Clarke HDT855 User manual

ASSEMBLY INSTRUCTIONS
Please keep these instructions in a safe place for future reference.
GC05/13
FOLDING TABLES
Models: HDT855 & HDT1200
Part Nos: 3501035 & 3501030

2
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
INTRODUCTION
Thank you for purchasing this CLARKE product. Before use be sure to read
these instructions thoroughly. In doing so you will ensure the safety of yourself
and of others around you, and you can look forward to the product giving
you long and satisfactory service.
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of
12 months from the date of purchase. Please keep your receipt as proof of
purchase. This guarantee is invalid if the product is found to have been
abused or tampered with in any way, or not used for its intended purpose.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission. This guarantee does not effect
your statutory rights.
SPECIFICATIONS
SAFETY PRECAUTIONS
Failure to comply with these warnings could result in serious personal injury or
property damage.
1. Do not exceed the load capacity of the table. (Maximum load 100 kg).
2. Do not stand on the table. Falling could result in personnal injury.
3. Do not put hot dishes or items (over 100oC) directly on the table.
4. Do not position close to naked flames or sources of ignition.
USING THE 855 TABLE
1. Lay the top face down on a soft
surface to protect the top from
scratches.
2. Unfold the legs completely by
placing one foot on the table as
shown and pulling the legs
towards you as in Fig 1.
3. Pull the legs until they form a right
angle with the table top.
FIG 1
558TDH 0021TDH
thgieWgk54.9gk52.9
mm)hxwxl(snoisnemiDmm937x768x768mm537x316x5221
yticapaCdaoLxaMgk521gk521

3
Parts & Service: 020 8988 7400/E-mail:Part[email protected] or [email protected]
4. Ensure that the arms are straight
and that locking tabs engage with
the slots in the corresponding arm
member as shown in Fig 2.
CAUTION: TAKE CARE NOT TO
PINCH YOUR FINGERS
BETWEEN THE HINGED ARM
COMPONENTS WHERE SHOWN
IN FIG 2.
5. When folding the table away, the
legs, which are retained by the
spring clip must be folded last, as
these will retain the first pair of legs
as in Fig 3.
6. Store the table on its side – avoid
laying flat, or under heavy
pressure.
USING THE 1200 TABLE
1. Lay the table with the legs up and
completely unfold them.
2. Pull the legs until they form a right
angle with the table top before
turning the table over.
3. Ensure that the metal rings slide
down into position as in Fig 4, to
prevent the hinged leg assemblies
from folding up inadvertently.
4. When folding the table away,
ensure the legs are retained by
the spring clips shown in Fig 5.
5. Store the table on its side – avoid
laying flat, or under heavy
pressure
ENVIRONMENTAL PROTECTION
Do not dispose of this product
or any unwanted materials with
general household waste. All
tools, accessories and packaging
should be sorted, taken to a recycling
centre and disposed of in a manner which is compatable with the
environment.
FIG 2
Locking Tab
Arm
Spring Clip
FIG 3
FIG 4
FIG 5
Spring Clip
Metal Ring