Converters.TV 661 User manual

HDMI to PC/HD Converter
ID# 661
Operation Manual

Introduction
HDMI to PC/HD Converter converts Digital HDMI input to Analog PC/RGB or
SD/HD output. It enables you to connect a HDMI source to an analog PC
monitor projector or TV. Its high bandwidth capability supports a wide range
of PC and HDTV resolutions. Connect to your monitor via VGA or Component
input for display. Ideal for Business and Private applications.
The unit is extremely small and easy to set up. Connect the HDMI input port to
the HDMI output port of your device such as a Blu Ray player or set top box.
Then connect the output port to the PC/YPbPr input of your device such as
an analog PC monitor projector or TV.
The unit has a switch which lets you select the correct output. Set the switch
to RGB when your HDMI source device is a PC graphics card or other digital
RGB source signal. Set the switch to YPbPr when your HDMI source device is a
Blu Ray player set-top box or any other high definition digital video source.
Features
 Supports HDMI input and Analog PC or SD/HD output.
 Supports output selection between YPbPr and RGB.
 Supports input/output resolution as below:
PC: 640x480= VGA59 VGA60 VGA72 VGA75 VGA85
800x600= SVGA56 SVGA60 SVGA72 SVGA75 SVGA85
1024x768= XGA60 XGA70 XGA75 XGA85
1152x864= MAC70 MAC75 MAC85
1280x800= WXGA60
1280x1024= SXGA60 SXGA75 SXGA85
1440x900= WXGA60
1600x1200= UXGA60
1680x1050=WSXGA+60
1920x1200= WUXGA60(pixel-rate=154MHz)
HD: 480I60 576I50 480P60 576P50 720P60 720P50 1080I60 1080I50
1080P60 1080P50
Note:
1. Due to the limitation of Tri-level synchronies output
the image will shift to the left side of the screen when
component output at 720p/1080i/1080p.
2. If HDMI source includes HDCP(High-bandwidth Digital
Content Protection) output display is not support
HDCP decryption and no image will display.
 Build in EDID.
 HDMI 1.3 Compliant.

Operating Functions
and
Controls
Front Panel
The following sections describe the hardware components of the unit.
1. YPbPr/RGB switch:
Set the switch to RGB when your HDMI source equipment is PC
graphic card or other digital RGB source signal. Use HD-15 to HD-15
VGA cable to connect between the unit's RGB out and the RGB input
of your PC monitor or projector. Set the switch to YPbPr when your
HDMI source equipment is DVD player set-top-box or other High
definition digital video source. Use a VGA to 3 RCA adaptor cable to
connect the unit's YPbPr out to the YPbPr input connector of your
HDTV.
Note: When YPbPr output from HD-15 D-Sub the H-pin and V-pin will
remain the signal at the same time.
2. HDMI input:
Connect the HDMI input port to the HDMI output port of
your source equipment such as DVD player or set-top-box.
3. Power:
Plug the 5VDC power supply into the unit and connect the adaptor to
AC wall outlet.
Rear Panel
1. HD-15 D- ub output:
Connect the output port to the PC/YPbPr input of
analog PC monitor Projector or TV.
2 L/R:
Stereo audio output via 3.5mm phone jack.

Installation and
Connection
HDMI Pin

Configuration
Specifications
Operation frequency Up to 225MHz
Input port 1 x HDMI
Output ports 1 x HD-15 D-Sub (RGBHV or YPbPr)
1 x Analo L/R 3.5mm phone jack
Output signal RGB: 0.7Vp-p 75ohm
H/V: 3 to 5 Vp-p
Or Y: 1 Vp-p 75ohm
PB/Pr: 0.7 Vp-p 75ohm
Input/Output resolution PC: 640x480= VGA59 , VGA60, VGA72, VGA75,
VGA85
800x600= SVGA56, SVGA60, SVGA72, SVGA75,
SVGA85
1024x768= XGA60, XGA70, XGA75, XGA85
1152x864=MAC70, MAC75, MAC85
1280x800=WXGA60
1280x1024= SXGA60, SXGA75, SXGA85,
1440x900=WSXGA60
1600x1200= UXGA60
1680x1050=WSXGA+60
1920x1200= WUXGA60(pixel-rate=154MHz)
HD: 480I60, 576I50, 480P60, 576P50, 720P60,
720P50,
1080I60, 1080I50, 1080P60, 1080P50
HD I Audio In PCM2
HD I In Color Space RGB, YUV
Power Supply 5V/1A DC (US/EU standards, CE/FCC/UL certified)
Dimensions (mm) 76(W) x 30(D) x 92(H)
Weight(g) 172
Chassis aterial Aluminum
Silk Skin Color Silver
Operating Temperature Operatin from 0°C ~ 40°C
Power Consumption 2.5W (max)