Costway EL10001 User manual

Please give us a chance to make it right and do better !
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP !
Contact Us!
Do NOT return this item.
Safety Box
EL10001
USER’S MANUAL
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
US office: Fontana UK office: Ipswich AU office: Truganina
DE office: Hamburg
FR office: Saint Vigor d'Ymonville PL office: Gdańsk
US:[e-mail]
UK:[e-mail]
AU:[email protected]

Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled
near to the area in which they will be placed in use, to avoid
moving the product unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product
away from babies and children as they potentially pose a serious
choking hazard.
03

04 05
Opening the safe for the first time
Change password
Change password 123456:
Change password 1234:
1. Move the Battery box cover to the left.
2. Insert the emergency key and turn anti-clockwise to the limit and hold.
3. Powered by four AAA batteries.
4. Turn the knob clockwise, the door open.
Take out the shelf and
put it on the rack in safe.
Take out battery cover
from the box and fit it.
1. Press the button “*” key to automatically enter the automatic alarm state,
and at the same time all three red, yellow and green lights on the screen will
light up, and the alarm can be canceled by entering the correct password
when the alarm is triggered.
2. When each door is opened, the vibration alarm turns off, and needs to be
turned on again. If the wrong password is entered 3 times in a row, the alarm
will turned on. Enter the correct password to clear the alarm.
ATTENTION: DO NOT LEAVE THE BACKUP KEY IN THE SAFE, OR THE
SAFE CANNOT BE OPEN IF THE ELECTRONIC SYSTEM MALFUNCTIONED.
There are two sets of independent initial password: 1234 and 123456
1. With safe door opening, press the green button inside the safe box to light
yellow indicator.
2. Enter any 3-8-bit password end with button # and re-enter the new
password again end with button # to confirm password changing.
1. With safe door opening, press o twice, then press the green button inside
the safe box, yellow light on.
2. Enter any 3-8-bit password end with button # and re-enter
the new password again end with button # to confirm password changing.
Vibration alarm
Assembly