Cooper Lighting COMBOLIGHT CR220M70 User manual

Catalog #
Type
Project
COMBOLIGHT® COMBO CLASSIC RECESSED
LAMP GROUP 2 - CONFIGURATION “E”
TWO (2) Metal Halide lamp cells - TWO (2) Fluorescent lamp cells
New Construction Recessed Housing - Trim or Trimless
ORDERING EXAMPLE:
= Two PAR20 Metal Halide 39W lamps with Two BIAX® 40W Fluorescent • Black Interior • White Trim • 120 volts
CR220M39 EBX40 BK WH 120
Fluorescent >> BX40 BX50 PLL80 PLT26 PLT32 PLT42 T528 T535 T5HO39 T5HO54
Lamp Group 2
Metal Halide
A65.18” 65.18” 65.18” 30.18” 31.18” 33.18” 112.18” 136.18” 88.18” 112.18”
B81.98” 81.98” 81.98” 46.98” 47.98” 49.98” 128.98” 152.98” 104.48” 128.98
C25.50” 25.50” 25.50” 8.00” 8.50” 9.50” 49.00” 61.00” 37.00” 49.00”
RSA LIGHTING®
RSA LIGHTING LLC 9660 - 9700 TOPANGA CANYON BLVD. CHATSWORTH CA. 91311
TOLL FREE: 800-356-3030 • 818-349-3030 • FAX: [phone] • www.rsalighting.com
©2003 RSA Lighting LLC All Rights Reserved • Specifications subject to change without notice.
SPECIFY - E
380º x 45º locking
angular adjustment
45º visual cut-off
Dual Fluorescent lamp cells
w/ integral ballast accessible from below
Integral reflector Integral reflector
Butterfly
Brackets
for Black Iron
Mounting
Thermal Protector
0.75" Trim
6.90"
7.00"
9.50"
8.75"
6.90"
B
A
CC
Ceiling compund
is applied right
to the edge of the
fixture opening
T
R
I
M
L
E
S
S
D
E
T
A
I
L
T
R
I
M
D
E
T
A
I
L
Must specify a diffuser or louver
for fluorescent cell. See below.
Ballast Ballast
Aromat®
Electronic
Metal Halide
Ballasts
Optional Accessories - See RSA Combo Classic accessory page for details.
Baffle Snoots Louvers Lenses
Fluorescent Diffusers and Louvers - Please specify
❑ TWD - Textured White Diffuser ❑ CB1 - 2” Parabolic Louver
❑ MPD - Conical Prism Diffuser ❑ CB2 - 1” Parabolic Louver
Custom configurations are available with Combo Classic fixtures.
Also available with T8 fluorescent lamps. Consult RSA for details
DESCRIPTION:
An adjustable recessed fixture
suitable for multiple downlighting
applications with one point of elec-
trical entry. Mixes the use of metal
halide lamps with fluorescent
lamps. Powder coat finish on hous-
ing & lamp assembly.
CONSTRUCTION:
Housing, Plaster Frame & Trim
Assembly: 18 gauge CRS. J-Box
Assembly: 16 gauge CRS (galva-
nized). Fixture is offered with a .75”
ceiling trim or as a trimless fixture.
Can accommodate 0.50” to 1.00”
ceiling thickness.
LAMP ASSEMBLY:
Two Metal Halide lamp cells with
two fluorescent lamp cells . Can
accept up to two optical acces-
sories. 380º x 45º locking lamp
adjustment. Provides 45º visual
cut-off.
SYSTEM PROTECTION:
Thermal protection provided to
guard against overheating, and
misuse of insulation over and
around fixture. Vent holes in hous-
ing provide cooler operation
ELECTRICAL:
Fixture is two circuit.
Circuit 1: Integral Aromat® elec-
tronic metal halide ballasts for
metal halide lamps.
Circuit 2: Integral electronic bal-
lasts for fluorescent lamps.
Lutron® dimming ballasts avail-
able upon request.
Junction box is UL listed for
through branch wiring, for 8 #12,
90°C supply conductors or 60°C for
end of run (access above ceiling
not required).
Made in the USA.
Item # / Lamp Type Configuration Fluorescent Lamp Cell Interior Finish Trim Finish Voltage
Lamp
Group 2
Metal
Halide
CR220M39 - PAR20MH 39W E - Two Metal Halide lamp
cells with Two
Fluorescent lamp cells
BX40 - 40W BIAX® BK - Black BK - Black 120 - 120 Volts
CR230M39 - PAR30MH 39W BX50 - 50W BIAX® WH - White WH - White 277 - 277 Volts
CR230M70 - PAR30MH 70W PLL80 - 80W PL-L S - Silver S - Silver
PLT26 - 26W PL-T PT - Custom PT - Custom
PLT32 - 32W PL-T TR - Trimless
PLT42 - 42W PL-T
T528 - 28W T5
T535 - 35W T5
T5HO39 - 39W T5HO
T5HO54 - 54W T5HO
T8 lamps also available