Crestron 4 Series User manual

ZUM-HUB4
4-Series™ Control Processor for Zūm®
Lighting Control System
Product Manual
Crestron Electronics, Inc.

Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.
Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a
limited nonexclusive, nontransferable Software Development Tools License Agreement. Crestron product operating
system software is licensed to Crestron dealers, CSPs, and end-users under a separate End-User License Agreement.
Both of these Agreements can be found on the Crestron website at www.crestron.com/legal/software_license_
agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.
Crestron, the Crestron logo, 4-Series, Cresnet, XiO Cloud, Crestron Toolbox, SIMPL+, and Zūm are either trademarks or
registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. BACnet is either a
trademark or registered trademark of American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. in
the United States and/or other countries. Bluetooth is either a trademark or registered trademark of Bluetooth SIG, Inc.
in the United states and/or other countries. Active Directory is either a trademark or registered trademark of Microsoft
Corporation in the United States and/or other countries. UL is either a trademark or registered trademark of UL LLC in
the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in
this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any
proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or
photography.
©2021 Crestron Electronics, Inc.

Contents
Overview 1
Features 2
Zūm Net Wired Technology 2
Web-Based Management 2
Time Clock 2
BACnet™ Communications Protocol 3
Crestron XiO Cloud® Service Integration 3
Zūm Wireless Integration 3
Zūm System Integration with Other Crestron Control Systems 3
Physical Description 4
Specifications 6
Product Specifications 6
Dimension Drawings 9
Installation 10
Mount to a Rack 10
Place onto a Flat Surface 10
Make Connections 10
Configuration 13
Zūm App Configuration 13
Zūm App Main Screen 13
Calibrate Daylighting Settings 18
Log into the Web-Interface 22
Web Interface Overview 23
Category View, System View, and Settings View 24
Global Settings and Actions for the ZUM-HUB4 25
Navigation Toggle 26
Device Information and Status 26
Web Interface Configuration 26
Discover Rooms 27
Add a Room Category 28
Rename a Room Category 28
Turn Rooms On or Off 28
Set the Bluetooth PIN 30
Configure the Demand Response Mode and Level 33
Manage Rooms 37
Schedule Room Behavior 41
Manage Floors 49
Manage Devices 50
Product Manual — Doc. 9094B Contents • i

Manage Settings 54
Manage Users 58
Manage External Controls 60
Manage Commissioning 63
Review Device Information and Status 66
Reboot ZUM-HUB4 67
ii • Contents Product Manual — Doc. 9094B

iii • Contents Product Manual — Doc. 9094B

Product Manual — Doc. 9094B ZUM-HUB4 • 1
Overview
The Crestron® ZUM-HUB4 enables centralized management for Zūm® commercial lighting
systems of up to 1,000 rooms with an Ethernet switch (sold separately) across Zūm wired, Zūm
wireless, and external spaces. The device provides a web-based user interface for control. A
built-in time clock enables room lighting and occupancy and vacancy sensing automation. The
ZUM-HUB4 can also be integrated with other Crestron lighting systems and control systems.
The ZUM-HUB4 is featured in three kits.
lZUML-HUB4-GW: 4-Series™ Control Processor for Zūm® Lighting Control System with
Wireless Gateway and Power Supply
Contains:
oZUM-HUB4 and PW-2420RU power pack
oZUMNET-GATEWAY: Zūm® Net Wireless Gateway for Zūm Light Control System
oPW-2407WU: Wall Mount Power Pack, 24VDC, 0.75A, 2.1 mm, Universal
For use with the ZUMNET-GATEWAY
lZUML-HUB4-PAK: Zūm® Lighting Control Processor Panel, Basic
Contains:
oZUM-HUB4 and PW-2420RU power pack
oCEN-SW-POE-5: 5-Port PoE Switch
oGLEX-FT-24-HC: Feed-Through Enclosure, 24 Circuits, Hinged Cover
lZUML-HUB4-CN-PAK: Zūm® Lighting Control Processor Panel, Expanded
Contains:
oZUM-HUB4 and PW-2420RU power pack
oDIN-AP4: 4-Series™ DIN Rail Control System
oDIN-EN-6X18: Enclosure for DIN Rail Devices, 6 DIN Rails, 18 M Wide
oCEN-SW-POE-5 (x2): 5-Port PoE Switch
oDIN-HUB (x2): DIN Rail Cresnet Distribution Hub
oDIN-PWS60 (x2): DIN Rail 60 Watt Cresnet® Power Supply
For use with the DIN-HUB
•Features
•Physical Description

2 • ZUM-HUB4 Product Manual — Doc. 9094B
Features
lCentralized management for Zūm® commercial lighting systems
lProvides web-based user interface for easy configuration, control, scheduling, and
monitoring
lTime clock for room lighting automation and sensing behavior
lDaisy-chain up to 20 Zūm Net load controllers (sold separately) via their built-in Zūm Net
ports for room-to-room communication
lUse with an Ethernet switch (sold separately) to support multiple Zūm Net daisy-chains
up to 1,000 rooms
lDaisy-chain up to 32 Zūm Link devices (sold separately) via their built-in Zūm Link ports for
in-room communication
lBACnet™ communication supports control for up to 9,000 BACnet objects
lDedicated Control Subnet
lGigabit Ethernet networking
lEnterprise-grade security
lEnables integration with other Crestron lighting systems, control systems, touch screens,
shading, HVAC, and more
lSingle-space rack-mountable
lUniversal 100–240V external power supply
Zūm Net Wired Technology
Zūm Net wired technology offers room-to-room communication. Control a room with one Zūm
Net device (ZUMNET-JBOX-DALI,ZUMNET-JBOX-16A-LV, sold separately), and daisy-chain up
to 20 Zūm Net devices with CBL-CAT5E-ZUMNET-P cable. For centralized management of a
Zūm Wired System, connect the chain directly to a ZUM-HUB4 or multiple chains to an Ethernet
switch (sold separately) to support up to 1,000 rooms.
Web-Based Management
The web browser user interface can manage, monitor, and schedule all of the available rooms on
the network. Use a laptop computer (not included) to configure devices to work with the
ZUM-HUB4. Active lighting scenes, daylight levels, occupancy detection, and scheduled time clock
events are displayed. Errors are shown to facilitate troubleshooting.
Time Clock
A built-in time clock enables automated lighting control based on the time of day. Assign a Room
Category (such as Office or Hallway) for consistent control and programming across multiple
rooms. The clock allows Day Pattern arrangement for each Room Category, with up to 24 Room

Product Manual — Doc. 9094B ZUM-HUB4 • 3
States scheduled over a 24 hour period. Different Day Patterns can be defined and assigned to
the calendar, which is pre-populated with typical day patterns and a selection of U.S. holidays.
BACnet™ Communications Protocol
Communicate with a Building Management System (BMS) to provide control of fire/life safety,
lighting, and other building automation systems. The ZUM-HUB4 supports up to 9,000 BACnet
objects.
Crestron XiO Cloud® Service Integration
Use Crestron XiO Cloud functionality for remote commissioning and monitoring of a Zūm Wired
system. Commissioning and monitoring can also be accomplished through custom programming.
Zūm Wireless Integration
Integration with existing Zūm Wireless installations is achieved with a ZUMNET-GATEWAY (not
supplied), which connects to the ZUM-HUB4 via Ethernet.
Zūm System Integration with Other Crestron
Control Systems
In addition to managing rooms equipped with Zūm lighting control, the ZUM-HUB4 enables
integration with other Crestron systems over an Ethernet connection. Two methods of
integration are available:
lExternal Rooms: A virtual room using legacy or conventional Crestron lighting control can
be added to the Zūm network to be monitored, controlled and scheduled.
lMirrored Rooms: An external Crestron system controls and monitors a room equipped
with a Zūm system. Mirrored rooms allow for room control with a Crestron touch screen or
handheld remote, as well as integration with shading, climate control, AV, and other
equipment.

4 • ZUM-HUB4 Product Manual — Doc. 9094B
Physical Description
Connectors and Card Slots
MEMORY (1) SD memory card slot;
Accepts one 32 GB SD or SDHC card to enable logging and for troubleshooting
purposes
USB (1) USB Type A connector, female;
USB 2.0 host port (not used)
LAN (1) 8-pin RJ-45 connector, female;
10Base-T/100Base-TX/1000Base-T Ethernet port;
Connects to the customer’s LAN
CONTROL SUBNET (1) 8-pin RJ-45 connector, female;
10Base-T/100Base-TX/1000Base-T Ethernet port;
Provides a dedicated local network for Zūm Net wireless gateways
NET (1) 4-pin 3.5 mm detachable terminal block;
Not used
24VDC 2.0A (1) 2.1 x 5.5 mm DC power connector;
24VDC power input;
PW-2420RU power pack included;
Passes through to NET port
G(1) 6-32 screw;
Chassis ground lug
COMPUTER (front) (1) USB Type B connector, female;
USB 2.0 device port for configuration via computer console (cable included)
Controls and Indicators

Product Manual — Doc. 9094B ZUM-HUB4 • 5
PWR (1) Green LED;
Indicates operating power supplied from the included power pack
NET (1) Amber LED;
Not used
MSG (1) Red LED;
Indicates that the ZUM-HUB4 has generated an error message
HW-R (1) Recessed pushbutton for hardware reset
SW-R (1) Recessed pushbutton for software reset
LAN (rear) (2) Bi-color green/amber LEDs;
Left LED indicates Ethernet link status and connection speed;
Right LED indicates Ethernet activity
CONTROL SUBNET
(rear) (2) Bi-color green/amber LEDs; Left LED indicates Ethernet link status and connection speed;
Right LED indicates Ethernet activity

6 • ZUM-HUB4 Product Manual — Doc. 9094B
Specifications
ZUM-HUB4 specifications for device support and time clock, communications, connectors and
card slots, controls and indicators, power, environmental, dimensions, weight, and compliance
certifications.
•Product Specifications
•Dimension Drawings
Product Specifications
Device Support and Time Clock
Rooms 1,000 maximum;
Zūm wired, Zūm wireless, and external
External Rooms and
Mirrored Rooms Varies by control system based on hardware capabilities and program complexity of the external processor
Communications
Ethernet 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half
duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH,
SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE
802.1X, SNMP, IPv4 or IPv6, Active Directory® authentication, IIS v.6.0 web
server
Control Subnet 10/100/1000 Mbps Ethernet, auto-switching, auto-negotiating, auto-discovery,
full/half duplex, DHCP server, DNS Server, port forwarding, isolation mode
USB Supports computer console via front panel USB 2.0 device port
Connectors and Card Slots
MEMORY (1) SD memory card slot;
Accepts one 32 GB SD or SDHC card to enable logging and for troubleshooting
purposes
USB (1) USB Type A connector, female;
USB 2.0 host port;
For firmware upgrades
LAN (1) 8-pin RJ-45 connector, female;
10Base-T/100Base-TX/1000Base-T Ethernet port;
Connects to the customer’s LAN
CONTROL SUBNET (1) 8-pin RJ-45 connector, female;
10Base-T/100Base-TX/1000Base-T Ethernet port;
Provides a dedicated local network for Zūm Net wireless gateways and wired
rooms

Product Manual — Doc. 9094B ZUM-HUB4 • 7
NET
(24 Y Z G) (1) 4-pin 3.5 mm detachable terminal block; Connects to a GLS-SIM which facilitate Demand Response when connected to
a non-system sensor, such as a GLS-ODT-C-NS;
Not used for power
24VDC 2.0A (1) 2.1 x 5.5 mm DC power connector;
24VDC power input;
PW-2420RU power pack included
G(1) 6-32 screw;
Chassis ground lug
COMPUTER
(front) (1) USB Type B connector, female; USB 2.0 device port for configuration via computer console (cable included)
Controls & Indicators
PWR (1) Green LED;
Indicates operating power supplied from the included power pack
NET (1) Amber LED;
Not used
MSG (1) Red LED;
Indicates that the ZUM-HUB4 has generated an error message
HW-R (1) Recessed pushbutton for hardware reset
SW-R (1) Recessed pushbutton for software reset
LAN (rear) (2) Bi-color green/amber LEDs;
Left LED indicates Ethernet link status and connection speed;
Right LED indicates Ethernet activity
CONTROL SUBNET
(rear) (2) Bi-color green/amber LEDs; Left LED indicates Ethernet link status and connection speed;
Right LED indicates Ethernet activity
Power
Power Pack (included) Input: 100–240VAC, 50/60 Hz;
Output: 2.5A @ 24VDC
Model: PW-2420RU
Power Consumption 15 W
Environmental
Temperature 41° to 113°F (5° to 45°C)
Humidity 10% to 90% RH (noncondensing)
Heat Dissipation 50 BTU/hr
Enclosure
Chassis Metal, black finish
Faceplate Extruded metal, black finish, polycarbonate label overlay
Mounting Freestanding or 1 RU 19-inch rack-mountable;
Adhesive feet and rack ears included

8 • ZUM-HUB4 Product Manual — Doc. 9094B
Dimensions
Height 1.70 in. (43 mm) without feet
Width 17.28 in. (439 mm);
19.00 in. (482 mm) with rack ears
Depth 6.47 in. (165 mm)
Weight
3.1 lb (1.42 kg)
Compliance
Regulatory Model: M201903003
UL® Listed for US & Canada, IC, CE, FCC Part 15 Class B digital device, UL 916, CEC Title 24, ASHRAE 90.1,
IECC
NOTES:
lSIMPL+® software modules are provided for use in commissioning a Crestron control
system to work with the ZUM-HUB4. The software modules run within the control
system program and provide virtual connections for all the necessary intersystem control
signals. A separate dedicated module is required for each external and mirrored room.
Control systems are limited in the number of modules supported, ranging from 0 to
1000 depending on the model. For further assistance, please contact Crestron
Commercial Lighting Support via email at [email protected] or by calling 855-
644-7643.
lOther Crestron control systems must be commissioned to provide the control logic
required to communicate and operate as part of the Zūm network. Once integrated,
each external room effectively becomes a part of the Zūm ecosystem.

Product Manual — Doc. 9094B ZUM-HUB4 • 9
Dimension Drawings

10 • ZUM-HUB4 Product Manual — Doc. 9094B
Installation
Mount the ZUM-HUB4 and connect it to the network. The ZUM-HUB4 can be mounted into a
rack or placed onto a flat surface.
Mount to a Rack
The ZUM-HUB4 occupies 1U of rack space.
To install the included rack ears:
1. Use a #1 or #2 Phillips screwdriver to remove the three screws from each side of the front
of the device as shown in the following illustration.
2. Use the screwdriver and the screws removed in the previous step to attach the included
rack ears to the device.
3. Mount the device into the rack using four mounting screws (notincluded).
Place onto a Flat Surface
When placing the device onto a flat surface or stacking it with other equipment, attach the
included rubber feet near the corners on the underside of the device.
Make Connections
The ZUM-HUB4 has a dedicated Control Subnet that is used for communication between the
control system and Crestron Ethernet devices. This subnet allows for dedicated communication
between the control system and Crestron Ethernet devices without interferences from other

Product Manual — Doc. 9094B ZUM-HUB4 • 11
network traffic on the LAN.
Make the connections, and note the following:
lUse Crestron power supplies for Crestron equipment.
lThe included cable(s) cannot be extended.
lApply power after all connections have been made.
NOTES:
lEnsure the unit is properly grounded by connecting the chassis ground lug to an earth
ground (building steel).
lThe ZUM-HUB4 can be powered with the (included) 24VDC power pack.
lDo not connect the CONTROL SUBNET port to the LAN. The CONTROL SUBNET port
must be connected only to Crestron Ethernet devices.
For details on using the Control Subnet, refer to the 4-Series™ Control Systems Reference Guide
(Doc. 8559).
Connections

12 • ZUM-HUB4 Product Manual — Doc. 9094B
Zūm Wired System Diagram
NOTES:
lDaisy-chain up to 20 Zūm Net devices (up to a maximum of 328ft (100m) per leg) with
purple CBL-CAT5E-ZUMNET-P RJ-45 cables (sold separately).
lSystem sensors communicate digitally via Zūm Link. Non-system sensors communicate
via an analog connection on a Zūm Wired J-BOX.

Product Manual — Doc. 9094B ZUM-HUB4 • 13
Configuration
Before using the ZUM-HUB4, ensure it is updated with the latest firmware. Refer to Version
Management (on page55).
Once all of the devices are installed in the space and using the latest firmware, use the Zūm app
to modify default behavior. Expedite commissioning by copying a room configuration and
sending it to an identical room. Save a room configuration template and share it via the
ZUM-HUB4 or the Zūm app.
NOTE: The ZUMLINK-KP Bluetooth® connection is required to configure a Zūm wired space
with the Zūm app.
This section provides the following information:
•Zūm App Configuration
•Log into the Web-Interface
•Web Interface Overview
•Web Interface Configuration
Zūm App Configuration
Download the Zūm app from the Google Play™ online store.
To use the Zūm app:
1. Enable Bluetooth wireless connection on your device to communicate with the Zūm space.
2. Launch the Zūm app and grant the permissions the app requests. The Zūm app displays a
list of available spaces.
Zūm App Main Screen
From the Nearby Rooms screen, tap the room to open the Main screen. The following section
describes the actions available for each area of the Main screen.

14 • ZUM-HUB4 Product Manual — Doc. 9094B

Product Manual — Doc. 9094B ZUM-HUB4 • 15
1. Room Settings: Edit the Room Name, PIN, Floor ID, Zone ID, and Network information.
2. Configuration: Edit the room logic view the current state of the room.
lSensors: View details for the connected sensor(s). Edit sensor name.
lLoad Controllers: Identify and view the details for the connected load controller(s).
oZUMLINK-JBOX-16A-LV and ZUMNET-JBOX-16A-LV load controllers:
nView Current Scene, Daylighting status, Output Level.
nOverride: The state of the load when Override is recalled. Click the
toggle to turn the load on or off during Override.
nAssign the occupancy mode (Occupancy menu), vacancy mode
(Vacancy menu), vicinity mode (Vicinity menu), and daylight harvesting
(Photo menu) to specific load controllers.
nView Dimming Values
nEdit the Dimming Curve Configuration or Dimmer Scenes
Configuration.
oZUMLINK-JBOX-20A-PLUG load controller:
nOverride: The state of the load when Override is recalled. Click the
toggle to turn the load on or off during Override.
nAssign the occupancy mode (Occupancy menu), vacancy mode
(Vacancy menu), vicinity mode (Vicinity menu), and daylight harvesting
(Photo menu) to specific load controllers.
oZUMLINK-JBOX-20A-SW load controller:
nClosed: Click the toggle to turn the load on or off.
nOverride: The state of the load when Override is recalled. Click the
toggle to turn the load on or off during Override.
nAssign the occupancy mode (Occupancy menu), vacancy mode
(Vacancy menu), vicinity mode (Vicinity menu), and daylight harvesting
(Photo menu) to specific load controllers.
nScenes: Allow keypad access to the scene by selecting or deselecting the
checkbox. Determine the state of the load when the scene is recalled by
clicking the toggle on or off.
lScenes: View and edit room scenes: Scene 1 - Scene 16. When editing the scene, tap
the Identify icon to identify the load controller: It emits a sound and flashes the
Link LED. The connected loads also flash.