Converters.TV 763 Installation manual

PAL NTSC Video to HDMI v1.3 HD
Scaler Box - ID# 7 3
Operation Manual

Introduction
This scaler Box is designed to display your composite video/S-video
images on the HDTV with better viewing resolutions. t can upscale
any composite video/s-video’s input sources to HDM output with
wide-range resolutions. Further, this device also can transfer sounds
for user to enjoy both HD images and sounds consistently.
Application
 Convert video to HDM 1.3 at 1080P for HDM LCD TV / LCD monitor
 Upscale iPod low resolution to HDM 1080P
 To improve video quality to HDM resolution
System
Requirements
nput source device, S-Video or CVBS/Video cable with R/L, HDM cable
and output displayer.
Features
 HDM 1.3 support deep color 12 bit, HDCP 1.1, DV 1.0 compliance
 Scales up Video or S-Video to HDTV 1080p format
 Automatic lip sync (audio delay) ensures audio video synchronization
 nput video systems NTSC/PAL
 Support 8/10/12 bit deep color on HDM output up to 6M long
 DV compatible by using HDM to DV adapter
 HQE (High Quality mage enhancer) function
 Digital Noise Reduction – Minimizes picture noise, reproducing images
true to the original
 Block Noise Reduction – Effectively minimizes all MPEG noise,
mproving the digital quality of HDTV broadcasts in particular, where
block noise happens most
 MPEG Noise Reduction – Reduce mosquito noise for MPEG video
images without losing detail
 Motion adaptive 3D Y/C separation comb filter
 3D (frame based) motion adaptive noise reduction
 Advanced 3D motion adaptive de-interlace
 Automatic 2:2/3:2 film mode detection
 Video / S-Video input selection button
 Automatic resolution selection and individual resolution selection
button
 HDM output with RGB color space design

Operation
Controls and
Functions
Front Panel
POWER selection button ①- Press the button once to power on the unit,
press again to power off. This device has last memory’s function and will
record your last input selection. The factory default is on CV input.
INPUT selection bottom② -
- Yellow ED illuminates when composite video is selected.
- Green ED illuminates when S-Video is selected.
AUTO selection button③ - Press the button to set the device in Auto
mode and the device will auto detected HDMI display’s EDID resolution
native then the resolution indicator ED will illuminate.
MANUAL selection button ④- Press “MANUA ” button to select
resolution of the HDMI output from VGA to 1080P.
Rear Panel
HDMI OUTPUT ①– Connect to CD TV/monitor with HDMI cable.
Note: 1. This scaler does not have overscan function however, it may be
adjusted by TV.
2. Audio sound will not perform if no input image.

SV/CV/RL INPUT② – Connect from source with S-Video/CVBS/Video
cable & R/ .
DC 5V ③– Plug the 5V DC power adapter into the unit and connect the
adapter to AC wall outlet.
Connection and
Installation
Output Resolution
Chart
RESOLUTION
VGA
480P
57 P
720P
1080I
1080P
640 X 480
720 X 480
720 X 576
1280 X 720
1920 X 1080
1920 X1080
60HZ
60HZ
50HZ
60HZ / 50Hz
60HZ / 50Hz
60HZ / 50Hz
OUPUT
NPUT
VGA 480P 576P 720P 1080 1080P
NTSC O O X O
(60Hz)
O
(60Hz)
O
(60Hz)
PAL X X O O
(50Hz)
O
(50Hz)
O
(50Hz)

Specifications
Input port Video / S-Video, Audio R/L RCA Jack
Output port HDM
Output resolution VGA, 480p, 576p, 720p, 1080i, 1080p@ 50/60
Input signal levels Video at 1vpp, 75Ω
Y: 1.0 Vp-p(75Ω)
C: 0.286 Vp-p(75Ω)
Audio L/R: 0.5Vrms
Video System NTSC, PAL
Audio Sampling Rate 48KHz
Power Supply 5V/2.6A DC (US/EU standards, CE/FCC/UL
certified)
Dimensions (mm) 100 x 157 x 25
eight (g) 332
Chassis Material Aluminum
Silk Skin Color Silver
Operating Temperature From 0 ℃~ 40 ℃
Power Consumption 5W(max)