Cradlepoint AER1600 Series User manual

Choose 2Rent
Phone [phone]
Fax [phone]
[e-mail]
www.choose2rent.com
page 1 of 3
2. Connect the Power Adapter to the Power Port
3. Connect Printers with Ethernet Cables
4. Connect (Optional) hardwired Internet
Connect your Equipment
Option 1:
Using LAN Internet
1. Connect the router with your
local internet using the blue
port on the back of the router.
Option 2:
Using Mobile Internet
1. The router comes with a built
in VERIZON SIM card upon
request
Please allow 3-4 minutes for the
router to boot and the modem to
establish cellular connection.

page 2 of 3
5. Connect Modem Antennas to AUX and MAIN –Finger-tighten only

page 3 of 3
•The indicator lights turn on and your device is ready to use
•Your Rental devices are automatically connected to the Wireless
network. If you need to add additional devices, you can find the
network name and password on the top of the router.
•You can now connect printers or other devices using the additional
Ethernet Outlets in the back of the Router marked with the numbers 1
to 4.
•Depending on your requested order, if using the hard-line LAN/WAN
option as your main connection, your SIM 3G/4G Network is activated
as a failback in the event your main LAN/WAN line has been
disconnected from service. This will allow you to continue without any
interruption in your service.
Please note: If you use Option 2 in Step 1, some public internet
providers (hotels or similar) require to login or accept their terms &
conditions. Please connect a computer or tablet PC to the router (Wi-Fi
or wired) and open an internet browser to test the connection or follow
the instructions from the internet provider.
Identifying LED’s
Please call our support team if you need assistance
setting up your rental devices
1(800) 622-6484