Connects2 adaptiv mini ADVM-BM1 User manual

1
WWW.ADAPTIV-MULTIMEDIA.COM
ADVM-BM1_IG_en-GB_V2

BMW NBT PLATFORM
2
ABOUT
Adaptiv Mini
Adaptiv Mini allows HDMI & Camera input to the
OEM screen.
This plug and play Mini interface adds HDMI to connect your Apple or Android de-
vice, allowing you to mirror your smartphone display on the vehicle’s original screen.
Inputs for front and rear aftermarket cameras also come as standard with the Mini.
Application
1 Series (F20/21)* 2011>
3 Series (F30)* 2012>
4 Series (F32)* 2014>
5 Series (F10)* 2011>
X3 (F25)* 2010>
Mini (F55/F56)** 2014>
*For BMW vehicles with NBT 6.5”/8.4”/10.25” Control Display.
**For BMW vehicles with CIC 6.5” Control Display
Vehicles with OEM AUX Input Only. For LVDS HSD+2 Pin Connector Only.
Kit Includes
Adaptiv Interface
Vehicle Harness
Prior to installation
Read the manual prior to installation. Technical knowledge is necessary for installa-
tion. The place of installation must be free of moisture and away from heat sources.
Connects2 cannot be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any
technical issues. With this in mind, when contacting Connects2, try to provide as
much Information as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com

3
WWW.ADAPTIV-MULTIMEDIA.COM
CONNECTION DIAGRAM
DIP SWITCH SETTINGS
DIP 1
If the vehicle has OEM
reverse camera
( ON: YES OFF: NO )
DIP 3
If the vehicle has after-
market reverse camera (
ON: YES OFF: NO )
DIP 2
If the vehicle has after-
market front camera (
ON: YES OFF:NO )
DIP 4 DIP 5
6.5”
Screen ON OFF
8.8” &
10.2” OFF OFF
Screen

BMW NBT PLATFORM
4
USER GUIDE
HDMI Access
Select AUX In from the OEM Source Menu. Hold MENU for 2 seconds to switch between
OEM screen and Adaptiv Mini HDMI screen. Hold MENU for 2 seconds to exit HDMI.
Rear and Front Camera Access
From either HDMI mode or OEM mode
1. Select reverse gear for reverse camera
2. Deselect reverse gear - will go to after market front camera ( if DIP 2 ON )
Hold BACK for 2 seconds to cancel front camera or drive over 10 MPH
Front Camera Access
Press and hold BACK to enter the front camera screen ( if DIP 2 is ON ). Hold BACK
for 2 seconds to exit front camera.
View Version Number
Hold MENU Button for 8 seconds to enter rmware information screen
Hold BACK for 2 seconds to disable the video in motion warning message
Video In Motion Warning - 10 MPH
Button Cong
Menu Button
Back Button
HDMI Access
While reversing and PDC on, long press the MENU button to switch below three modes.
1. Full display
2. 3/4 display
3. The PDC screen moves to the right