Clam Corp Thermal X 8280 User manual

Clam Corporation, Inc. Manual – 102109
Model No.
- 8280 -
p/n 108305
Specifications
ŀHeight: 75” (23” packed)
ŀLength: 72” (72” packed)
ŀDepth: 92” (40” packed)
ŀWeight: 135 lbs.
- Clam Customer Service Information -
NOTICE!! Once used, this shelter cannot be returned to the store. If you have a
Warranty Claim, please contact Clam Corporation Customer Service by email
inquiry or direct by calling:
ŀCustomer Service Hrs: - 8am to 4pm, Mon. - Fri. Central Standard Time
ŀClam Corporation, Inc.
600 Clydesdale Trail
Medina, MN 55340
ŀPhone - 763-231-4120
ŀFax - 763-231-4121
ŀWebsite – www.clamcorp.com
ŀEmail – [email protected]

2
- Parts List-
Item Qty p/n Description
1 8 101048 Slide Block
2 18 101081 1/4" Flat Washer
3 34 101082 1/4" Thin Locknut
4 8 101088 1/4" Dia. X 3/4" Long Phillips Screw
5 1 101095 Tow Rope
6 4 101146 1-1/2" X 1-3/4" Aluminum Angle X 9" Long
7 8 101147 #10 X 1" Long Phillips Screw
8 2 101399 Seat Swivel Assembly
9 2 101420 Front Seat Bracket
10 2 101424 Rear Seat Bracket
11 8 101429 1-1/8" Dia. Tube Cap
12 2 101430 1" x 2" Rectangular Tube Cap
13 2 101442 Latch Clip
14 1 101458 Center Console
15 2 101466 Cloth Accessory Hammock
16 16 101470 1/4" Dia. X 1/2" Long Hex Head Screw
17 10 101486 1/4" Dia. X 1-3/4" Long Phillips Screw
18 4 101652 1-1/8" Dia. Tube
19 2 101810 Canopy Bracket
20 2 101836 Front Adjustable Spreader Pole
21 1 101839 Long Roof Spreader Pole
22 2 101840 Rear Adjustable Spreader Pole
23 2 101905 Folding Seat Assembly
24 8 101906 1/4" Dia. X 2-1/2" Long Phillips Screw
25 17 101938 #8 X 1/2" Long Phillips Screw
26 4 102071 Canopy Hoop Pole
27 1 102078 Short Roof Spreader Pole
28 6 102073 Straight Canopy Pole
29 2 102074 Bent Canopy Pole
30 1 102080 U-Channel Molding
31 1 102081 Thermal-X Base
32 1 102082 1" X 2" Rectangular Support Tube
33 2 102083 Rail Hanger Bracket
34 1 102137 Thermal-X Tent

3
- Parts Diagram-

4
- Step One -

5
- Step Two -

6
- Step Three -

7
- Step Four -

8
- Step Five -

9
- Step Six -

10
- Step Seven -

11
- Step Eight -

12
- Step Nine -

13
- Step Ten -

14
- Step Eleven -

15
- Tips for Use -
Folding and transporting your Fish Trap is easy:
ŀUnsnap the Roof Spreader Poles, Rear Spreader Poles, and Front Spreader Poles. Lay them in the bottom
of the base.
ŀPush the spring buttons and retract each hoop, starting with the rear hoop and working towards the
front. Rotate all retracted hoops to the resting position. Tuck the tent into the base and between the
hoops so that no material is left hanging on the ground for transport.
ŀCover with the Travel Cover* (an optional but recommended accessory to help prolong the life of the
unit). Tow the unit out to your favorite fishing spot! (NOTE: continuous pulling behind an ATV or
snowmobile may result in premature wear of the base. We recommend the optional Wear Strips* be
mounted to the base of your Fish Trap).
Make sure your Ice Shelter is completely dried out before storing for long periods of time. Store your Ice
Shelter in a cool, dry place. Keep away from rodents.
*See our accessory catalog or www.clamcorp.com for these items and more!
- Safety Instructions -
Please fully understand and follow all safety instructions as outlined. Failure to do so could result in
severe injury or death.
ŀDo not use open flame heaters in your ice shelter. Injury or death may result from fire if tent fabric is
exposed to open flame. The tent is not fireproof, but the fabric is treated with a fire retardant that meets
CPAI-84 specifications. Application of any foreign substance may render the flame retardant properties
ineffective. Ice Armor fabric will melt when contact is made with hot surfaces (i.e., heaters).
ŀDeath from asphyxiation may result from use of oxygen depleting heaters. Open all vents for fresh air
ventilation.
ŀNever leave shelter unattended when set up.
ŀDue to the increase in traffic (snowmobiles, autos, etc.) on area lakes, ice fishing can be hazardous at
night. If you choose to fish at night or in poor visibility conditions, be sure to take precautions with
lights or reflectors to show drivers your whereabouts. Night time: exterior reflectors must be visible to
reduce risk of collisions.
- Warranty -
Clam Corporation, Inc. warrants to the original retail purchaser that all Clams are free from
manufacturer’s defects for one (1) year from the date of the original purchase. Warranty does not cover
cracked windows, tent tears, broken or bent hoops due to high wind weather conditions or unattended
use. Clam Corporation will replace or repair any part found defective within the one (1) year time limit. All
parts must be returned to Clam Corporation, Inc. Before returning any parts, you must first call or write
and acquire a return authorization. All returns must be returned postage-prepaid and include the original
cash register receipt (date and purchase price).
Note: Please write the return authorization number on the outside of the package with the
return article to help ensure the transaction gets processed swiftly and accurately.
- Limitation of Liability -
It is expressly understood that Clam Corporation liability for its products, whether due to breach of
warranty, negligence, strict liability, or otherwise, is limited to the repair of the product as stated above.
Clam Corporation is not liable for any injury, loss, damage, or expense, whether direct or consequential,
including but not limited to loss of use, income, profit, or damage to material arising in connection with
the sale, installation, use of, inability to use, or the repair or replacement of Clam Corporation products.
Clam Corporation reserves the right to make alterations or modifications in its products at any time, which
in its opinion, may improve the performance and efficiency of the product. It shall not be obligated to
make such alterations or modifications to products already in service.