Costway HW50956 User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
EN
DE
FR
ES
IT
PL
With your inspiring rating, COSTWAY will be more consistent to offer you EASY
SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
Mit Ihrer inspirierenden Bewertung wird COSTWAY konsistenter sein, um Ihnen EIN
SCHÖNES EINKAUFSERLEBNIS, GUTE PRODUKTE und EFFIZIENTEN SERVICE zu
bieten!
Avec votre évaluation inspirante, COSTWAY continuera à fournir une EXPÉRIENCE
D’ACHAT PRATIQUE, des PRODUITS DE QUALITÉ et un SERVICE EFFICACE !
Con su calificación inspiradora, COSTWAY será más consistente para ofrecerle
EXPERIENCIA DE COMPRA FÁCIL, BUENOS PRODUCTOS y SERVICIO EFICIENTE.
Con la tua valutazione incoraggiante, COSTWAY sarà più coerente per offrirti
ESPERIENZA DI ACQUISTO FACILE, BUONI PRODOTTI e SERVIZIO EFFICIENTE!
Dzięki twojej opinii COSTWAY będzie mógł oferować jeszcze WYGODNIEJSZE
ZAKUPY, LEPSZE PRODUKTY i SPRAWNIEJSZĄ OBSŁUGĘ KLIENTA.
Security Safe Box
HW50956
USER’S MANUAL
US office: Fontana UK office: Ipswich AU office: Truganina
DE office: Hamburg FR office: Saint Vigor d'Ymonville PL office: Gdańsk

First read the manual carefully before you start using the safe.
Product description:
This product is designed for moderate security risks in domestic
premises and is not fire resistant.
Installation:
Choose a location where this product will be convenient to use, but
not easily visible to an intruder. Inside a fitted wardrobe or cupboard
is often suitable. If possible, select a position where the unit can be
bolted to both wall and floor as security will be much higher if it is
fixed to two surfaces. Wall fixing must always be to a solid wall, not a
stud wall.
Preparation for use:
This product is battery operated. Batteries are not supplied. Only use
1.5V AA batteries.
For your convenience, we have engineered a manual override system
for your safe. To open the door of the safe for the first time, just
remove the battery cover plated (d)(see diagram 1). You will find the
keyhole, insert the key into the keyhole and turn it in a
counter-clockwise direction, turn the knob (a) in a clockwise
direction. This will manually open your safe.
To install the batteries
After opening the safe, just remove the battery cover plate and install
the four batteries.
Ensure the + and – positions are correct. The display (e) will scan the
status of the electronic system automatically. If it is in order the
display will show “goods”.
Opening the safe after installing the batteries:
To open the door of the safe, press the button “START”(c) (see
diagram 1), the display on the panel will show"-----", then input one
of the two sets of factory-preset codes:
0.0.0.0.0.0. (user code) or 8.8.8.8.8.8.(master code) immediately
and confirm by pressing the button “START”. The display will show
“OPEN” and use the knob within 4 seconds.
Setting the code:
The safe can be programmed with two sets of codes. For your safety,
after opening the safe and installing the batteries, you should set two
sets of new codes to replace the two sets of factory preset codes.
123
456
7
0
(h)
(f)
(g)
(e) (d)
(diagram 1)
(a)
START
8 9
02 03
(b)
(diagram 2)

Override key:
For your convenience, we have engineered a manual override system
for your safe. If you forget or misplace your combination, remove the
battery cover place and take out the batteries. Your will find the
keyhole, insert the key into the keyhole and turn it in a
counter-clockwise direction, turn the knob in a clockwise direction.
This will manually open your safe any time. This product is supplied
with 2 original keys.
Do not keep the key in your safe. In event of battery failure you will
not be able to open the safe.
Programming the user code:
A.Press the red button(b)(see diagram 2), then release it and display
on the panel will show”-----“
B.Press “START” immediately.
C.Now press your 6 digits that you wish to use as a new user code.
The display will show “IN” and your inputting numbers. It means that
the new user code is confirmed.
Programming the master code:
A.Press the “START” button. The display will show “-----“.
B.Now input your new 6 digits
C.Press the red button inside (b) (see diagram 2). The display will
show “IN”. It means that new master code is confirmed.
If you or an intruder uses the incorrect group of numbers, the display
will show ”ERROR” and it will not open.
If the incorrect combination code is used 4 times consecutively, the
display will show “ERROR” and the system cannot be entered until 3
minutes later. The override key can be used to open the door during
the 3 minutes. If the key is used to open the door, the buzzer can be
cleared by pressing the red button.
Battery replacement:
To test the batteries, just press the button “START”. If the batteries
are low, the display will show “LOBAE”, AND YOU SHOULD REPLACE
THE BATTERIES. The safe requires 4 X size “AA” (1.5V R06) batteries.
Replace the old battery, the display will scan the status of the
electronic lock system automatically. If it is in order, the display will
show “GOOD”. Use of alkaline batteries is recommended.
04 05