CommScope Cell-Max CMAX-O-TCPUSEWI53 User manual

M0153ADA_InstInstr_CM AX-O-TCPUSEWi53
Technical Support:
http://w ww .com m scope.com /w is u pp ort
INSTALLATION INSTRUCTION FOR
CMAX-O-TCPUSEWI53
Installation Mode1:
Installation Steps
1) Drill a hole in the ceiling with the diameter shown above.
2) Remove the retaining nut from the back of the antenna.
3) Lead the pigtail through theholein theceiling.
4) Mount the antenna on the ceiling by reinstalling the retaining nut removed before.
Note:
Cable min.bending radius:40mm

M0153ADA_InstInstr_CM AX-O-TCPUSEWi53
Technical Support:
http://w ww .com m scope.com /w is u pp or
Installation Mode 2:
Installation Steps
1) Drill 3 holes in the ceiling tile with the diameter sho wn above.
2) Insert the plastic plug into theholes.
3) Remove the retaining nut from the back of the antenna.
4) Mountthe antennaon theceiling by tappingscrews and thematched plastic
plug stuck in theceiling.
5) Cover the tapping screw with alid.
Note:
Cable min.bending radius:40mm
© Copyr ig ht 2021 CommScope, Inc.
All r ig hts r eserved.
All information contained in this m anual has been revised thor oug hly. Yet CommScope accepts no li ability for any om issions or
faults.
CommScope reser ves the right to chang e all hardware and software characteristics without notice.
Names of products m entioned herein are used for identification purposes only and m ay be trademarks and / or registered
tr adem ar ks of their respective companies.
No parts of this publication may be reproduced, stored in a retr ieval system , transmitted in any form or by any means, electronical,
mechanical photocopying, recor ding or otherwise, without prior w ritten permission of the publi sher .
CommScope, 14-January-2021