COUGAR DarkBlader S User manual

ECable management bar OAir filter for front panel
FGraphic card holder PTop panel
GCable management cover Q3 x 140 / 3 x 120mm fans
for front panel (optional)
Installing the Front I/O Connectors
Installing the Built-in LED Controller Connectors
RGB Strip at
Front Panel
RGB SW
at Front I/O Bezel
RGB SW
Power Connector
USB 3.0 HD AUDIO
HD AUDIO
POWER SW
POWER SW
R2 x 140 / 3 x 120mm fans
for top panel (optional)
HSlot cover
S120mm fan for rear panel
(pre-installed)
IWater cooling reservoir /
pump stand
3.5”HDD trays
(compatible for 2.5”HDD/SSD)
J
Power button / RGB SW button
AK3.5”HDD cage
CFront panel MAir filter for bottom panel
DTempered glass side panels NAir filter for top panel
USB 3.0 / HD audio ports
BL3.5”HDD trays
(compatible for 2.5”HDD/SSD)
RGB Strip
at Front I/O Bezel
5V Addressable
Header Adapter
VDG

Power suppy
FAN 1
FAN 2
LED Strip 1
RGB Strip at Front Panel / LED Strip 2
RGB Strip at Front I/O Bezel
/ FAN 5
FAN 3
Power Connector
RGB SW at Front I/O Bezel
FAN 4
FAN 6
5V Addressable Header Adapter
VDG
for Compatible Gigabyte
Motherboards
for Compatible Asus or MSI
Motherboards
Please don't remove the
SATA connector from the PSU.
RGB SW