Citizen 6P28 User manual

FEATURES : ANALOG MULTI-FUNCTION QUARTZ WATCH WITH 24HOUR
A) DISPLAY
B) OPERATION PROCEDURE
C) SETTING THE TIME (HOUR, 24 HOUR, MINUTE AND SECOND)
A) DISPLAY
B) OPERATION PROCEDURE
1 SETTING THE TIME (HOUR, 24HOUR, MINUTE and SECOND)
Cal. 6P28 Instruction manual
24HOUR HAND
HOUR HAND
SECOND HAND
MINUTE HAND
NORMAL CROWN POSITION
1ST POSITION
TIME SETTING (CLOCKWISE)
NORMAL CROWN POSITION
1ST POSITION
1 / 2

C) SETTING THE TIME (HOUR, 24 HOUR, MINUTE AND SECOND)
The hour, 24 hour, minute and second are set by the same operation.
SETTING PROCEDURE
Pull the crown out to the 1st position to stop the second hand at 0 (12 o'clock).
Turn the hour/minute hands in a clockwise direction to set the time.
To ensure time is set accurately, first turn the minute hand 5 minutes ahead of desired
time and then turn back (in a counterclockwise) to the desired time.
After setting the time, use a time signal to synchronize the watch by pushing crown to
the normal position to start the second hand going.
NOTE: Make sure you have correctly set AM/PM before setting the time.
These specifications might be changed without prior notice.
HOUR&24HOUR
MINUTE
SECOND
2 / 2