Comelit 2738W User manual

EN
TECHNICAL
MANUAL
Passion.Technology.Design.
Door-entry phone
Art. 2738W

Description....................................................................................... 3
Technical specifications ................................................................. 4
Installation........................................................................................ 5
Connections..................................................................................... 6
Connection to the video entry system riser...........................................6
Branched connection to the video entry system riser from the
internal video unit.....................................................................................6
Programming ................................................................................... 7
System performance and layouts .................................................. 7
Table of contents
Warning
2

Description
Article 2738W is a door-entry phone complete with 1 key button, 1 P1 button and a 3-position ringtone / Privacy service
selector. Can be used in “Building Kit” systems (exclusively 2-wire).
1. Loudspeaker
2. Audio hook
Do not press and hold the audio hook
while the handset is lifted
3. 3-position ringtone / Privacy selector:
High position: Maximum ringtone volume
Middle position: Medium ringtone volume
Low position: Privacy activation (Privacy service means
exclusion of the call ringtone from the external unit and
switchboard)
4. Red indicator signaling: Privacy service active
5. P1 button for switchboard call / Generic actuator
6. Key button
7. Terminal block M1:
CFP CFP floor door call input
LL BUS line connection
8. DIP-switch for setting user code (See “DIP-switch
programming table”).
9. Bell / Privacy selector
10. JP1 jumper for selecting the Generic actuator /
Switchboard call function of button P1
CSwitchboard
AGeneric Actuator
11. Handset connector
1.
5.
4.
6.
2.
3.
3

Technical specifications
MAIN SPECIFICATIONS
Audio system Yes
Audio/video system Yes
Wall-mounted Yes
Desk base-mounted Yes
Product colour White
Total buttons 2
LED signaling No
FUNCTIONS
Actuator control function Ye s
Switchboard call function Yes
Privacy function Yes
Floor door call function Yes
Electronic bell Yes
SETTINGS
Loudspeaker volume control Yes
Microphone volume control No
Ringtone volume control Ye s
GENERAL INFOI
Product height (mm) 190
Product width (mm) 103
Product depth (mm) 30
TECHNICAL SPECIFICATIONS
Power supply voltage 22÷35 Vdc
Power consumption stand-by (mA) 0,5÷0,710 Vdc
In called absorption (mA) 25÷30 mA
In communication absorption (mA) 23÷30 mA
Microphone Ø 9,6 x 6,9 mm
Loudspeaker Ø 0,50 mm ; Max Imput Power 0,5W
IP Rating 30
Operating temperature (°C) -5÷40
Product weight (g) 0,257 Kg
Clamps L,L,CFP,CFP
4

2
1
3
3
2
1
2
3
3
2
1
3D3C3B
S1
SW1
JP1
CFP
CFP
L
L
S1
SW1
JP1
CFP
CFP
L
L
max 7 cm
1
1CLACK!
2
CLACK!
1
1
1
1
2
654
2
2
1
cm 160 cm 130
1
2
2
3
3A21
mm 190
mm 105
7
Installation
5

Connections
2738W
1214/2C
VIDEO ENTRY
SYSTEM RISER
VIDEO ENTRY
SYSTEM RISER
P
F
C
LL
P
F
C
FLOOR DOOR CALL
LM
LM
OUT
L
IN
L
IN
L
OUT
L
20 m MAX - Use shielded cable for the connection and do not route the cables in the vicinity of heavy inductive loads
or power supply cables (230V/400V).
Where multiple door-entry phones or monitor backplates have the same user code, connect the CFP button on oneonly;
all the devices will ring simultaneously..
Connection to the video entry system riser
Branched connection to the video entry system riser from the internal video unit
L
OUT
L
IN
L
IN
L
OUT
1214/2C
1214/2C
1209 / 1210 /4888C
LM
LM
C
F
P
LL
C
F
P
12
6700W
6701W
6701B
L L
C
F
P
C
F
P
2738W
L L
C
F
P
C
F
P
2738W
LM
LM
OUT
L
IN
L
IN
L
OUT
L
123456
6721W
6721W
20 m MAX - Use shielded cable for the connection and do not route the cables in the vicinity of heavy inductive loads
or power supply cables (230V/400V).
Where multiple door-entry phones or monitor backplates have the same user code, connect the CFP button on one
only; all the devices will ring simultaneously..
6

Programming
• Each door-entry phone in the system is identified by means of its own code. This code must be set using the Dip switch on
the phone card.
• The user code must be set according to the corresponding information provided in the programming table.
• Coding can take place at any time, even without a power supply.
System performance and layouts
For further information of system performance and to view installation layouts, click on the type of system that best meets your
needs:
• Audio/video kit for the creation of audio-video systems for individual residences.
• Building Kit audio/video system for the creation of audio-video systems for small apartment blocks.
• SBTOP audio/video system for the creation of audio-video systems for residential complexes.
• SB2 audio system for the creation of audio systems for residential complexes.
7

www.comelitgroup.com
Via Don Arrigoni, 5 - 24020 Rovetta (BG) - Italy
1st edition 07/2017
code. 2G40001933
CERTIFIED MANAGEMENT SYSTEMS