Crestron APAD User instructions

Crestron
Cutout Dimensions
& Mounting Options

This document was prepared and written by the Marketing department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
All brand names, product names and trademarks are the property of their respective owners.
©2006 Crestron Electronics, Inc

Cutout Dimensions & Mounting Options Crestron
Contents
Cutout Dimensions & Mounting Options 1
Introduction ........................................................................................................................1
Touchpanel Templates...............................................................................................................1
Keypad Templates.....................................................................................................................1
QM Devices, IM Devices, and Other Fliptop/Desk Mounted Devices Templates.....................2
Touchpanel Mounting Kits and Cutout Dimensions ..........................................................3
Back Box...................................................................................................................................3
Pre-Construction Mounting Kit.................................................................................................3
Trim Ring..................................................................................................................................4
Mud Ring...................................................................................................................................4
Rack Mount...............................................................................................................................5
Water Resistant Cover Kits .......................................................................................................6
LC-1000, CT-1000 & APAD.....................................................................................................7
TPMC-10-DSW.........................................................................................................................8
TPS-12L & TPS-12G-QM-L.....................................................................................................9
TPS-15L, TPS-15G-QM-L, TPMC-15-CH-L & TPMC-15-QM-L.........................................10
TPS-17L, TPMC-17-CH-L, & TPMC-17-QM-L ....................................................................11
TPS-2000L ..............................................................................................................................12
TPS-3100L ..............................................................................................................................13
TPS-4000L ..............................................................................................................................14
TPS-4500L, TPS-4500LV & TPS-5000L................................................................................15
TPS-6000L ..............................................................................................................................17
TPS-4L ....................................................................................................................................19
C2N-FT-TPS4 .........................................................................................................................20
STX-1700CW and STX-1700CXPW......................................................................................21
Thermostats, Temperature and Temperature/Humidity Sensors ......................................22
CHV-TSTAT and CHV-THSTAT ..........................................................................................22
CHV-RTS & CHV-RTHS.......................................................................................................23
CHV-RSS................................................................................................................................23
C2N-RTHS..............................................................................................................................24
Keypads............................................................................................................................25
C2N-CBF.................................................................................................................................25
MediaManager Devices....................................................................................................26
QM-FTCC, QM-FTDC, QM-FTMC, QM-FTSC, QM-FTMCSC, QMI-FTCC, QMI-FTDC,
QMI-FTMC, QMI-FTSC& QMI-FTMCSC...........................................................................26
QM-FTCC-TPS4.....................................................................................................................26
IM-FTCC-B.............................................................................................................................27
IM-TCC...................................................................................................................................28
C2N-FTB.................................................................................................................................29
Lighting and Shade/Drape Control...................................................................................30
CAEN Automation Enclosures................................................................................................30
C2N-SDCand C2N-SDC-DC.................................................................................................31
CLS-C6 and CLS-C6M ...........................................................................................................32
Further Inquiries...............................................................................................................33
Cutout Dimensions & Mounting Options – Doc. 4926 Contents •
i

Cutout Dimensions & Mounting Options Crestron
Cutout Dimensions
& Mounting Options
Introduction
This document contains the cutout dimensions and mounting options for the current
line of wall-mounted/lectern-mounted Crestron devices. Templates are available on
the Crestron website and may be ordered as a part number. Refer to the Crestron
website: Tools & Resources > Product Resources > Product Cut-Out Templates.
NOTE: Crestron cannot guarantee the accuracy of template reproduction on your
printer. For precise templates, please order the part number.
Touchpanel Templates
Model Number Template Part Number
TPS-12G-QM-L Template 40079 for WMKM-12L/WMKT-12L
TPS-15G-QM-L Template 40080 for WMKM-15L/WMKT-15L
TPMC-10 Template 40085 for TPMC-10-DSW
TPMC-15-(CH/QM)-L Template 40080 for WMKM-15L/WMKT-15L
TPMC-17-(CH/QM)-L Template 40081 for WMKM-17L/WMKT-17L
TPS-12L Template 40079 for WMKM-12L/WMKT-12L
TPS-15L Template 40080 for WMKM-15L/WMKT-15L
TPS-17L Template 40081 for WMKM-17L/WMKT-17L
TPS-2000L Template 40064-1 for WMKM-2000L
TPS-3100L Template 40065-1 for WMKM-3000L
TPS-4500L
TPS-5000L Template 40049-1 for direct mounting
TPS-6000L Template 40051-1 for direct mounting
TPS-4L Template 40078 for direct mounting
Template 40086 for WMKT-4L
C2N-FT-TPS4 Template 40082
Keypad Templates
Model Number Template Part Number
C2N-CBF Template 40075
Cutout Dimensions & Mounting Options Crestron Doc. 4926A y1

Crestron Cutout Dimensions & Mounting Options
QM Devices, IM Devices, and Other Fliptop/Desk Mounted
Devices Templates
Model Number Template Part Number
QM-FTCC
QM-FTDC
QM-FTMC
QM-FTSC
QM-FTMCSC
C2N-FTB
Template 40071
QMI-FTCC
QMI-FTDC
QMI-FTMC
QMI-FTSC
QMI-FTMCSC
Template 40073
QM-FTCC-TPS4
C2N-FT-TPS4 Template 40082
QMI-FTCC-TPS4 Future
IM-FTCC-B Template 40077
yCrestron Doc. 4926A Cutout Dimensions & Mounting Options
2

Cutout Dimensions & Mounting Options Crestron
Touchpanel Mounting Kits and Cutout Dimensions
Crestron offers a number of optional kits for mounting touchpanels.
Back Box
The Back Box is used
in a pre-construction
environment, before
the drywall is installed.
It attaches to a stud and
provides a very secure
mounting.
Pre-Construction Mounting Kit
The Pre-Construction
Mounting Kit
provides a quick nail-in
solution for installing
wall mount
touchpanels and
permits fastening to the
stud of a framed wall
prior to hanging
drywall.
Cutout Dimensions & Mounting Options Crestron Doc. 4926A y3

Crestron Cutout Dimensions & Mounting Options
Trim Ring
The Trim Ring is an
optional accessory for
use with the pre-
construction wall
mounting kit and back
box to provide a
smooth edge around
the opening and
compensate for minor
drywall cutout
imperfections.
Examples of Post
Construction Wall
Mount Kit with Trim
Ring.
Mud Ring
The Mud Ring is
an optional
accessory used to
compensate for
significant drywall
cutout imperfections
by providing a
suitable surface for
the application of
plaster for a finished
appearance.
Examples of Post
Construction Wall
Mount Kit with
Mud Ring.
yCrestron Doc. 4926A Cutout Dimensions & Mounting Options
4

Cutout Dimensions & Mounting Options Crestron
Rack Mount
The Rack Mount is an optional mounting accessory that allows for the installation of a touchpanel in a 19-inch EIA
equipment rack.
RMK-12L RMK-15L RMK-17L
RMK-3100L RMK-4000L
Model Height Occupied Rack Spaces
RMK-12L 13.97 inches (35.49 cm) Eight rack spaces
RMK-15L 15.72 inches (39.93 cm) Nine rack spaces
RMK-17L 15.72 inches (39.93 cm) Nine rack spaces
RMK-3100L 8.72 inches (22.15 cm) Five rack spaces
RMK-4000L 10.47 inches (26.59 cm) Six rack spaces
Cutout Dimensions & Mounting Options Crestron Doc. 4926A y5

Crestron Cutout Dimensions & Mounting Options
Water Resistant Cover Kits
The Water Resistant Cover Kit protects touchpanels wherever they may be
exposed to moisture or dampness such as basements, pools, boathouses,
bathrooms, laundries and garages. The urethane covers install easily over the
faceplate of the touchpanel. Without hindering normal use, they effectively
prevent liquids and other airborne materials from settling onto the face of the
panel.
CT/LC-WPK Water Resistant Cover for CT-1000 and LC-1000
TPS-WPK Water Resistant Cover for TPS-2000
NOTE: Please note that Crestron touchpanels are not intended to be exposed to the
elements or used under conditions exceeding the environmental limits of 50° to
113°F (10° to 45°C), 10% to 90% RH (non-condensing).
yCrestron Doc. 4926A Cutout Dimensions & Mounting Options
6

Cutout Dimensions & Mounting Options Crestron
LC-1000, CT-1000 & APAD
Pre-Construction Mounting Options for the LC-1000, CT-1000 & APAD Touchpanels
PRE-CONSTRUCTION KITS MODEL NUMBER
Back Box Kit BB-1000L
Pre-Construction Kit PMK-1000L
Mud Mount Kit MMK-1000L
Trim Mount Kit TMK-1000L
Post-Construction Mounting Options for the LC-1000, CT-1000 & APAD Touchpanels
POST-CONSTRUCTION KITS MODEL NUMBER
Wall Mount Mud Kit WMKM-1000L
Wall Mount Trim Kit WMKT-1000L
Water Resistant Cover CT/CL-WPK
NOTE: Early production units ship with two mounting brackets (and other parts)
that allowed the low-voltage touchpanel to be installed directly into a mounting
surface.
Cutout for Trim Ring Mount Kits:
TMK-1000L & WMKT-1000L Back Box Dimensions for BB-1000L
NOTE: For additional mounting information, refer to the latest version of the
Crestron Touchpanel Mounting Quick Start, Doc. 6140, available from the Crestron
website (www.crestron.com).
Cutout Dimensions & Mounting Options Crestron Doc. 4926A y7

Crestron Cutout Dimensions & Mounting Options
TPMC-10-DSW
The TPMC-10-DSW is a wall-mounted docking station for the Crestron®TPMC-10
Isys i/O™ WiFi Touchpanel. The TPMC-10-DSW, recessed in the wall, turns the
TPMC-10 into a fully-functioning wall mounted touchpanel, and charges its built-in
battery at the same time.
Cutout for TPMC-10-DSW
NOTE: For additional details, refer to the latest version of the TPMC-10-DSW
Operations and Installation Guide (Doc. 6400), available from the Crestron website.
yCrestron Doc. 4926A Cutout Dimensions & Mounting Options
8

Cutout Dimensions & Mounting Options Crestron
TPS-12L & TPS-12G-QM-L
Pre-Construction Mounting Options for the TPS-12L & TPS-12G-QM-L Touchpanels
PRE-CONSTRUCTION KITS MODEL NUMBER
Back Box Kit BB-12L
Pre-Construction Kit PMK-12L
Mud Mount Kit MMK-12L
Trim Mount Kit TMK-12L
Post-Construction Mounting Options for the TPS-12L & TPS-12G-QM-L Touchpanels
POST-CONSTRUCTION KITS MODEL NUMBER
Wall Mount Mud Kit WMKM-12L
Wall/Lectern Mount Trim Kit WMKT-12L
Rack-Mount Kit RMK-12L
TPS-12L & TPS-12G-QM-L Cutout Dimensions
Back Box BB-12L Dimensions
Cutout Dimensions & Mounting Options Crestron Doc. 4926A y9

Crestron Cutout Dimensions & Mounting Options
TPS-15L, TPS-15G-QM-L, TPMC-15-CH-L & TPMC-15-QM-L
Pre-Construction Mounting Options for the TPS-15 and TPS-15G-QM-L Touchpanels
PRE-CONSTRUCTION KITS MODEL NUMBER
Back Box Kit BB-15L
Pre-Construction Kit PMK-15L
Mud Mount Kit MMK-15L
Trim Mount Kit TMK-15L
Post-Construction Mounting Options for the TPS-15 and TPS-15G-QM-L Touchpanels
POST-CONSTRUCTION KITS MODEL NUMBER
Wall/Lectern Mount Trim Kit WMKT-15L
Wall Mount Kit with Mud Ring WMKM-15L
Rack-Mount Kit RMK-15L
TPS-15L, TPS-15G-QM-L, TPMC-15-CH-L & TPMC-15-QM-L Cutout Dimensions
Back Box BB-15L Dimensions
yCrestron Doc. 4926A Cutout Dimensions & Mounting Options
10

Cutout Dimensions & Mounting Options Crestron
TPS-17L, TPMC-17-CH-L, & TPMC-17-QM-L
Pre-Construction Mounting Options for the TPS-17L Touchpanels
PRE-CONSTRUCTION KITS MODEL NUMBER
Back Box Kit BB-17L
Pre-Construction Kit PMK-17L
Mud Mount Kit MMK-17L
Trim Mount Kit TMK-17L
Post-Construction Mounting Options for the TPS-17L Touchpanels
POST-CONSTRUCTION KITS MODEL NUMBER
Wall/Lectern Mount Trim Kit WMKT-17L
Rack-Mount Kit RMK-17L
TPS-17L, TPMC-17-CH-L, & TPMC-17-QM-L Cutout Dimensions
Back Box BB-17L Dimensions
Cutout Dimensions & Mounting Options Crestron Doc. 4926A y
11

Crestron Cutout Dimensions & Mounting Options
TPS-2000L
Pre-Construction Mounting Options for the TPS-2000L Touchpanels
PRE-CONSTRUCTION KITS MODEL NUMBER
Back Box Kit BB-2000L
Pre-Construction Kit PMK-2000L
Mud Mount Kit MMK-2000L
Trim Mount Kit TMK-2000L
Post-Construction Mounting Options for the TPS-2000L Touchpanels
POST-CONSTRUCTION KITS MODEL NUMBER
Wall Mount Mud Kit WMKM-2000L
Wall Mount Trim Kit WMKT-2000L
Water Resistant Cover TPS-WPK
TPS-2000L Cutout Dimensions
NOTE: For additional TPS-2000L mounting information, refer to the latest version
of the Crestron Touchpanel Mounting Quick Start, Doc. 6140, available from the
Crestron website (www.crestron.com).
Back Box BB-2000L and Mounting Plate Dimensions
yCrestron Doc. 4926A Cutout Dimensions & Mounting Options
12

Cutout Dimensions & Mounting Options Crestron
TPS-3100L
Pre-Construction Mounting Options for the TPS-3100L Touchpanels
PRE-CONSTRUCTION KITS MODEL NUMBER
Back Box Kit BB-3100L
Pre-Construction Kit PMK-3100L
Mud Ring Only MMK-3100L
Trim Ring Only TMK-3100L
Post-Construction Mounting Options for the TPS-3100L Touchpanels
POST-CONSTRUCTION KITS MODEL NUMBER
Wall/Lectern Mount Kit with Trim Ring WMKT-3100L
Wall Mount Kit with Mud Ring WMKM-3100L
Architectural Faceplates TPS-FPAR3100L
Rack Mount Kit RMK-3100L
TPS-3100 Cutout Dimensions Back Box BB-3100L Dimensions
WARNING: The TPS-3100L is physically different from the discontinued
TPS-3000L and the mounting options and cutout dimensions are not interchangeable.
NOTE: For additional TPS-3100 mounting information, refer to the latest version of
the Crestron Touchpanel Mounting Quick Start, Doc. 6140, available from the
Crestron website (www.crestron.com).
Cutout Dimensions & Mounting Options Crestron Doc. 4926A y
13

Crestron Cutout Dimensions & Mounting Options
TPS-4000L
Pre-Construction Mounting Options for the TPS-4000L Touchpanels
PRE-CONSTRUCTION KITS MODEL NUMBER
Back Box Kit BB-4000L
Pre-Construction Kit PMK-4000L
Mud Ring Only MMK-4000L
Trim Ring Only TMK-4000L
Post-Construction Mounting Options for the TPS-4000L Touchpanels
POST-CONSTRUCTION KITS MODEL NUMBER
Wall/Lectern Mount Kit with Trim Ring WMKT-4000L
Wall Mount Kit with Mud Ring WMKM-4000L
Architectural Faceplates TPS-FPAR4000L
Rack Mount Kit RMK-4000L
TPS-4000L Cutout Dimensions
NOTE: For additional TPS-4000L mounting information, refer to the latest version
of the Crestron Touchpanel Mounting Quick Start, Doc. 6140, available from the
Crestron website (www.crestron.com).
Back Box BB-4000L Dimensions
yCrestron Doc. 4926A Cutout Dimensions & Mounting Options
14

Cutout Dimensions & Mounting Options Crestron
TPS-4500L, TPS-4500LV & TPS-5000L
Pre-Construction Mounting Options for the TPS-4500L, TPS-4500LV, & TPS-5000L
Touchpanels
PRE-CONSTRUCTION KITS MODEL NUMBER
Back Box Kit BB-5000L
Post-Construction Mounting Options for the TPS-4500L, TPS-4500LV, & TPS-5000L
Touchpanels
POST-CONSTRUCTION KITS MODEL NUMBER
Architectural Faceplates TPS-FPAR5000L
Rack Mount Kit RMK-5000L
TPS-4500L, TPS-4500LV & TPS-5000L Cutout Dimensions
HORIZONTAL MEASUREMENTS VERTICAL MEASUREMENTS RADIUS MEASUREMENTS
H1 =12.920 in (32.817 cm) V1 =10.223 in (25.966 cm) R1 =0.161 in (0.409 cm) typical
H2 =1.056 in (2.682 cm) V2 =10.043 in (25.509 cm) R2 =0.312 in (0.792 cm) typical
H3 =10.951 in (27.816 cm) V3 =9.866 in (25.060 cm)
H4 =2.054 in (5.217 cm) V4 =0.179 in (0.455 cm)
H5 =8.953 in (22.741 cm) V5 =0.089 in (0.226 cm)
H6 =4.305 in (10.935 cm)
H7 =4.452 in (11.308 cm)
H8 =5.282 in (13.416 cm)
H9 =2.500 in (6.350 cm)
Cutout Dimensions & Mounting Options Crestron Doc. 4926A y
15

Crestron Cutout Dimensions & Mounting Options
Back Box BB-5000 Dimensions
yCrestron Doc. 4926A Cutout Dimensions & Mounting Options
16