Cobra GLOBE 4800 CAN User manual

GLOBE 4800/4900 CAN
MANUALE UTENTE
USERINSTRUCTIONS
MANUEL D’UTILISATION
MANUALDELUSUARIO
06DE2177B.pmd 28/05/2007, 10.331

Dear customer,
Congratulations on your purchase of this product which has been designed and manufactured to the highest
automotive standards utilising the latest technology for total reliability as per the European Community
directives. This manual contains the product installation certificate.
The manual is divided in 9 parts:
Page 13 __________ INTRODUCTION
14 __________ ADDITIONAL PROTECTION
15 __________ BRIEF INSTRUCTIONS
16 __________ BASIC FUNCTIONS
17 __________ ADVANCED FUNCTIONS
18 __________ ALARM MEMORY
19 __________ EMERGENCY OVERRIDE
20 __________ PIN CODE PERSONALISATION
21 __________ TROUBLE SHOOTING
Please read this manual to get the full benefit of the system.
We suggest you to keep this manual with the registration documents of the vehicle. It will be easier
for you to find the information in the event of emergency.
Your dealer will be pleased to clarify any queries you may have with the system or its operation in the
case you did not find any suggestion in chapter 9 (page 21).
06DE2177B.pmd 28/05/2007, 10.3312

13
GB
GLOBE 4800/4900 CAN 1 - INTRODUCTION
1 - INTRODUCTION
The anti-intrusion alarm systems GLOBE 4800/4900 CAN are operated by the original high-security remote control of the vehicle
andinterfacedwiththeoriginalvehicledatalinktroughaCAN(ControllerAreaNetwork)serialinterface.Itgivesahigherfunctional
safety and reliability, reducing also complexity and installation time. The advanced system configuration features allows a quick
system upgrade for any future need.
The total protection of your vehicle is assured by:
1.1 - Personal PIN CODE
Each 4800/4900 has a PIN - CODE that can be used for the emergency override of the system. The PIN - CODE is factory -
setted. We suggest that you replace this number with another commonly used by you (for ex. cellular phone, credit card, etc...).
as it would be easier to remember it.
MOD. ENGINE IMMOBILIZER VOLUMETRIC PROTECTION PERIMETRIC PROTECTION CABLE CUTTING PROTECTION
AK4808 / 4908
AK4818 / 4918
06DE2177B.pmd 28/05/2007, 10.3313

14
GB
2 - ADDITIONAL PROTECTION GLOBE 4800/4900 CAN
2-ADDITIONALPROTECTION
You can increase the protection level of the system with the following additional sensors:
5452: Level monitor module
When the system is armed, this sensor will detect the vehicle being jacked up to tow it away or to steal the wheels.
5462: Hyperfrequency module
When the system is armed a microwave emission from the hyperfrequency module hidden in the passenger compartment will ensure the
volumetric protection of the vehicle. For use on convertible vehicles, the volumetric protection will be stable even with the soft top,
windows or sunroof left open.
2980: Window lift module
When the system is armed, the car electric windows will raise automatically. Can be fitted to any car with electric windows.
06DE2177B.pmd 28/05/2007, 10.3314

15
GB
BRIEF INSTRUCTIONS
GLOBE 4800/4900 CAN 3 - BRIEF INSTRUCTIONS
3-BRIEFINSTRUCTIONS
3.1 - Arming
• Press the button of the radio control to lock the doors (if the
vehicle has central locking).
• The turn indicators will blink .
• The buzzer will issue two beeps (if activated).
• The protections activate after a 40 s timer has elapsed.
• The LED will come on constantly for 40 s then it will flash.
3.2 - Protection
When armed the system will generate an acoustic and visual 30 s
alarmwhenthe bonnet,bootor oneofthedoors is opened.System
with the volumetric sensor will generate the alarm in case of
intrusion. The system remains armed at the end of the cycle.
3.3 - Interrupting an alarm cycle
When sounding, disarm the system (see point 3.4).
3.4 - Disarming
• Press the button on the radio control to open the doors.
• The turn indicators will blink.
• The buzzer will issue one beep (if activated).
• The protections are deactivated immediately .
• The LED will go OFF.
3.5 - Alarm memory
If an alarm has occured the buzzer and the turn indicators will
give four signals instead of one.
See the chapter 6 on page 18.
3.6 - Deactivating the volumetric ultrasonic sensor
The volumetric sensor can be deactivated if you want to leave
the windows open or if someone remains in the passenger
compartment.
1) Press the button on the control panel within 5 s after having
switched off the ignition key.
Keep pressed the push-button until the long flash of the LED.
2) Arm the system pressing the button of the radio control. The
sensor has been inhibited; all other functions remain activated.
Sensors will automatically armed again when the ignition key
will be switched on.
3.7 - Deactivating the volumetric ultrasonic sensor
and boot
With the system armed, press the boot button on the radio
control. The protections of volumetric sensor and boot are
deactivated temporarily.
This function can be useful to open the boot without disarming
the system.
Boot closing reactivate the sensors automatically.
Note: the manufacturer reserves itself the faculty to activate
the function only on predisposed vehicles.
06DE2177B.pmd 28/05/2007, 10.3315

16
GB
4 - BASIC FUNCTIONS GLOBE 4800/4900 CAN
4- BASIC FUNCTIONS
4.1 - Introduction
As the standard working features of this system can be modified by the installer he should have indicated the differences with the
standard factory set-up (black squares) on this manual.
4.2 - Buzzer
Activated Deactivated
If activated the buzzer will sound in synchronism with the
turn indicators to signal the arm and disarm of the system.
4.3 - U.S. frequency selection Low-Level
Activated Deactivated
The system allows setting the internal volumetric protection
sensitivity with two distinct modes, Minimum (Low) or
Maximum(Hi).
4.4 -Doors / bonnet / boot opened signal (See
chapter 6 “ALARM MEMORY”)
Activated Deactivated
Whenarming, thesystem signalsviabuzzer andturn indicators
(5 blinks) if doors, bonnet or boot are open. If they are closed
within 40 s their subsequent opening will be signalled again;
after the 40 s set up delay there is no further trigger until they
are closed and opened again.
4.5 - Arm/disarm blinker
Activated Deactivated
The arming of the system is indicated by 2 blinks of the turn
indicators and disarm by 1 blink. If this function is deactivated,
the turn indicators will only blink during an alarm trigger.
4.6 - Automatic arming
Activated Deactivated
The system will automatically arm 2 min. after the ignition is
switched off and the last door closes, but the doors will not
automatically lock. The system will not auto arm if the ignition
is switched on within 2 min.
4.7 - Immobilizer automatic arming
Activated Deactivated
The engine immobilization will automatically activate 4 min.
afterthe ignitionisswitched off.The LED will flash.The engine
will be immobilized. Close and open the doors with the radio
control to deactivate the system.
06DE2177B.pmd 28/05/2007, 10.3316

17
GB
GLOBE 4800/4900 CAN 5 - ADVANCED FUNCTIONS
4.8 - Immobilizer alarm
Activated Deactivated
An alarm function can be added to the immobilizer automatic
arming. 25 s after the ignition is switched ON the alarm will
trigger.
5 - ADVANCED FUNCTIONS
5.1 - Immobilizer auto re-arm
Activated Deactivated
The immobilizer will automatically rearm if the ignition is not
switchedon within 4 min. after the system has been disarmed.
5.2 - Alarm auto re-arm
Activated Deactivated
When the system has been disarmed by using the radio
control, after a delay the alarm will rearm if the ignition is not
switched on.The timer will reset if the doors are opened and
closed.
06DE2177B.pmd 28/05/2007, 10.3317

18
GB
LED
SIGNAL ALARM DESCRIPTION
1 blink doors, boot have been opened
2 blink ultrasonic volumetric sensor triggered
3 blink bonnet han been opened
4 blink attemps to start (ignition key/hotwire)
6 blink tamper mode
6 - ALARM MEMORY GLOBE 4800/4900 CAN
6-ALARM MEMORY
When disarming, the system signals an alarm with buzzer
and 4 blinks of the turn indicators. Pay attention to LED
signalling, that will be available up until the next re-arming of
the system or until the ignition is switched on.
The different signals indicate the cause of the alarm.
06DE2177B.pmd 28/05/2007, 10.3318

19
GB
GLOBE 4800/4900 CAN 7 - EMERGENCY OVERRIDE
EMERGENCY OVERRIDE
7-EMERGENCYOVERRIDE
The emergency override can happen in two different ways:
- the first way is made turning ON the ignition key and in this way it happenes immediately (transponder detecting);
- the second way happens through the control panel and to proceed with this way follow the instructions listed below.
Press the push button placed on the control panel a number of times corrisponding to the first digit of your PIN CODE.
The LED will blink everytime you press the button, a longer blink will confirm that the right PIN CODE digit has been input. Proceed
in the same way with the 3 further digits.
The system will disarm as soon as the last digit is input.
SIREN
ON
pause
PIN CODE
OK
A ARM
DISARMED
quick
flashing
Push for a number of times
correspondent to the digit of
your PIN code
long
flashing
Enter following
digit of your
PIN CODE
06DE2177B.pmd 28/05/2007, 10.3319

20
GB
PERSONAL PIN CODE
8 - PERSONAL PIN CODE GLOBE 4800/4900 CAN
8- PIN CODE PERSONALISATION
The PIN code should be personalized. As the PIN CODE
enables access to the system, it should not be left in the
unattendedvehicle as it can be used to deactivate the system
or to add new radio controls without authorization. In case
ofloss it is possibletoreplace the PIN CODEwiththe following
procedure, andit must be replaced by a fourdigitcode without
the number ‘0’. Choose a code that you already use for other
purposesto remember more easily (mobile phone,credit card,
etc.). To program the system with your own four digit PIN
CODE, disarm the system then proceed as follows:
• open a door.
• turn the ignition On.
• push the button on the control panel for a number of times
corresponding to the first digit of the old PIN CODE. The
LED will blink everytime you press the button, a longer
blink will confirm that the right PIN CODE digit has been
input.
Proceed in the same way for all others digits. When the
code is recognized the turn indicators will blink once.
• you have 20 s to start again the old PIN CODE input: press
the button on the control panel for a number of times
corresponding to the first digit of the old PIN CODE. The
LED will blink everytime you press the button, a longer
blink will confirm that the right PIN CODE digit has been
input. If this PIN CODE is the same as the previous, the LED
goes on a fixed way for 3 s. When it goes off you can digit
the new PIN CODE.
• press the button on the control panel for a number of times
corresponding to the first digit of the new PIN CODE. The
LED will blink everytime you press the button, a longer
blink will confirm that the right PIN CODE digit has been
input.
• turn the ignition off.
• repeat the new code entry: press the button on the control
panel for a number of times corresponding to the first digit of
the new PIN CODE. The LED will blink everytime you press
the button, a longer blink will confirm that the right PIN
CODE digit has been input. If this PIN CODE is the same as
the previous the system will store it: The storage
confirmation is given by a 3 s blink of the turn indicators
and of the LED.
To exit the program at any time, close the opened door and
the old PIN will not be modified.
8.1 - Loss of the personal PIN CODE
In case of loss of the PIN CODE there is no possibility to enter
in the system and to program it again.
06DE2177B.pmd 28/05/2007, 10.3320

21
GB
GLOBE 4800/4900 CAN 9 - TROUBLE SHOOTING
An alarm has trigg r d for no appar nt r ason
Solution A
When you disarm the system the ED
displays a series of flash codes which
indicates the cause of the trigger (chapter 6)
If ultrasonic volumetric trigger is shown,
check that windows sunroof and air vents
are closed and that no moving objects are
in the vehicle. If the problem persists
contact your dealer.
Solution B
If direct contact trigger (doors, boot and
bonnet opening) is shown, one of the
switches may require adjustement. Contact
your dealer.
Th syst m do s not arm/disarm
Refer to the vehicle owers
manual
The vehicle original remote
control is not working (remote
central door locking not
operated
Contact your dealer.
The vehicle original remote
control is working (central door
locking correctly operated).
9 - TROUBLE SHOOTING
06DE2177B.pmd 28/05/2007, 10.3321