MOUNTING
A
B
AB
6-3/4" dia. 97-1/4" overall
(171mm) (2470mm)
DESCRIPTION
Fail-Safe’s HDF Series high
pressure hose down
luminaire's sealed tubular
design withstands water
penetration, even when
subjected to a 1200 PSI high
pressure hose down test.
Stainless steel hardware
provides a water-tight seal by
compressing a high impact
resistant tube between two
fully gasketed end plates.
Water-tight connectors ensure
the integrity of the seal at the
point of power supply. The
ballast channel is constructed
of non-corrosive, non-rusting
aluminum. An emergency
battery pack is available as an
option. U.L. listed and C.S.A.
certified for wet locations.
Manufactured in accordance
with NSF standards.
• Heavy gauge aluminum
ballast channel and
stainless steel ballast
channel end plate are
finished with high
reflectance white powder
coat paint. Gloss: 85%;
Reflectance: 93%;
Hardness: 2H; Salt Spray:
500 Hours
• Heavy gauge aluminum
reflector finished with high
reflectance white powder
coat paint. Gloss: 85%;
Reflectance: 93%;
Hardness: 2H; Salt Spray:
500 Hours
• High impact resistant, DR
blended acrylic tube
• 1/2" thick opaque PVC
endcaps are fully sealed
with closed cell silicone
gasketing
• Standard Class P, CBM/ETL
ballast
• Five-foot, three-wire cord
and water-tight connector
is standard. Other cord
lengths are available
• Stainless steel sash chain
and S-hooks standard.
Heavy duty stainless steel
surface/wall mounting
bracket optional
DIMENSIONS
Ballast
LE3=Energy Saving
Ballast
Electronic Ballast(2)
EB51=(1) Ballast for
use with T5
Lamp
EB52=(2) Ballasts for
use with T5
Lamp
EB81=(1) Ballast for
use with T8
Lamp
EB82=(2) Ballasts for
use with T8
Lamp
EB21=(1) Ballast for
use with T12
Lamp
EB22=(2) Ballasts for
use with
T12Lamp
Notes: For additional options, consult your Cooper Lighting Representative. Specifications and Dimensions subject to change
without notice.
1Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information.
2For specific electronic ballasts, specify brand name and catalog number. 3Consult factory for cord length options and availability.
Lamp Type
2' Nom. Length
114=(1) 14W T5 Lamp
214=(2) 14W T5 Lamps
117=(1) 17W T8 Lamp
217=(2) 17W T8 Lamps
120=(1) 20W T12 Lamp
220=(2) 20W T12 Lamps
4' Nom. Length
128=(1) 28W T5 Lamp
228=(2) 28W T5 Lamps
132=(1) 32W T8 Lamp
232=(2) 32W T8 Lamps
140=(1) 40W T12 Lamp
240=(2) 40W T12 Lamps
160=(1) 60W T12HO Lamp
260=(2) 60W T12HO Lamps
148T8HO=(1)44W T8HO
Lamps
248T8HO=(2)44W T8HO
Lamps
8' Nom. Length
428=(4) 28W T5 Lamps
432=(4) 32W T8 Lamps
440=(4) 40W T12 Lamps
1110=(1) 110W T12HO Lamp
2110=(2) 110W T12HO Lamps
159=(1) 59W T8
259=(2) 59W T8
175=(1) 75W T12 Slimline
SL Lamp
275=(2) 75WT12 Slimline
SL Lamps
186=(1) 86W T8HO
286=(2) 86W T8HO
Series
HDF=Hose Down
Fluorescent
Voltage(1)
120=120V
240=277V
277=277V
347=347V
UNV=120V
through
277V
Options
EBP=Emergency
Battery Pack
GLR=Fuse and
Holder
Z=Low
Temperature
Starting Ballast
LL=Lamps Included
Accessories
(Order Separately)
DWC-X(3)=Quick
Disconnect
Power Cord
(X=Cord
Length)
SMB=Surface Mounting
Bracket Kit
CMB=Chain Mounting
Bracket
Standard Surface Mount Chain Mounting Bracket
HDF
17W-110W
HIGH PRESSURE
HOSE DOWN
LUMINAIRE
HD-PRO
1469
ORDERING INFORMATION
SAMPLE NUMBER: HDF-240-120-EB21-EBP-SMB
