the IGUASSU ICE 500
6-4. Function Settings and Releasing Methods
(1) Lock Function (Ice Cube / Hot Water Locking Function +
Hot Water Automatic Selection / Release Function) Setting
①Touch LOCK/HOT Touch Button softly for over 3 seconds.
②Lock lamp (red) is turned on and the lock function is set.
(setting sound : Ding~ding~ding~)
③After lock function is set, any function will not operate even
though HOT (hot water operation) or HOT(hot water intake selection),
ICE(ice cube spout) touch button has been selected.
LOCK function helps to prevent spout of ice cube and burns by
hot water due to user’s carelessness.
(2) Lock Function Releasing
①Touch LOCK/HOT Touch Button softly for over 3 seconds.
②Lock lamp (red) is turned o and the lock function is released.
(releasing sound : Ding~ding~ding~)
③If lock function is released, any function will operate even though HOT
(hot water operation) or HOT (hot water intake selection),
ICE (ice cube spout) touch button has been selected.
(3) HOT(hot water) Operation Setting
Touch LOCK/HOT and HOT button simultaneously to turn on the hot water system.
Touch LOCK/HOT and HOT button simultaneously to turn o the hot water system,
when the HOT water system is already turned on.
(Upon setting the HOT operation on, HOT LOCK function will be automatically turned on.
please follow ‘LOCK function Releasing’ as explained as above, in order to use HOT water.)
(4) HOT(hot water) Operation Release
A
Power ON
Touch Button
Lock Function
Water intake Start
Water intake Ending
Con. Water intake Start
Con. Water intake Ending
Drain/Water Level Sensor Error
Beep sound Setting/Releasing
Ding dong dang~
Ding~
Ding~ding~ding~
Ding~
Dong~
Ding dong~
Ding dong~Ding dong~
Ding~ding~ding~ding~
Ding~ding~ding~ding~ding~
Occurrence one time
Occurrence one time
Occurrence one time
Occurrence one time
Occurrence one time
Occurrence one time
Occurrence one time
One second interval
Occurrence one time
1
2
3
4
5
6
7
8
9

14
66..UUssaaggee
(5) ON of the function of CONT. take-in water
①Do continuous water-intake Touch Button Touch for 2 seconds by function that use clear
water, cold water at continuous water-intake time. I select quantity of water intake want-
ing between 0.5 liter, 1.0 liters if continuous water-intake LED is lighted.(when select rele-
vant quantity of water intake red LED on).
②Effect sound is 'Ding dong ~' if proper move water-intake or cold water water-intake
Touch Button presses touch and push button. It becomes continuous water-intake ring-
ing. (Relevant quantity of water-intake LED flicker at continuous water-intake time).
※After if do not water-intake even if selected Continuous take-in water 10
seconds selection. It is released automatically.
※Hot water is incomprehensible Continuous take-in water, and Continuous take-in. The
water selection amount and actual quantity of water intake can be difference.
(6) OFF of the function of CONT. take-in water
①We do Touch. one of clear water, continuous water-intake among cold water continuous
water-intake or proper move water-intake, cold water water-intake Touch Button or Push
Button or as effect sound rings 'Ding-dong ~ Ding-dong ~' in case of press Continuous
take-in water is released. (Continuous take-in water LED 'OFF')
(7) Releasing(Beep)
①If HOT/CONT.(hot water operation/Continuous take-in water) touch sensor
button and HOT(hot water dispenser selection) touch sensor button is simul
taneously touched for over 3 seconds, the function is released.
②When beep function is turned on, ding~ding~ding~ding~ding~ is sounded.
③And, when it is released, HOT LOCK(hot water lock) LED and HOT/CONT.
(how water operation/Continuous take-in water) LED will flash 5 times in one
second intervals.
(8) Resetting(Beep)
①If HOT/CONT.(hot water operation/Continuous take-in water) touch sensor
button and HOT(hot water dispenser selection) touch sensor button is simul
taneously touched for over 3 seconds, beep is reset.
②When beep is turned off, ding~ding~ding~ding~ding~ sound goes off.
③And, when it is released, HOT LOCK(hot water lock) LED and HOT/ECONO
(how water operation/power saving selection) LED will flash 5 times in one
second intervals.

15
66..UUssaaggee
① When Power Plug gets insert, I do drain switch of product back side to do ON.
※ If the drainage switch is turned on, water purification and ice production stops
②Take out the ice by pressing the ICE(ice dispense) touch sensor
③On using Driver after extract Power Plug product whole surface Under
Cover lower part It Removes 2 screws and pulls forward pressing Under
Cover over downward you segregate.
④that is located to left side (ambient and hot water drainage) and right side
(cold water drainage) after Under Cover separation Opening Flushing Valve
Tank internal water perfectly drain.
⑤Combine Front Cover after lock Flushing Valve and separate raw water,
drain water, drain hose etc all.
※
If there is no other option but to transport the product in an inclined position,
transport the product in a backwards inclined position if at all possible.
6-6. Draining the System for Relocation/Installation
(1) Ice Dispensing Mode
If ICE(ice dispense) touch sensor button is pressed, the door of the ice
storage house is opened and ice comes out from the dispensing hole.
(2) Hot Water Dispense Mode
If HOT(hot water selection) touch sensor button is selected and the
water dispensing button is pressed, hot water comes out.
※If HOT LOCK(hot water lock) is set, then hot water does not come
out even though the water dispensing button is pressed.
※If HOT LOCK(hot water lock) function is released, the water in the
hot water tank can be taken by selecting HOT(hot water selection)
touch sensor button and pressing the water dispensing button.
(3) Cold Water Dispense Mode
If COLD(cold water selection) touch sensor button is selected and water
dispensing button is pressed, cold water comes out.
※After early power ON water full LED is lighted up, cold water water-intake
selection is available.
(4) Ambient Water Dispense Mode
If AMBI(ambient water selection) touch sensor button is selected and water
dispensing button is pressed, ambient water comes out.
※If hot water or ambient water is selected and it is not used for a given time
period(Ambient : 10 second, Hot water L 5second) the system will automatically
switch into cold water dispense mode. (Default function)
※There is not a separate setting and release method for the use of ambient
water/cold water/ice making operation. They operate automatically as
designated by the program when the power is supplied.
6-5. Ice and Water Dispensing Method
B
It can be the Spout of Ice Cube and Hot water intake that the lock function is released.
※Lock Function (Ice Cube / Hot Water Locking Function + Hot Water Automatic Selection / Release Function).
Setting the Ice Cube / Hot water locking function using Lock / Hot touch sensor button prevents Ice Cube and
Hot Water from being dispensed from the unit. Please use it after releasing of LOCK FUNCTION.
Flushing Valve

16
66..UUssaaggee
6-7. Understanding the Ice Making Process and Operation
①If power is supplied to the product by inserting the power plug, then ice making automatically operates without any
manual setting.
②Upon the initial application of power, if the level of purified water goes above proper operating levels, then all the
ice created from the machine will be automatically removed by deicing action.
③In order to be produced cold water, the compressor and circulation pump must operate properly.
(The cold water production process automatically operates according to designated programming.)
•Cold water operation : This refers to an operation that makes cold water by continuously circulating
and supplying water into the cold water tank.
Water temperature in the cold water tank is automatically checked by the cold
water temperature sensor, and if it drops below the set temperature, then the
cold water operation will automatically stop.
④If cold water production is operating properly, the ice making system will produce the ice according to the given
water supply.
•Water supply action : This refers to an action to supply about .25G(1ℓ) of cold water every 50 seconds
into ice making mechanism in order to make ice.
•Ice making action : This refers to the making of ice by way of an ice tray by supplying cold refrigerant
onto the ice tray as it is filled with water.
•Harvest action : This refers to an action to separate the ice created in the ice tray by supplying hot
refrigerant onto the tray.
⑤When the ice storage house is full, the ice detection sensor will automatically stop the process.
⑥Cold temperature control is applied to prevent ice cubes from melting by periodically sending cold air into ice stor-
age house.
⑦If ice in the storage house is not used for long periods of time, it may melt, and during ice dispensing, small ice cubes
can come out.
※TDS(Total Dissolved Solids) of ice may increase according to the environment in which the ice is created.
The ice making system of the IGUASSU ICE automatically operates according to designed program settings
after applying power to the product.
•The lower the surrounding temperatures, the shorter the ice making process will become and
the higher the surrounding temperatures, the longer the ice making process will become.
•Do not install or use the product in temperatures below 32℉(0℃) and above 100℉(38℃).

17
77..CCaauuttiioonnssdduurriinnggUUssee
(1) For safety reasons, insert the power plug into the power outlet 30 minutes after
installation.
(2) This product is for AC 110V/60Hz, 220V/50Hz, 240V/50Hz, and 220V/60Hz only.
Please connect to the proper power source.
(3) Do not connect multiple electric appliances into the same wall outlet.
(This can be lead to fire.)
(4) Never move the product while in operation.(This can cause unwanted problems.)
(5) The temperature of the radiator plate on the rear side of product is hot while the
product is in operation, so take care not to touch it.
(6) When power is disconnected to the product due to power outage, etc. wait 5 minutes
and then attempt to re-connect the product.
(7) When the product is not used for long periods of time.
•Pull the power cord out after closing off the source water.
•Do not touch the power plug with wet hands.(There is danger of electric shock or fire.)
(8) Avoid the use of chemicals around the product(volatile material, inorganic solvent, etc.)
and do not place chemicals near the product.
(9) Do not supply water above 100OF(38OC) to the product.
(10) If an abnormal sound, smell, or smoke appears from the product during use, then
pull out the power plug immediately, close of the source water at the adaptor
valve, and then contact A/S.(There is danger of electric shock or fire.)
(11) When ice is not dispensed upon pressing the ICE(ice dispense) touch sensor
button, do not shake the product nor strike the product.
(This can cause an immediate reduced product performance.)
(12) When removing ice from the ice dispenser by pressing the ICE(ice dispense) touch
sensor button, avoid using a glass cup.(Glass cups can be broken by abrupt
temperature change or as the ice cube strikes the glass.)
(13) You can always reuse this quality ice by placing the ice in a separate storage
vessel and storing it in the refrigerator/freezer.
(14) Do not put foreign elements into the waterspout. This can cause blocking of the
water dispenser.(Blocking the water dispenser can cause reduced performance and
other unwanted consequences.)
(15) If an operation does not function properly, even though the touch sensor button
has been applied, broaden the contact area of which the touch sensor button is
pressed.(using your thumb, etc.)
(16) Occasionally ice will not come out because it is caught in ice dispenser hole. In
such a case, remove the ice caught in dispenser hole with your(finger, etc.) and
then attempt again.
(17) Occasionally, ice will not come out smoothly because it can be stuck each other if
you do not use ice for many hours. In such a case, please touch ICE(ice dispensing)
touch button twice or three times for 2~3 seconds.
(18) Please use the product 3.28 ft(1M) away from wireless machinery and tools.
(If using the product 3.28 ft(1M) close to wireless machinery and tools, may cause
mis-operation.)

18
88..FFiilltteerrssaannddRReeppllaacceemmeenntt
Filter kind Exchange time
Sediment filter About 6 months
Pre-carbon filter 12 months
Membrane filter 24 months
Post-carbon filter 18 months
※Filter exchange time is not included within the standard
warranty period. The ideal filter exchange time is based on
the use of 5.28G(20ℓ) per day.
※Exchange time of filters can differ depending on location,
water quality, tap water temperature, quantity of water
used, and seasons(summer, winter).
※
You can only expect to drink clean water by exchanging fil-
ters according to the recommended filter exchange schedule.
8-1. Filter Functions
8-2. Filter Exchange Time
Sediment filter
The Sediment filter removes particles and pollutants that are over 5㎛from the
water. This helps to extend the life of the membrane filter.
Pre-carbon filter
The Pre-Carbon filter, made from high temperature processed carbon, collects
chlorine, THMs and organic chemical contaminants through an absorption process.
This protects the membrane and helps it function properly.
Membrane filter
The Membrane filter removes dissolved pollutants(with a molecular weight over
200, such as heavy metals, bacteria and chemical contaminants) via micro-filtra-
tion through a semi-permeable membrane(0.0001㎛pore.)
Post-carbon filter
The Post-Carbon filter removes dissolved gases and odors to ensure a natural tast-
ing water.

1 9
99..PPrroodduuccttSSppeecciiffiiccaattiioonn
Product name
Model name
Rated voltage
External dimension
Monthly consumed power quantity
Weather class
Rated consumed power
Hot water
Cold water / Ice making
Consumed
power
Ambient water
Hot water/Cold water
Ice
Surrounding temperature
Required time
Daily ice making quantity
(60Hz/50Hz)
Daily maximum ice making
quantity
(60Hz/50Hz)
Ice size
Storage
house
Ice making
capability
(This can
differ
depending
on
surounding
tempera-
ture.)
IGUASSU ICE 500
CHP-5110S
AC 110V/60Hz, 220V/50Hz, 240V/50Hz, and 220V/60Hz
295W X 384D X 1170H(mm)
500W(hot water+ ice making)
500W
105W
1.58G(6.0ℓ)
.39G/.55G(1.5ℓ/2.1ℓ)
2.6lbs.(1.2kg)
48.5kWh/month
N class(90℉±1℉(32℃±1℃))
13g±1gX12ea/one time ice making
(1ea cold water tank submerging)
WIRE CONDENSER TYPE(natural convection)
THERMISTOR
Bimetal(automatic return)
Bimetal(manual return)
Overheating prevention system,
water level detecting system
Capacitance sensor
R-134a(85g±1g)
78.2 lbs.(35.5kg)
2.5m
IPX1
68℉(20℃)86℉(30℃)
13minutes±1minute/
one time ice making
17minutes±1minute/
one time ice making
17 lbs(8kg)/day(60Hz) 13 lbs(6kg)/day(60Hz)
17 lbs(8kg)/day (60Hz)
(when surrounding temperature is 68℉(20℃)
Heat radiation type
Cold water temperature regulation
Hot water temperature regulation
Overheating prevention system
Safety system
Cold water tank water level adjust-
ment Refrigerant/Refrigerant weight
Product weight
Power cord
IP class