Costway HONEY JOY TQ10031 User manual

Six Wheeled ATV
TQ10031

Please read all instructions carefully and keep it for future reference.
Warnings:
Attention! Use it with protective equipment.
Attention! Not use it in the traffic.
Attention! The product is not suitable for the children under 3 years.
General Warnings:
The product must be installed and used under the supervision of an adult.
Read through each step carefully and follow the proper order.
Remove all packaging, separate and count all parts and hardware.
Please ensure that all parts are correctly installed, incorrect installation can lead to a danger.
We recommend that, where possible, all items are assembled near to the area in which they
will be placed in use, to avoid moving the product unnecessarily once assembled.
Ensure a secure surface during construction, und place the product always on a flat, steady
and stable surface.
Please use the product carefully, as the product requires great skill, avoid accidents by the
user or others, by fall or collision.
Please wear suitable protective equipment during use, e.g. protective helmet, gloves, knee
pads, elbow pads etc.
02

03

04

05
Charger
Front fork cover
Front fork
10
Gasket

06

07
Press the wheel cover on the wheel.
4. Installation of steering shaft
Insert the steering shaft into the body according to the body hole
position.

08
5
6

09
7. Installation of the rear wheel
A. First, put the two rear axles through the body
B. rear wheel (with drive plum) into the rear axle with drive motor, pad
with spacers, and then lock with M10 mechanical screws.Press the wheel
cover on the wheel.
8. Installation of tap
A. Connect the wire（a）from the right speed control handle on the
mixer to the wire（b）on the body.
B. Insert the front fork into the steering shaft in the direction shown,
fit the 12 gasket and the 8 gasket in turn, and then lock it with M8
nut to fix.Press the front fork cover.

10
10