
Press 4 seconds simultaneously
Press for 6 seconds
Function keys
Automatic control. The room ventilation is controlled automatically by your ClimaRad
S-Fan, which ventilates on the basis of CO and RH measurements.
2
AUTO
Pause/Off. Use this function if you (temporarily) do not want to ventilate. After a
period of 4 hours, the ClimaRad S-Fan switches back to the automatic setting. When
the button is pressed for 5 seconds, the unit switches off. In case of emergencies you
can use this function to switch off the device.
Child lock. PThe child lock is switched on. ress and hold the
three buttons for 4 seconds to switch it off.
No function.
No function.
Malfunction. A malfunction has occurred. Contact your
technician or housing corporation.
Manual: manual ventilation using outside air:
You can set your desired ventilation speed with the + and – keys on the control panel.
After a period of 8 hours, the ClimaRad S-Fan will switch back to the automatic
setting. Use this function for example when you want to lower the temperature in
your bedroom by a few degrees at night in the summer (summer night ventilation).
Messages Switch off
ClimaRad
B.V
.
-
Lübeckstraat
25
-
7575
EE
-
Oldenzaal
-
NL
-
[email protected] -
www
.climarad.co.uk
-
tel.
+31
541
358130
Dirty Filter. Replace the air filter or contact your technician
or housing corporation. After replacement, press and hold
the + and – buttons for 6 seconds.
Pairing. The ClimaRad S-Fan can be linked to other
ClimaRad products. Press the button briefly ands
simultaneously.
•
••
•••
Child lock. The child lock will be activated when you press and hold the three buttons
on the panel for 4 seconds.
•••
•••
Press briefly and simultaneously
Future comfort today