UNIS TICKET DOME User manual

Operation Manual
IMPORTANT

Treasure Dome RFID Prototype Manual
11/15/2019
1
WE ARE HERE TO ASSIST
For parts and service
Have Questions? Contact us!
UNIS SERVICE CENTER
Tel: [phone]
Email: [e-mail]

Treasure Dome RFID Prototype Manual
11/15/2019
2
CONTENT
IMPORTANT SAFETY INSTRUCTIONS.......................................................................3
1. SPECIFICATIONS....................................................................................................5
2. CONTENTS OF THE ACCESSORY KIT................................................................... 6
3. PART NAME............................................................................................................7
4. SET UP & INSTALLATION...................................................................................... 8
5. HOW TO PLAY......................................................................................................16
6. GAME OPTION..................................................................................................... 17
7. TROUBLESHOOTING............................................................................................25
8. MAINTENANCE & INSPECTION..........................................................................25
9. OVERALL CONSTRUCTION................................................................................. 26
10. WIRING DIAGRAM............................................................................................37

Treasure Dome RFID Prototype Manual
11/15/2019
3
Thank you for purchasing Ticket Dome RFID. We hope you enjoy the product.
This manual contains valuable information about how to operate and maintain your game
machine properly and safely. It is intended for the owner and/or personnel in charge of
product operation. Carefully read and understand the instructions.
If you need any help during installation and setup please utilize this manual and
troubleshooting guide. If the product fails to function properly, non-technical personnel
should under no circumstance attempt to service the machine. Contact your distributor or
manufacturer for help.
Before use, please read IMPORTANT SAFETY INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
To ensure the safe usage of this product, carefully read and
understand these instructions before operating your game.
Save these instructions for future reference.
Use this product only as described in this manual. Other uses not recommended may
cause fire, electric shock or personal injury. Unplug the game from the outlet when not in
use, when moving from one location to another, and before cleaning/servicing.
Explanations which require special attention are indicated by signs of warning. Depending
on the potential hazardous degree, the terms: NOTE,NOTICE, and WARNING are used.
NOTE: A NOTE indicates useful hints or information about product usage.
NOTICE: A NOTICE indicates potential damage to product and how to avoid the problem.
WARNING: A WARNING indicates a potential for product damage or serious personal Injury.
It is important to understand the meaning of the following HAZARD SIGNS before
continuing:
High Voltage and Shock Hazard:
High voltage can cause electric shock.
Turn off/unplug power before servicing.
High Temperature Hazard:
This part may cause scalding.
Do not touch. Surface may be hot.
No Touching Hazard:
This part may be hot or can cause electric shock.
Do not touch.

Treasure Dome RFID Prototype Manual
11/15/2019
4
Use the following safety guidelines to help ensure your own personal safety and to help
protect your equipment and surrounding environment from potential damage.
This product is an indoor game machine. Do not install outdoors.
Avoid installing in the following places to prevent fire, electric shock, injury
and/or machine malfunctioning:
Places subject to rain/moisture, or places subject to high humidity.
Places subject to direct sunlight, or places subject to extremely hot or cold
temperatures to ensure that it is used within the specified operating range.
Places where inflammable gas may be present or in the vicinity of highly
inflammable/volatile chemicals or items that can easily catch fire.
On unstable or sloped surfaces. The machine may topple or cause unforeseen
accidents.
Vicinity of fire exits, fire extinguishers etc that may block/prevent safety measures.
IMPORTANT NOTE:
ALL REPAIRS MUST BE DONE TO ORIGINAL MANUFACTURER SPECIFICATIONS.
FAILURE TO DO SO VOID ALL WARRANTIES AND OPERATOR ASSUMES ALL
RISKS.
Note: The contents of this manual may be updated without notice.

Treasure Dome RFID Prototype Manual
11/15/2019
5
1. SPECIFICATIONS
Rated power supply: AC110V 50/60Hz; AC220V 50/60Hz
Min. Power consumption: 240W
Max. Power consumption: 350W
Dimension:Width: 58.66’’ (1490mm)
Depth: 58.66’’ (1490mm)
Height: 56.92’’(1446mm)
Weight：Approximately 380.37 lb (345kg)
Model No: T-351
NOTICE: After turning off the game, please wait at least 1 minute
before restarting again.
Note: Game specifications are subject to change without notice.

Treasure Dome RFID Prototype Manual
11/15/2019
6
2. CONTENTS OF THE ACCESSORY KIT
Open the package and make sure all the items are included:
Following accessories
NOTE: Part models are subject to change without notice.
No.
Name
Spec.
Qty
Picture
1
Manual
English
1
2
Key
171A
1
3
Key
171B
1
4
Power cord
1.8M
1
5
Fuse
6.3A
1
6
Micro Switch
D3V-6G-1C24
3
7
Optical coupler
/
4
8
Extended line
1.2M (Maintenance and use)
1
/

Treasure Dome RFID Prototype Manual
11/15/2019
7
3. PART NAME
Key Components
Button
Speaker
Coin mechanism
Ticket dispenser
Marquee
Scoop

Treasure Dome RFID Prototype Manual
11/15/2019
8
leveler
4. SET UP & INSTALLATION
This product is an indoor game machine. Do not install outdoors.
Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 3) for places to avoid
Place the unit on a dry level surface
Ventilation openings in the back of the unit must not be obstructed by objects or by
wall.
4.1 Transporting the Game
If you need to move the game, adjust the levelers back to an “up” position.
NOTICE
Be careful not to damage the machine during transport.
Always unplug the game before moving.
For longer distance transport, package the game properly to prevent damages.
Please keep the machine in upright position during transport.
We do not recommend using power tools as they may cause damage.
NOTICE

Treasure Dome RFID Prototype Manual
11/15/2019
9
leveler
This procedure requires 4 people assistance.
4.2 Level Adjustment
Install this game on a flat surface. If the game is installed on an unsuitable floor, it could
cause game malfunction.
To secure the game, loosen the nut, utilize wrench to adjust the leveler down until it
touches the floor, lifting the casters off the ground by 0.2 in. Repeat the same for all
levelers.
NOTICE
Make sure the machine is level.

Treasure Dome RFID Prototype Manual
11/15/2019
10
4.3 Play Zone
This machine requires space for playing and for maintenance as shown below.
Leave space around the game upon installation:
Play area: 20 in
Play area

Treasure Dome RFID Prototype Manual
11/15/2019
11
4.4 Machine Installation
Before processing, assure you have the following tools.
No
Name
Picture
1
Phillips screwdriver
2
Socket wrench
3
Allen wrench
4
Spanner
Marquee Installation
Step 1 Utilize Allen wrench to loosen 8 screws to remove Marquee base plate.
Step 2 Place Marquee support plate on the Marquee as indicated. Connect the 2 connector
to Marquee.
Screw
Marquee base plate
Connector
Connector

Treasure Dome RFID Prototype Manual
11/15/2019
12
Step 3 Utilize Phillips screwdriver and Spanner to tighten 4 screws and nuts to the Marquee
support plate.
Step 4 Place Marquee bracket on the Marquee support plate. Utilize cable tie to tie the
cable as indicated. Utilize Socket wrench to tighten 2 nuts to Marquee bracket.
Step 5 Place Marquee base plate back and utilize screws to tighten Marquee.
Name
Cross recessed pan
head screw
SPEC
M5X10
Qty
4
Name
Flange nut
SPEC
M5
Qty
4
Name
Nut
SPEC
M5
Qty
2
Screw
Marquee base plate
Cable tie
Nut
Marquee bracket

Treasure Dome RFID Prototype Manual
11/15/2019
13
Blue player
Purple player
bracket
bracket
Step 6 Open the service door between Purple player and Blue player. Power on the
machine. Turn the Switch to UP side.
Step 7 Utilize Phillips screwdriver to loosen 2 screws and cotter pin to remove Cover.
Step 8 Place Marquee assembly on the machine as indicated. Open the Service door
between Red player and Yellow player to connect the 8 port connector. Open the Service
door between Blue player and Purple player to connect the 6 port connector.
Screws
cotter pin
Cover

Treasure Dome RFID Prototype Manual
11/15/2019
14
Step 9 Utilize Phillips screwdriver and Spanner to tighten 4 screws, 4 flange nuts, 4 spring
washers, and 4 flat washers to Marquee support bracket.
Step 10 The rest installation method of Marquee please refer to Step 6-Step 7 in reversed
order.
Name
Cross recessed pan
head screw
SPEC
M4×16
Qty
4
Name
Flange nut
SPEC
M4
Qty
4
Name
Spring washer
SPEC
Ø4
Qty
4
Name
Flat washer
SPEC
4×8
Qty
4
Connector
Connector
Screw

Treasure Dome RFID Prototype Manual
11/15/2019
15
RFID Reader Installation
Step 1 Open the service door between Purple player and Blue player.Turn over the RFID
reader and install it on the top of the M3 board as indicated.
Step 2 Connect 6 cables to the RFID reader. (J41 to ANT1;J41 to ANT2;J43 to ANT3;J44 to
ANT4;J45 to ANT5;)
Finish!
Cable
Audio cable
J41-J44 cable
1 2 3 4
Audio port
Port
RFID reader
front side

Treasure Dome RFID Prototype Manual
11/15/2019
16
5. HOW TO PLAY
1 Please insert coin(s) /swipe card to play.
2 Aim at prizes and press Button to scoop the prizes on the turn table.
3 Prizes drop down to be collected. This will activate the BONUS feature above.
4 Press Button to stop the spinning feature and try to land on “Win BONUS” for more
prizes!
Prizes drop down
and push to win
more prizes.
Note: Do not put more
than 4.4lb prizes totally
on the plate. Otherwise
the motor will be
damaged.

Treasure Dome RFID Prototype Manual
11/15/2019
17
6. GAME OPTION
6.1 Ticket Dome I/O chart:
Item
Value
SW1
1
2
3
4
5
6
7
8
Coin Per Game
1/4
off
off
off
1/3
on
off
off
1/2
off
on
off
1/1
on
on
off
2/1
off
off
on
3/1
on
off
on
4/1
off
on
on
5/1
on
on
on
Scoop Times*
4
off
off
8
on
off
12
off
on
16
on
on
Demo Music
NO
off
YES
on
Game Mode
Normal
off
off
Free Play
on
off
Bonus
off
on
Factory Restore
on
on
Scoop times: When the player win BONUS, the machine will automatically scoop the prizes into the disk.
Scoop times is 4, 4 scoops will scoop once. Scoop times is 8, 4 scoops will scoop twice.
Item
Value
SW2
1
2
3
4
5
6
7
8
BONUS Odds
3%
off
off
5%
on
off
10%
off
on
20%
on
on
Wait Time (second)
to Start Auto Play
Wait all the time
off
off
20
on
off
25
off
on
30
on
on
OFF
OFF
OFF
OFF

Treasure Dome RFID Prototype Manual
11/15/2019
18
Item
Value
Controller
1
2
3
4
5
6
7
8
Stepping Motor
Setting
off
off
off
off
off
off
off
on
Input:
Extend Input:
INPUT
Content
INPUT
Content
INPUT
Content
INPUT
Content
J1-1 (1)
1P Coin
mechanism
J1-9 (9)
2P Coin
mechanism
J7-1 (1)
3P Coin
mechanism
J7-9 (9)
4P Coin
mechanism
J1-2 (2)
1P Button
J1-10 (10)
2P Button
J7-2 (2)
3P Button
J7-10 (10)
4P Button
J1-3 (3)
J1-11 (11)
J7-3 (3)
J7-11 (11)
J1-4 (4)
J1-12 (12)
J7-4 (4)
J7-12 (12)
J1-5 (5)
1P Reset
button
J1-13 (13)
2P Reset
button
J7-5 (5)
3P Reset
button
J7-13 (13)
4P Reset
button
J1-6 (6)
1P Service
button
J1-14 (14)
2P Service
button
J7-6 (6)
3P Service
button
J7-14 (14)
4P Service
button
J1-7 (7)
Tilt alarm R
J1-15 (15)
J7-7 (7)
J7-15 (15)
J1-8 (8)
J1-16 (16)
J7-8 (8)
J7-16 (16)
Output:
OUTPUT
Content
OUTPUT
Content
OUTPUT
Content
J2-1 (1)
J3-9 (9)
1P Coin mechanism GND
J7-1 (17)
1P Coin counter
J2-2 (2)
J3-10 (10)
2P Coin mechanism GND
J7-2 (18)
2P Coin counter
J2-3 (3)
J3-11 (11)
3P Coin mechanism GND
J7-3 (19)
3P Coin counter
J2-4 (4)
J3-12 (12)
4P Coin mechanism GND
J7-4 (20)
4P Coin counter
J2-5 (5)
J3-13 (13)
J7-5 (21)
1P Button light
J2-6 (6)
J3-14 (14)
J7-6 (22)
2P Button light
J2-7 (7)
J3-15 (15)
J7-7 (23)
3P Button light
J2-8 (8)
J3-16 (16)
J7-8 (24)
4P Button light

Treasure Dome RFID Prototype Manual
11/15/2019
19
Input:
Extend Input:
INPUT
Content
INPUT
Content
INPUT
Content
INPUT
Content
J1-1 (1)
1P Claw
depth SW
J1-9 (9)
3P Claw depth
SW
J1-1 (1)
Turntable
zero sensor
J1-9 (9)
J1-2 (2)
1P Scoop
upper sensor
J1-10 (10)
3P Scoop
upper sensor
J1-2 (2)
J1-10 (10)
J1-3 (3)
1P Scoop
lower sensor
J1-11 (11)
3P Scoop
lower sensor
J1-3 (3)
J1-11 (11)
J1-4 (4)
1P BONUS
sensor
J1-12 (12)
3P BONUS
sensor
J1-4 (4)
J1-12 (12)
J1-5 (5)
2P Claw
depth SW
J1-13 (13)
4P Claw depth
SW
J1-5 (5)
J1-13 (13)
J1-6 (6)
2P Scoop
upper sensor
J1-14 (14)
4P Scoop
upper sensor
J1-6 (6)
J1-14 (14)
J1-7 (7)
2P Scoop
lower sensor
J1-15 (15)
4P Scoop
lower sensor
J1-7 (7)
J1-15 (15)
J1-8 (8)
2P BONUS
sensor
J1-16 (16)
4P BONUS
sensor
J1-8 (8)
J1-16 (16)
Output:
Extend Output:
OUTPUT
Content
OUTPUT
Content
OUTPUT
Content
OUTPUT
Content
J2-1 (1)
1P Lift motor
A
J3-1
(9)
3P Lift motor
A
J1-1 (1)
Pusher Motor
A
J1-1 (1)
2P
Light
J2-2 (2)
1P Lift motor
B
J3-2
(10)
3P Lift motor
B
J1-2 (2)
Pusher Motor
B
J1-2 (2)
3P
Light
J2-3 (3)
1P Scoop
motor A
J3-3
(11)
3P Scoop
motor A
J1-3 (3)
1# Scoop light
J1-3 (3)
4P
Light
J2-4 (4)
1P Scoop
motor B
J3-4
(12)
3P Scoop
motor B
J1-4 (4)
2# Scoop light
J1-4 (4)
J2-5 (5)
2P Lift motor
A
J3-5
(13)
4P Lift motor
A
J1-5 (5)
3# Scoop light
J1-5 (5)
J2-6 (6)
2P Lift motor
B
J3-6
(14)
4P Lift motor
B
J1-6 (6)
4# Scoop light
J1-6 (6)
J2-7 (7)
2P Scoop
motor A
J3-7
(15)
4P Scoop
motor A
J1-7 (7)
Stepping
motor EN
J1-7 (7)
J2-8 (8)
2P Scoop
motor B
J3-8
(16)
4P Scoop
motor B
J1-8 (8)
1P Light
J1-8 (8)