Corsair CRYSTAL SERIES 570X User manual

CRYSTAL SERIES 570X
Case Specifications
Length......................................................................................................mm
Width .......................................................................................................mm
Height ......................................................................................................mm
MaximumGPUlength .......................................................................mm
MaximumCPUcoolerheight .........................................................mm
MaximumPSUlength........................................................................mm
Fanlocations
Front .........................................................................xxmm
Top....................................................................................xmm
Rear...................................................................................................mm
Radiatorcompatibility
Front ............................................................................... mmmm
Top.....................................................................................................mm
Rear...................................................................................................mm
234mm
512mm
480mm
INSTALLATION GUIDE

CRYSTAL SERIES 570X
87
Case Features
Accessory Kit Contents
Tempered Glass Side Panels
Tempered Glass Front Fascia
Tempered Glass Top Panel
Dust Filters
Rear HDD Mounts
Rear SSD Mounts
Removable Fan Trays
PSU Cover
(x3) SP120 front fans (570X RGB uses SP120 RGB)
A
B
C
D
E
F
G
H
I
H
DA
G
E
D
C
B
G F
I
A
ax6
Cable ties
fx1
Motherboard
stando
dx12
Short fan screws
ex8
Long fan screws
b
MBD/HDD screws
x20 cx8
SSD/ODD screws
gx2
Hook and Loops
Straps

CRYSTAL SERIES 570X
4. Installing SSDs
3. Installing HDDs
2. Installing the Motherboard
1. Removing the Side Panels
Remove the thumbs screws
and pull the side panel o.
Snap your motherboard’s I/O
shield into the cutout.
Align the motherboard with
the standos in the case.
Secure with the included
screws.
Step 1 – Place the drive into
the 3.5" drive tray.
Step 2 – Slide the drive and
rail assembly into the HDD
mounting location behind the
motherboard as shown.
400C_400Q STEP 3
Step 2
Step 1
1. Remove the screws to
release the drive tray
from the back of the
motherboard tray.
2. Slide the 2.5" drive into
the tray until it snaps
into place.
3. Reattach the drive tray
to the back of the
motherboard tray.
600C_600Q Step 5
1
2
3

CRYSTAL SERIES 570X
8. Installing the Front I/O Connectors
7. Removing the Front and Top Panels
6. Installing PCI-E/PCI Card(s)
5. Installing the Power Supply
Remove the thumb screws and
pull o the glass panel.
Install the PSU into the
lower chamber of the case,
and secure with four screws
from behind.
400C_400Q STEP 5
1. Remove thumbscrews and
corresponding slot covers.
2. Install the expansion
card and secure with
thumbscrews.
1
400C_400Q STEP 6
2
USB 3.0
HD AUDIO RESET SW POWER LED +
POWER LED –POWER SW HDD LED
See your motherboard’s manual for front panel header locations and pin-outs.

CRYSTAL SERIES 570X
Frequently Asked Questions9. Removing Fan Trays
10. Using RGB Fan Controller (570X - RGB)
Unscrew fan tray and slide out
from chassis to install fans and
radiators outside of chassis.
See Included RGB Fan
controller Quick Start Guide
for detailed instructions.
1. Does the polarity matter with the I/O panel’s power
and reset header?
No, only the LED headers.
2. Where can I mount a fan?
Fan Mount Locations
Front 3x120mm, 2x140mm (3x120mm included)
Top 2x140mm/120mm
Rear 120mm (included)
Bottom x
Side x
Mid x