Comelit Simplebus Color 1224A User manual

EN
TECHNICAL
MANUAL
Switching device
Art. 1224A Passion.Technology.Design.
Ar 1224A
t.
LM LM LS LS LP LP ~+~-
MIN MAX
ON
12345678
ON
12345678

Warning
Intended use
This Comelit product was designed for use in the creation of audio and video communication systems in residential,
commercial or industrial settings and in public buildings or buildings used by the public.
Installation
All activities connected to the installation of Comelit products must be carried out by qualified technical personnel, with
careful observation of the indications provided in the Manuals / Instruction sheets supplied with those products.
Wires
Cut o the power supply before carrying out any maintenance procedures.
Use wires with a cross-section suited to the distances involved, observing the instructions provided in the system
manual.
We advise against running the system wires through the same duct as the power cables (230V or higher).
Safe usage
To ensure Comelit products are used safely:
• carefully observe the indications provided in the Manuals / Instruction sheets
• make sure the system created using Comelit products has not been tampered with / damaged.
Maintenance
Comelit products do not require maintenance aside from routine cleaning, which should be carried out in accordance
with the indications provided in the Manuals / Instruction sheets.
Any repair work must be carried out
• for the products themselves, exclusively by Comelit Group S.p.A.,
• for systems, by qualified technical personnel.
Disclaimer
Comelit Group S.p.A. does not assume any responsibility for
• any usage other than the intended use
• non-observance of the indications and warnings contained in this Manual / Instruction sheet.
Comelit Group S.p.A. nonetheless reserves the right to change the information provided in this Manual / Instruction
sheet at any time and without prior notice.
2

Description
1.
Ar 1224A
t.
LM LM LS LS LP LP ~+~-
MIN MAX
ON
12345678
ON
12345678
2.
1. MIN and MAX microswitches define respectively the lowest and highest user codes which can be connected to the riser.
(see Addressing table)
2. Terminal block MR1
LM LM riser bus line output
LS LS secondary bus line
LP LP main bus line
~ + power supply positive
~ - power supply negative
Switching device for audio or audio-video systems with 2 or more doors in SB1 systems and SBTOP audio/video systems.
Complete with 2 dip-switches with 8 positions for setting the user range of the riser. 12V AC and 22V DC power supply.
Technical features
MAIN FEATURES
Product height (inch) 3.35
Product width (inch) 2.36
Product depth (inch) 1.38
Operating temperature (°F) -13 ÷ 104
RH max operating humidity (%) 25 ÷ 75
DIN rail mounted Ye s
DIN modules (no.) 4
Maximum current absorption (mA) 40
GENERAL DATA
Type of finish Plastic
Product colour White
COMPATIBILITY
Simplebus Top audio/video system Yes
Simplebus 1 audio system Yes
Where TOP functions are not required
3

1224A
L
⁓ ⁓
+
-M
L
M
L
S
L
S
L
P
L
P
ON ON
VIDEO ENTRY SYSTEM
RISER
SECONDARY
BUS LINE
POWER SUPPLY
MAIN BUS LINE
Connection
4

MIN MAX
RANGE 1÷10
MIN MAX
RANGE 11÷20
MIN
RANGE 1÷20
MAX
STAIRCASE A STAIRCASE B
MAIN DOOR
staircase
Operating mode
Example coding of switching device Art. 1224A (staircase A 1 to 10 , staircase B 11 to 20)
Each switching module is equipped with a pair of DIP switches with 8 selectors. The two Dip switches define the MIN and MAX
range of codes that can be recognised by the switching device.
CAUTION! Separate switching devices must manage code ranges which are not overlapping.
System performance and layouts
For further information of system performance and to view installation layouts, click on the system type that best meets your
requirements:
• SBTOP audio/video system for the creation of audio-video systems for residential complexes.
• SB1 audio system for the creation of audio systems for residential complexes.
5

www.comelitgroup.com
Via Don Arrigoni, 5 - 24020 Rovetta (BG) - Italy
1ª edizione 06/2018 cod. 2G40002081
CERTIFIED MANAGEMENT SYSTEMS