Connects2 43uft03 User manual

43uft03 Infodapter
for Fiat vehicles
APPLICATION
FEATURES
Fiat Ducato (8 Series) 2021 - UP
• Retains steering wheel control & phone button functionality
• Retains vehicle settings and generates setting menus
• Provides outputs for Park Brake, Reverse Gear and Speed Pulse
The information provided in this document is subject to change without notice due to manufacturer changes and/or improvements to the product/s. This
instruction manual is based on documented data and research. The manufacturer of this product cannot be held responsible for any changes made to the
vehicle by the manufacturer or damages that may occur through the installation of this product in accordance with the steps outlined herein.
Note: Application data is subject to change at any time
DISCLAIMER
.
.

l
IN ISO CONNECTOR
Purple Right Rear Speaker +
Purple/Black Right Rear Speaker -
Green Left Rear Speaker +
Green/Black Left Rear Speaker -
Grey Right Front Speaker +
Grey/Black Right Front Speaker -
White Left Front Speaker +
White/Black Left Front Speaker -
ADDITIONAL CONNECTIONS
Pink Speed Pulse
Green Park Brake
Purple/White Reverse Gear
WIRING KEY
Yellow Permanent 12V
Black Ground
Red Ignition 12V
Orange Illumination
Blue Antenna Remote
PRODUCT INFORMATION
The interface provided helps retain steering wheel control presets and phone button functionality, as
well as retaining vital features and functions which include OEM vehicle settings. The lead features
plug-and-play connectors for an easier installation process.
Yellow RCA (Male) Infodapter Video
Yellow RCA (Female) Aftermarket Camera Input
INTERFACE CONNECTIONS
1 2 3 4
DIP Switch 1 - ‘ON’ for Pioneer, ‘OFF’ for other brand head unitsDIP Switch 1 - ‘ON’ for Pioneer, ‘OFF’ for other brand head units
DIP Switch 2 - ‘ON’ for PAL reversing camera, ‘OFF’ for NTSC reversing camera (Default is ‘OFF’/NTSC)DIP Switch 2 - ‘ON’ for PAL reversing camera, ‘OFF’ for NTSC reversing camera (Default is ‘OFF’/NTSC)
DIP Switch 3 - Change from ‘OFF’ to ‘ON’ and back to reset screen settings to factory defaults.DIP Switch 3 - Change from ‘OFF’ to ‘ON’ and back to reset screen settings to factory defaults.
Note: During this procedure, the screen background will change to red and no settings adjustments can be made.Note: During this procedure, the screen background will change to red and no settings adjustments can be made.
DIP Switch 4 - Not UsedDIP Switch 4 - Not Used
12 3 45
1
4
2
3
5
Reverse Camera Extension Harness InputReverse Camera Extension Harness Input
Power Harness InputPower Harness Input
Head Unit Connection (Patch) Lead InputHead Unit Connection (Patch) Lead Input
Not usedNot used

OK LIM
FRONT
BACK
STEERING WHEEL CONTROLS
The following diagram, though based on careful research, is an example only. Individual steering wheel control congurations may differ.
EXAMPLE STEERING WHEEL CONTROL DIAGRAM
The Infodapter will retain several of the vehicle’s original steering wheel control functions including
moving up and down between tracks, adjusting the volume and picking up or hanging up calls.
In addition to this functionality, the vehicle’s steering wheel controls are also used to enter, exit and
navigate the Infodapter menus. An example conguration can be seen below:
1. Track Up
2. Track Down
3. Source *
4. Volume Up
5. Volume Down
6. Mute
7. Pick Up
8. Speech (Long Press: Enter Infodapter Menu)
9. Hang Up
Normal Functionality
1. Navigate options up
2. Navigate options down
8. Short Press: Select Menu Item
Long Press: Exit Infodapter Menu
Navigating the Infodapter Menus
1
2
3
4
5
6
7
8
9
Please note: steering wheel controls dealing with
cruise control on the front are unaffected.
*In the case that the vehicle does not feature phone
buttons, the ‘Source’ button will act as Infodapter
enter/exit button.
DIP Switch 1 - ‘ON’ for Pioneer, ‘OFF’ for other brand head unitsDIP Switch 1 - ‘ON’ for Pioneer, ‘OFF’ for other brand head units
DIP Switch 2 - ‘ON’ for PAL reversing camera, ‘OFF’ for NTSC reversing camera (Default is ‘OFF’/NTSC)DIP Switch 2 - ‘ON’ for PAL reversing camera, ‘OFF’ for NTSC reversing camera (Default is ‘OFF’/NTSC)
DIP Switch 3 - Change from ‘OFF’ to ‘ON’ and back to reset screen settings to factory defaults.DIP Switch 3 - Change from ‘OFF’ to ‘ON’ and back to reset screen settings to factory defaults.
Note: During this procedure, the screen background will change to red and no settings adjustments can be made.Note: During this procedure, the screen background will change to red and no settings adjustments can be made.
DIP Switch 4 - Not UsedDIP Switch 4 - Not Used
Reverse Camera Extension Harness InputReverse Camera Extension Harness Input
Power Harness InputPower Harness Input
Head Unit Connection (Patch) Lead InputHead Unit Connection (Patch) Lead Input
Not usedNot used

WIRING DIAGRAM
ISO Connector
Connect to aftermarket stereo
12-Way/32-Way Connector
Connect to relevant connectors from vehicle
Stereo Connection (Patch) Lead Connector [12 Pin]
Connect to Interface Box
Note: Must be connected first, before power
connection is made to the interface
Main Wiring Loom Connector [14 Pin]
Connect to Interface Box
Flying Wires
Pink - Speed Pulse
Green - Park Brake
Purple/White - Reverse Gear
Male Yellow RCA Connector
Connect to aftermarket radio
camera input
Aftermarket Camera RCA Connector
Connect camera input to female phono
connector (optional)
Fakra Antenna Connection
Connect to OEM Antenna connector from vehicle
FM/Blue Phantom Power Connections
Connect to aftermarket stereo

9. Attach the antenna adapter in between the vehicles pre-existing connector as well as the rear of the
aftermarket head unit.
NOTE: If vehicles which feature an amplied aerial, the blue wire will be needed for purposes of phantom power.
INSTALLATION GUIDE - WIRING
Before installing the interface, the factory stereo must be removed and disconnected. To do this, please consult the vehicle
owner’s manual/handbook or contact a tting professional.
For universal patch leads, prepare the wiring loops in accordance with the instruction manual supplied before installation.
See Wiring Diagram on Pg.4 for more information
2. Connect the opposite end of the stereo connection (patch) lead to the steering wheel control input on
the back of the aftermarket stereo
NOTE: This may be a 3.5mm jack connector or a wired input depending on the brand of aftermarket stereo being tted. Please consult the
aftermarket stereo installation manual for further information on where to make the connection.
IMPORTANT: THIS STEP MUST BE COMPLETED BEFORE CONNECTING POWER TO THE INTERFACE.
FAILURE TO DO SO MAY RESULT IN A LACK OF FUNCTIONALITY AND THE NEED TO REINSTALL THE PRODUCT
!
3. Connect the 14 Pin connector from the supplied wiring loom to the interface box.
1. Connect the 12 Pin connector from the stereo connection (patch) lead to the interface box
11. Test stereo and steering wheel control functionality for correct operation before reassembling the
vehicle dashboard. If steering wheel control functions are unresponsive, please uninstall the interface and
wiring and reinstall carefully in accordance with the above steps.
10. Connect the 12 & 32-way connectors on the supplied harness to the relevant connectors from the
vehicle.
8. To connect an aftermarket reversing camera, connect the female yellow RCA from the camera extension
harness to the male yellow RCA of the camera (optional).
Note: Ensure that the ‘Camera Connected’ option in the Preferences menu is set to ‘Yes’ for the camera to function correctly.
6. Connect any additional outputs from the main wiring harness to the head unit.
For more details surrounding the flying wires, go to Pg.2 and see ‘Additional Connections’.
4. Connect the power/speaker ISO connector to the power/speaker ISO connector at the rear of
aftermarket stereo.
Note: For aftermarket stereos which do not have an ISO connector, please see ‘Wiring Key’ on Pg.2 for information on which wires to connect.
Some interfaces may also have additional ‘flying’ wires which can be connected to the vehicle to support various features i.e. parking brake
trigger, reverse gear and speed pulse. Details of these can be found under ‘Additional Connections’.
5. Connect 4 Pin camera extension harness to the interface box.
7. Connect the male yellow RCA to the reverse camera input of the aftermarket head unit

INFODAPTER MENU
Conguration Menu
Vehicle Settings
Infodapter Settings
Language
Version
< Back
Once the CTKFT03 has been installed into the vehicle successfully, simply hold the ‘Speech’ button (Fig.8)
on the steering wheel to access the ‘Conguration Menu’.
Note: In the case that the vehicle does not feature phone buttons, the ‘Source’ button will act as Infodapter
enter/exit button.
The Infodapters ‘Conguration menu’ showcases a series
of options and settings that can be altered to tailor the
users experience. To navigate these options, use the
‘Track Up’ & ‘Track Down’ buttons (Fig.1 & 2).
VEHICLE SETTINGS
The Infodapter interface retains the ability to adjust
vehicle settings that were present when the original head
unit was installed.
The ‘Vehicle Settings’ menu contains a variety of
original vehicle settings. Vehicle setup options that were
available with through the original head unit will now be
available through the aftermarket head unit.
See the vehicle handbook for more information regarding
these features.
INFODAPTER SETTINGS
The ‘Infodapter Settings’ menu contains parameters that
can be selected to enhance/adapt the Infodapters layout
and functionality.
Vehicle Settings
Display >
Clock >
Doors & Locks >
Lights >
Safety & Driving Assistance >
Cong Type 0
< Back
INSTALLER MENU
This menu displays a variety of options which can add/remove
settings within the Infodapter menus.
Each option can be set to either ‘OFF’, ‘ON’ or ‘AUTO’ to display
it, for example, if the ‘Language’ options is changed to ‘OFF’, the
options will dissapear from the main Conguration Menu.
This list includes following attributes which can be controlled
by the interface:
- Language - Version - Distance Units - Clock
- Temperature Units - Consumption Units - Speed Units - Follow Me
- Auto Door Unlock on Exit - Flash Lights with lock - Courtesy Lights - Auto Door Locks
- Daytime Running Lights - Cornering Lights - Ambient Lighting - Greeting Lights
- Park Sense Volume Level - High Beam Control - Park Sense - Rain Sensor
- Lane Sense Warning - Lane Sense Strength - Tyre Pressure Units - Cong Type
- Trafc Sign Recognition - Trafc Sign Warning - Vehicle Off Options - Blindspot Assist.
- Headlight Sensor Sensitivity - Auton./Forward Collision Warning - Auton./Forward Collision Sensitivity
Note: although care has been taken to ensure the accuracy of this menu structure at the time of printing this document, sudden changes
in software by the manufacturer, or incompatibilities with the interface cannot be accounted for. Do not consider this list to be exhaustive.
Installer Menu
< Back
Language On
Version On
Distance Units On
Consumption Units On
Temperature Units On

INFODAPTER MENU
SCREEN SIZE/POSITION
Allows the user to setup the Infodapter display screen to
the exact size of the aftermarket head unit being tted.
PICTURE SETTINGS
Allows the user to adjust the Brightness, Contrast and
Saturation levels of the Infodapter menus/parking
graphics.
Infodapter Settings
Screen Size & Position
Picture Settings
Preferences
Installer Menu
< Back
PREFERENCES
• Park Assist Version
Select according to the colour conguration of the park assist
tted to the vehicle.
• Camera Connected
Select ‘Yes’ if an optional camera is connected
• Park Brake Source
Set Park Brake output to activate when park brake is on (Brake), when speed is less than 3km/h (Speed) or
to remain on at all times (Always On)
• Reverse Priority
Select which image (Camera or Park Assist) will be shown by default when reversing.
(Note: this option is only available when Camera Connected is set to ‘Yes’)
• Restore Factory Settings
Select Yes to return all Infodapter settings to factory defaults
LANGUAGE & VERSION
The latter of the settings menu gives the user a selection
of languages - English/French/German/etc. - as well as the
ability of viewing the current version history.
Infodapter Settings
Park Assist Version 0
Camera Connected Yes
Park Brake Source Speed
Reverse Priority Park Assist
Restore factory settings >
< Back
Language
◉English ◎Deutsch
◎Nederlands ◎Italiano
◎Français ◎Español
◎Swedish ◎Brasileiro
◎Greek ◎Hungarian
◎Polski ◎Português
◎Russian ◎Türkçe

11
NOTES