Come.up Winch APE-9 User manual

Hydraulic Hoist
Model: APE-9
OMP-160 140 bar
PN: 681900
Introduction
Feature
Rated line lift: 900 kg / 1,984 lb single line at the top layer of rope
Line speed : 37 mpm / 121 fpm single line at the top layer of rope
Operation pressure: 140 bar with maximum back pressure on return line
of 5 bar
Brake: Multi-disc brake and counterbalance valve providing
full 100% braking
Recommended
wire rope: 8 mm ( 5/16” ) x 68 m ( 223’ )
1,960 N/mm2grade a minimum breaking strength of
44.7 KN required
Hydraulic system: PTO/power take off unit driven pump
Unpacking
．Assembly………………………………………………………………. 1pc
．Counterbalance valve…………………………………………………. 1pc
Read this manual carefully
You should carefully read and understand this manual before operating it.
Careless operation may result in personal injury hazards or property
damage.
Information requesting or parts ordering
Please specify the followings information:
．PN
．Part description
．Serial number
．Replacement part number
．Quantity for each part
Installation
Before using the winch, make sure all components have no corrosion or
damaged; the environment should be clear and dry.
Mounting
．Hoist shall be mounted on a flat and hard
surface.
．Hoist should be mounted as closed to center
and as perpendicular as possible to the
direction of the line pull.
．Wire rope shall be wound in an under-wound
orientation only.
．Four (4) M12 , 8.8 grade w/76 N-m torque
setting (maximum) high tensile steel bolts must be used in order to sustain
the loads imposed on the winch mounting.
Hydraulic System
( Powered by PTO / power take off unit driven pump )
The installation of the counterbalance valve supplied is required for 100% braking

Warning
．The rated line pull and speed are based on the first layer of rope on the drum.
．The rope winding on the drum shall remain 5 wraps from the drum.
Warranty
Comeup Industries Inc. takes the responsibility for all parts and components
to be free from defects in materials and workmanship appearing under
normal use for one year from the date of purchase.
Parts List
Item No. Description Part No. Qty
1 Hydraulic motor kit for OMP-160 882879 1
2 Motor fix plate kit 882885 1
3 Multi-disc brake kit 882886 1
4 Drum bushing 882931 2
5 Metallic gasket 882932 2
6 Drum kit 882887 1
7 Thimble 882933 1
8 1st pinion kit 882891 1
9 1st ring gear kit 882892 1
10 Gearbox fix plate kit 882893 1
11 Tie bar kit 882894 1
12 Base plate kit 882895 2
Assembly
2019/11/01 Ver:02