Comica Vimo S-UC User manual

User Manual
2.4G Dual-channel Mini Wireless Microphone
Vimo S-UC

Foreword
Features
Thanks for purchasing Comica 2.4G Dual-channel Mini Wireless Microphone Vimo S-UC.
● Mini and Lightweight, Unique Magnetic Integrated Microphone
● 48kHz/24bit Record, Broadcasting-level Sound Quality
● USB Digital Output, Universal for Computers and Phones
● Stepless Volume Adjustment, One-key Muting and Denoise
● USB-C Charging/Monitoring Port, Support Pass-through Phone Charging
● Support Monitoring with Zero-latency and Mono/Stereo Switch
● Rechargeable Storage Case for Charging, Storing and Power Monitoring
● Duration Up to 15 Hours, Support Using While Charging
● Low Latency < 20ms, Working Range Up to 200m(Open Area)
1

Notice
Due to 2.4G wireless characteristics, please keep face to face when use it, and don’t turn your back to the
receiver, otherwise it is easy to generate breakpoints, which is a normal phenomenon.
Due to the characteristics of lithium batteries, the transmitter's charging indicator will show an inaccurate
battery level when the charging starts, and the actual power may be lower than the indicated power. If the
transmitter runs out of power, it will take more than two hours to get fully charged.
Please pay attention that it can not realize STEREO function when in single-channel mode.
Please do not expose the product to rain or moisture, and avoid having water or other liquids spilled on it.
Please do not use or store the product near any heat sources such as radiators, stoves, or other
heat-producing appliances.
This product is a high-precision product, please prevent it from dropping or colliding.
2

Packing List
①Transmitter(TX)
②Receiver(RX)
③Charging Case
④Wind Mu
⑤2 in 1 Charging/Monitoring Adapter Cable
⑥USB C-USB A Charging Cable
⑦User Manual
⑧Warranty Card
UserManual
Versatile 2.4G Wireless Mini USB Microphone
VimoS-UC
①x2 ④x2 ⑤ ⑥ ⑧⑦ ② ③
3

Components and Instruction
①Internal Mic
②Working Status Indicator:
Blink blue slowly when unpaired; Blink rapidly when pairing;
Show blue when paired; Show green when denoise is on; Show red when muting.
③Belt Clip
④Mute/Denoise/Pairing Switch Button:
Short press for muting; Long press for pairing when unpaired; Long press for denoise when paired.
⑤Charging Contacts
Transmitter (TX):
①
②
③
④⑤
4

①Charging/Monitoring Port
②USB-C Plug
③Transmitter Volume Control Knob:
Adjust the volume of transmitter 1/2 synchronously. Turn counterclockwise to increase the volume,
and turn clockwise to reduce the volume.
④Transmitter 1/2 Pairing Indicator:
Blink blue when unpaired; Show blue when paired.
⑤Mode Indicator:
Show blue when in mono mode; Indicator is o when in stereo mode.
⑥Mono/Stereo Switch Button:
Short press to switch Mono/Stereo mode.
Receiver (RX):
④
③
⑤
②
①
⑥
5

Charging Case:
①USB-C Port
②Battery Level Indicator Button:
Short press to show the battery level of charging case and transmitters.
③Charging Case Battery Level: 0-100
④Battery Level Indicator of Transmitters:
The left indicators show the battery level of the transmitter placed in the charger well 1;
The right indicators show the battery level of the transmitter placed in the charger well 2.
There are four power indicator lights, one of which represents 25% of the power.
⑤Charger Well 1
⑥Charger Well 2
⑦USB-C Charging Port
⑧Restoration Hole
①②
⑤
⑥
④
④
③
⑦
⑧
6

Installation and Usage
Pairing (All have been paired at the factory. If you need to re-pair, please follow the steps below.)
Long press the pairing button on the TX to pair. The indicator lights on the TX and the RX will show blue when
the pairing is successful.
7
7

Usage
1. Remove the transmitters and the receiver from the charging case
Remove from the left side
8
8

3. Attach the receiver to the USB-C devices (phones and computers)
Install the transmitter on the collar so that the internal mic points to the sound source
① ②
2. Install the transmitter on the collar
9
9

Method One
Connect USB-C headphones to monitor or connect the power bank/DC power using the USB C-USB A
charging cable to charge the mobile phone.
4. Monitoring/Charging
10
10

Method Two
Connect 3.5mm headphones through the 2 in1 charging/monitoring adapter cable for monitoring and connect
the power bank/DC power to charge the mobile phone at the same time.
11
11

Specification Wireless Type
Antenna
Sampling Rate
Bit Depth
Transmitting Power
Sensitivity
Polar Pattern
Frequency Response
S/N
Equivalent Noise
Maximum SPL
Dynamic Range
Sound Delay
Battery
Charging Time
Standby Time
Net Weight
Dimension
Operating Temperature
Storage Temperature
2.4GHz
Built-in Antenna
48kHz
24bits
10dBm
-32dB ±2dB
Omnidirectional
80Hz~20kHz
70dB
24dBA
110dB
86dB
<20ms
TX: Built-in Li-ion Battery 95mAh 3.8V
Charging Case: Built-in Li-ion Battery 800mAh 3.8V
TX: 2 Hours; Charging Case: 2 Hours
TX: 5 Hours; Charging Case: 2 times for two
transmitters and one receiver charged simultaneously
TX: 10g
RX: 12g
Charging Case: 53g
TX: 16x16x50mm
RX: 12x26.5x63mm
Charging Case: 29x58.5x63mm
0℃~ 50℃
-20℃~ 60℃
12

产品使用说明书
2.4G双通道迷你无线麦克风
Vimo S-UC

前言
产品主要功能
注意事项
感谢您购买科唛Vimo S-UC
● 独特磁吸集成化设计，轻巧迷你
●48kHz/24bit录音，超CD级音质
● USB直插式数字输出，广泛兼容手机、电脑等设备
● 无级音量可调，支持一键静音及降噪
●USB-C充电/监听接口，支持手机直通充电
●支持实时监听，单声道/立体声切换
●多功能磁吸充电盒，总续航高达15小时
●低音频延迟＜20ms，无线传输距离高达200m
由于2.4G无线特性，使用时尽量保持面对面，避免背对的情况，否则容易产生断点，属正常现象
由于锂电池的特性，发射器充电开始时存在虚电现象，实际电量可能会低于显示电量。若电量完全耗尽，
需要充电两小时以上才能充满
单通道模式下，立体声（STEREO）功能无法实现
请将该产品放置在干燥环境中保存；请勿在雨中或潮湿的环境中使用该设备，以免发生短路
请勿将产品放置在散热器、烤箱、冰箱、空调等热源或干扰源附近使用
本产品属于高精密仪器类产品，请勿掉落、碰撞或撞击产品 1

包装清单
①发射器(TX)
②接收器(RX)
③充电盒
④防风毛
⑤一分二音频/充电转接线
⑥USB C-USB A充电线
⑦说明书
⑧保修卡
UserManual
Versatile 2.4G Wireless Mini USB Microphone
VimoS-UC
①x2 ④x2 ⑤ ⑥ ⑧⑦ ② ③
2

部件介绍及说明
①内置咪头
②工作状态指示灯：
未配对时蓝灯慢闪；配对时指示灯快闪；配对成功时蓝灯长亮；开启降噪时绿灯长亮；MIC静音时红灯长亮。
③背夹
④静音/降噪/配对切换按键：
短按静音；未配对时长按配对；已配对时长按降噪。
⑤充电触点
发射器(TX):
①
②
③
④⑤
3

①充电/监听接口
②USB-C插头
③发射器音量调节旋钮：
同时调节发射器1和2的音量，逆时针调节增大音量，顺时针调节减小音量。
④发射器1/2配对指示灯：
未配对时蓝灯闪烁；配对成功蓝灯长亮。
⑤模式指示灯：
单声道模式下，蓝灯长亮；立体声模式下，指示灯不亮。
⑥单声道/立体声切换按键：
短按切换单声道/立体声。
接收器(RX):
④
③
⑤
②
①
⑥
4