Clarke CC76 Quick start guide

ASSEMBLY
INSTRUCTIONS
LS0115
2 DOOR TALL LOCKER CABINET
MODEL NO: CC76
PART NO: 7642030

2
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
INTRODUCTION
Thank you for purchasing this CLARKE product.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
SPECIFICATION
Dimensions 762 x 460 x 1575 mm
Maximum Load Per Shelf 24 kg
Maximum Load Total 80 kg

3
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
WHAT IS SUPPLIED
No Description Qty
1MainFrame 1
2TopPanel 1
3 Base Panel 1
4 Shelf 3
5Bracket 4
6 Shelf Locking Pins 18
7Bolts 16
8Key 2
9 Adjustable Foot 4

4
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
ASSEMBLY
1. Open out the main frame as
shown.
2. Screw the 4 adjustable feet into
the bottom of the base
3. Place the main frame over the
base as shown.
4. You may need help doing this.
5. Join the main frame to the
bottom panel using the
brackets and bolts supplied.
• Insert the bolts from the outside.
6. Repeat with the top panel.
• Note the position of the Clarke
logo for orientaion.

5
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
7. Insert the shelf at the required
height.
• Make sure that all the tabs on
the shelf locate into the slots in
the main frame.
8. Lock the shelf into position using
the locking pins provided.
• The locking pins are inserted
from the outside.
9. Repeat with the remaining
shelves.
•Themaximum load for each
shelf is 24 kg. Do not exceed the
amount.
10. The cabinet is now ready to use.
11. Each foot can be screwed in or
out to account for uneven
floors, Make sure that the
cabinet is level before use.

6
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]

7
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
NOTES