2
English
Radio Controlled Projection Clock
Art.no 36-5338 Model pcr156
Please read theentire instruction manual before using theproduct and save it
for future reference. We reserve theright for any errors in text or images and any
necessary changes made to technical data. If you have any questions regarding
technical problems please contact our Customer Services.
Things to consider:
• Other wireless equipment using thesame frequency can reduce thetransmission range.
• The range of all wireless equipment depends on thetype of obstacles located
between thetransmitter and thereceiver (e.g. aconcrete wall will interfere with
thesignal more than aplasterboard wall).
If you experience problems, try thefollowing:
• Turn off any other existing wireless equipment and check if this is thecause of
the problem.
• Move any other existing wireless equipment. Shorten thedistance between
thesending and receiving devices and reduce thenumber of obstacles (walls,
furniture, etc.) between them.
What is aradio controlled clock?
A radio controlled clock is extremely accurate timekeeping device. The time is controlled
by theatomic clock in Braunschweig, Germany (accuracy ±1 second per 1 million
years). The clock has and built -in radio receiver that decodes theincoming atomic
clock signal (long wave 77.5 kHz). The product also has anprecisely calibrated quartz
clock movement with afrequency of 32 kHz that keeps it running. The transmitter in
Germany has anofficial range of 2,000 km. This means that the UK and Ireland should
be well within range.
Safety
• The projector clock must only be repaired by qualified service technicians.
• The projector clock is for indoor use only.
• Do not position the product where it is exposed to moisture or splashing water.
• Do not place theproduct where there is arisk of it falling into water or other liquid.
• Do not place theclock in damp, dusty environments or where there is
anoccurrence of strong vibrations.
• Do not expose theprojector clock to extreme high or low temperature shifts.
Do not expose theproduct to direct sunlight.
• Never try to open, change or modify theproduct in any way.
• Always remove thebatteries if theprojector clock is not to be used for along period.
• Make sure that the wall socket into which the mains lead is plugged is accessible,
since the mains lead is used to disconnect the product from the supply.
