Corsair 200r User manual

INSTALLATION GUIDE

Thank you for purchasing a Corsair®
Carbide Series®200R. With its elegant
design and extensive feature set, 200R
is a great case for beginning builders,
or anybody looking for a compact,
easy-to-use case.
Easy builds
Less work. More play. Build with the Carbide Series
200R and the only time you’ll need to pick up a
screwdriver is to install the motherboard.
Side panel thumbscrews
PCI-E expansion card thumbscrew mounts
Tool-free SSD, hard drive, and optical
drive installation
Cutouts for cable routing and CPU cooling
Easy to expand, and easy to cool
Carbide Series 200R is compact, but it’s designed
to let you build high-performance systems with
massive storage, extra graphics performance,
and superior cooling and ventilation.
Seven PCI-E slots with room
for cards up to 320mm long
Install up to four hard drives
and four SSDs at once
Up to eight fan mounts (depending
on hard drive configuration)
Easy to use
The mid-tower form factor combines
room for expandability and out-of-the-way
exterior dimensions.
Front panel USB 3.0, headphone
and microphone ports
Dust filters behind the front intake fans
help keep the interior clean
THANK YOU
!
CONTENTS
Rubber fan mounts Fan screws (short) Fan screws (long)
x x x
MBD/HDD screws ODD/SSD screws Cable ties
x x x
MaximumGPUlength
Topslots mm
Lowerslots mm
MaximumCPU
coolerheight
mm

A
F
G
H
I
J
K
B
C
D
E
Dual 120mm/140mm fan mounts
compatible with 240mm/280mm radiators
Dual 120mm/140mm fan mounts
USB 3.0 (x2) Headphone/Mic, Power/Reset
Dual 120mm fan mounts
CPU backplate cutout
mm mm
mm
AF
G
H
I
J
K
B
C
D
E
Built-in cable routing cutouts
Tool-free optical drive bays
Tool-free 3.5" hard drive cage with 2.5" compatibility
Seven expansion slots for GPUs
Removable dust filters
Built-in cable routing channel
CARBIDE SERIES® 200R MID-TOWER CASE BRILLIANT DESIGN, INSIDE AND OUT™




n Install your motherboard’s I/O shield
(see motherboard manual for guidance)
n Align motherboard with the standos in the case
n Secure with included screws (MBD/HDD screws)
Installing the motherboard

Removing the side panels
n Unscrew thrumbscrews and remove,
then pull side panels outward






n Remove thumbscrews and corresponding slot cover(s)
n Install the add-on card & secure with thumbscrew
Installing the PCI-E/PCI Cards

Installing the Power Supply (PSU)
n Place PSU on the bottom of the case
n Align holes & secure with screws
n NOTE: PSU can be installed in either
fan up or fan down orientation




n Place the drive into the tool-free cage until you feel it secure
n To remove the drive, pull tab to release
Installing 3.5" HDD/ 2.5" SSD

Installing 5.25" Drive/Devices
n Remove the front panel blank for the 5.25" drive bay
n Insert the drive, pulling back the tool-free latch until
it aligns with the mounting holes on your device, then release


USB 3.0
HD AUDIO RESET SW POWER LED +
POWER LED –POWER SW HDD LED
n See motherboard manual for front panel
header locations and pin-outs
Installing front I/O connectors

Attach case fan cables to motherboard headers
n See motherboard manual for fan header locations
