Costway HW66548 User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
EN
DE
FR
ES
IT
PL
With your inspiring rating, COSTWAY will be more consistent to offer you EASY
SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
Mit Ihrer inspirierenden Bewertung wird COSTWAY konsistenter sein, um Ihnen EIN
SCHÖNES EINKAUFSERLEBNIS, GUTE PRODUKTE und EFFIZIENTEN SERVICE zu
bieten!
Avec votre évaluation inspirante, COSTWAY continuera à fournir une EXPÉRIENCE
D’ACHAT PRATIQUE, des PRODUITS DE QUALITÉ et un SERVICE EFFICACE !
Con su calificación inspiradora, COSTWAY será más consistente para ofrecerle
EXPERIENCIA DE COMPRA FÁCIL, BUENOS PRODUCTOS y SERVICIO EFICIENTE.
Con la tua valutazione incoraggiante, COSTWAY sarà più coerente per offrirti
ESPERIENZA DI ACQUISTO FACILE, BUONI PRODOTTI e SERVIZIO EFFICIENTE!
Dzięki twojej opinii COSTWAY będzie mógł oferować jeszcze WYGODNIEJSZE
ZAKUPY, LEPSZE PRODUKTY i SPRAWNIEJSZĄ OBSŁUGĘ KLIENTA.
Security Safe Box
HW66548
USER’S MANUAL
US office: Fontana UK office: Ipswich AU office: Truganina
DE office: Hamburg FR office: Saint Vigor d'Ymonville PL office: Gdańsk

02 03
OPERATING INSTRUCTIONS
Please do not keep emergency override keys in your safe! (factory
setting code is “123456”)
1. Open The Safe Box for The First Time or Emergency Open
Insert the emergency override key into the keyhole, and turn the key
in counter-clockwise direction. At the same time, turn the knob of
control panel clockwise direction to open your safe.
2. Installation and Replacement of the Battery
After opening your safe, push the battery cover plate on the back of
the door, install the batteries. (Please install the anode and cathode
of the battery correctly).
3. SET THE CODE
A. With the door open, press the red button (reset button) on the
back of the door near the hinge, release it and you will hear one
“tick”.
B. Enter new password (6-12 numbers), and confirm by pressing “#”
(eg. “123456#”). You will hear four “beep”. The new password is set
up.
This safe allows the customer to set 2 sets of code. Set the
2nd code:
A. With the door open, touch the screen, the panel lights up, enter
“00”. You will hear one “beep”.
B. Press the red button (reset button) on the back of the door near
the hinge, release it and you will hear one “tick”.
C. Enter new password (6-12 numbers), and confirm by pressing “#”
(eg. “123456#”). You will hear four “beep”, the new password is set
up.
Write down your new password immediately and check
whether your new combination has been programmed.
4. USE YOUR SAFE
To open the safe, touch the screen, the panel lights up, enter your
password and “#”, you will hear two “beeps”. The “RIGHT” light is on,
turn the knob of the control panel in clockwise direction within 3
seconds to open your safe.
5. INSTALL THE SAFE
To reduce the risk of the theft of the safe. It can be secured to the
floor, wall or in a cupboard. For your convenience, there are holes on
the back and in the bottom. Therefore it can be fixed by the
expansion bolts.
CAUTION: The safe should be placed vertically when installing the
safe.