Cisco MPP 6851 Manual

Basic IP Desk
Phone (Cisco
MPP 6851)
Set up instructions

Contained in the box (please note, cables may vary in colour)
*Optional Add-On
Basic IP Desk Phone (Cisco MPP 6851)
Set up instructions
Power
Cable*
Connect the basic IP desk phone to the foot stand
Take the foot stand and connect it into the back of the phone D.
Make sure the Cisco logo is facing outwards.
1
2
3
A
Network
Cable (RJ45)
C
Basic IP Desk Phone
(Cisco MPP 6851)
D
Handset
AUX
DC 5V
Set up videos and user guides can be found here: vodafone.co.nz/vobextras
AUX
DC 5V
cisco
cisco
F
Foot StandHandset
Cable
B
Connect the basic IP desk phone to the internet
Take the network cable Cand plug it into the NETWORK port at the back of the
phone D. Tuck the cable into the horizontal cable slot. Then plug the other end
of the cable into a spare internet connected LAN port on your modem or switch.
D
D
B
Connect the basic IP desk phone to the handset
Take the long end of the handset cable Band plug it into the HANDSET jack at the
back of the phone D. Next, plug the short end of the cable into the bottom of the
handset . Tuck the cable into the horizontal cable slot on the back of the phone.
F
E

Basic IP Desk Phone (Cisco MPP 6851)
Set up instructions
Connect power to the basic IP desk phone(optional)
If you have purchased the optional power cable Afor your phone D,
connect it to the POWER input port and plug the other end into a power source.
Applying conguration
After a few moments, the phone will apply its conguration and finish powering up.
Ready to provision
The phone is ready to provision when you see
the account setup screen. Go to the next step
to retrieve your device username and password.
4
5
6
Profile account setup (HTTP)
Username
Password
Option Sign in
Profile account setup (HTTP)
Username
Password
Option Sign in
AUX
DC 5V
D
C
5
V
IMPORTANT: please follow steps 6 – 8 carefully
If your switch supports Power over Ethernet (PoE), the phone will begin powering up
– go to step 5.
Retrieve device username and password
(a) You must go to the self-service portal:
https://vodafone.xport.co.nz/mydevice or scan the QR
code to retrieve the username and password for the phone.
(b) To log into the self-service portal use the login details from
your ‘Vodafone One Business Online Portal Login’ email.
7
Modem/Switch
AUX
DC 5V
D
CC
D
A

Check out our quick start guides and help videos on
how to use your phone at: vodafone.co.nz/vobextras
For FAQs visit:
vodafone.co.nz/onebusinessfaqs
V D A1714
Ready to use
Congratulations, your phone is now ready to use. You will see your
username, phone number and menu options displayed on the screen.
9
5:30 AM John Smith 3/02/20
091234567
Username
Menu options
Navigation
cluster
Phone number
Enter device username and password into the phone
Enter your device username and password retrieved from the
self-service portal into the phone.
Example format:
Username: 120000#00001 then press Down
Password: 11223344 then press the Sign In button.*
The phone will apply its conguration and power up once more.
8
*If you enter your device details incorrectly or if a warning message displays as:
“Verify your provisioning settings or contact your service provider”, press Cancel.
If “Error with sign in credentials, contact your administrator” appears, press OK.
This should return you to the account setup screen.
If you exit the account setup screen and can no longer sign in, restart the phone
by unplugging the network cable. Allow several minutes.
OK