Crosley CF6026 User manual

Adjustable Shelf

3
Hook

4
Please do not use tools to assemble this unit unless specifically indicated.
Step 1. Attach handle (part #10) to drawer front panel (part J) using short screws
(part #1) and phillips head screwdriver. Attach drawer left panel (part K) and
drawer right panel (part L) to drawer back panel (part M) using wood dowels
(part #7), long screws (part #4) and phillips head screwdriver. Slide drawer
bottom panel (part N) into grooves of assembled unit (parts K, L & M).
Attach drawer front panel (part J) to drawer panels (parts K & L) using wood
dowels (part #7) and lock the hardware.

5
Step 2. Attach hooks (part #9) to hook slat (part I) using screws (part #3) and phillips
head screwdriver.
Step 3. Attach hinges (part #12) and knobs (part #11) to doors (part H) using screws
(part #3), round head bolts (part #5) and phillips head screwdriver.

6
Step 4. Attach top panel (part A), fixed shelves (part E), hook slat (part I) and bottom
panel (part D) to left panel (part B) and right panel (part C) using wood dowels
(part #7) and lock the hardware.
Step 5. Attach top rail (part O) and bottom rail (part P) to top panel (part A) and bottom
panel (part D) using bolts (part #6) and allen wrench (part #13).

7
#3
#3
#3#3
#3
#3
#3#3 #3
#3 #3
#3
Step 6. Carefully turn unit upright. Attach back panel (part F) to assembled unit
(parts A, B, C, D, E & I) using round head screws (part #2) and phillips
head screwdriver.
Step 7. Attach hinges to left panel (part B) and right panel (part C) using screws
(part #3) and phillips head screwdriver.

8
Step 8. Place shelf holders (part #8) into desired position and then slide adjustable
shelves (part G) into place.
Step 9. Slide assembled drawer into place.
NOTE: It is important to adjust levelers once fully assembled and upright.
Extend adjustable leveler until it's firmly in contact with the floor. If relocating,
adjust leveler as needed until it's firmly in contact with the floor in new location.
Important: Safety strap kit (part #14) must be installed to prevent tipping,
damage and/or injury.

#14
Wall Anchor Short ScrewWasher D8*3/4" Safety Wall Strap
Long Screw
D8*1-1/2"
9