Crosley CF3029 User manual

Back Slat Hanging Bar
Adjustable Shelf
Partition Panel

3

4
Please do not use tools to assemble this unit unless specifically indicated.
Step 1. Attach handle (part #11) to drawer front panel (part J) using round head bolts
(part #4) and phillips head screwdriver. Insert drawer left panel (part K) and
drawer right panel (part L) into drawer front panel (part J) pull down to lock.
Slide drawer bottom panel (part N) into grooves of assembled unit (parts J,
K & L). Attach drawer back panel (part M) to assembled unit (parts K, L & N)
using screws (part #3) and phillips head screwdriver. Repeat for remaining
drawer.

5
Step 2. Attach door magnets (part #10) to front rail (part P) using round head screws
(part #1) and phillips head screwdriver.
Step 3. Attach towel bar (part #13) to left frame (part B) using bolts (part #5) and allen
wrench (part #16).

6
Step 4. Attach hinges (part #12) to left door (part H) using short screws (part #2) and
phillips head screwdriver.
Step 5. Attach hinges (part #12) to right door (part I) using short screws (part #2) and
phillips head screwdriver.

7
Step 6. Attach right frame (part C) to bottom panel (part D) using wood dowels
(part #8), long bolts (part #6), barrel nuts (part #7), allen wrench (part #16)
and phillips head screwdriver.
Step 7. Attach front rail (part P) to right frame (part C) and lock the hardware.

8
Step 8. Insert partition panel (part E) to assembled unit (parts D & P) and lock the
hardware.
Step 9. Attach back slat (part Q) to bottom panel (part D) using wood dowel (part #8).

9
Step 10. Slide back panels (part F) into grooves of assembled unit (parts C, D & Q).
Step 11. Attach back rail (part O) to assembled unit (parts C & Q) using wood dowel
(part #8) and lock the hardware.

10
Step 12. Attach left frame (part B) to assembled unit (parts D, O & P) using wood
dowels (part #8), long bolts (part #6), barrel nuts (part #7), allen wrench
(part #16), phillips head screwdriver and lock the hardware.
Step 13. Attach locking casters (part #14) and casters (part #15) to frames
(parts B & C) using wrench (part #17).

11
Step 14. Carefully turn unit upright. Attach top panel (part A) to assembled unit
(parts B, C & E) and lock the hardware.
Step 15. Slide assembled drawers into place. Put hanging bar (part R) into notch
of right frame (part C).

12
Step 16. Place shelf holders (part #9) into desired position and then slide adjustable
shelves (part G) into place.
Step 17. Attach doors (parts H & I) to frames (parts B & C) using short screws
(part #2) and phillips head screwdriver. Attach handles (part #11) to
doors (parts H & I) using round head bolts (part #4) and phillips head
screwdriver.