Crosley CF4202 User manual

D8pcs
E8pcs

L
Insert CamBolts(B)intopre-drilled holesof parts1,3,4,6,7using aPhillipshead screw driveras
shown. Do not overtighten.
AttachHandle Washers(H)and Handles(G)toDoors(15 &16)using Short HexSocket Head
Bolts(E) andAllenKey(F).
AttachMagnets(K)toFront Rail (11)using Round Head Screws(L)asshown.
Insert Right Wine HolderShelf (14)toLeft HolderShelf (13)asshown.

AttachHandle Washers(H)and Handles(G)toDrawerFront Panel (17)using Short HexSocket
HeadBolts(E)andAllenKey(F).
AttachDrawerBack Panel (20)toDrawerSide Panels(18 &19)using Short Flat Head Screws(I).
NOTE:besure thatdrawer slidejointare facing outward .
Slide DrawerBottomPanel (21)intogroovesof DrawerSide Panels(18 &19). AttachDrawer
Front Panel (17)toDrawerSide Panels(18 &19)using Short Flat Head Screws(I).
Repeat forsecond drawer.
AttachPartition Panels(6&7)toFixed Shelf(8)using Wood Dowels(C)and CamLocks (A)
asshown.

AttachFront Rail (11)and Back Rail (12)toassembled parts(6,7&8)using Wood Dowels(C)
LongHexSocketHeadBolts(D)andAllenKey(F)asshown.
AttachUpperPartition Panel (5)toRails(11&12)using Wood Dowels(C)and Long Flat Head
Screws(J)asshown.
7
7

24
2
3
4
24
Turnassembled parts(6,7,8,11&12)withthe side facedown.AttachBottomPanel (2)using
Wood Dowels(C). AttachCenterSupport Legs(24)byturning clockwiseintothe pre-drilled
holesasshown.
Note:Theadjustableleveler on thebottomoftheCenter SupportLegs(24)should notbe
extended until after installation .Adjusttheleveler on thebottomoftheCenter Support
Legs(24)until itfitstightlyagainstthefloor.Use ofthesupportleg isimportantto
supportthecenter ofthecabinet.
AttachLeft Side Panel (3)and Right Side Panel (4)using Wood Dowels(C)and CamLocks (A)
asshown.
7
12

Carefullyturncabinet over.AttachTop Panel (1)using Wood Dowels(C), CamLocks (A), Long
FlatHeadBolts(D)andAllenKey(F)asshown.
AttachDoors(15 &16)tocabinet byplacing bottomPin Hinge intopre-drilled holesin Base
(2)&depressing top spring loaded pin hinge tofit the doorintoplacein Rail (11).
Note-Be sure Pin Hinges (top &bottom)have fullyextended into thepre-drilled holes
in Base (2)and Rail (11)tosecure doors into place .
F
16
2
11

22
23
22
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
Insert drawersintocabinet asshown.
AttachBackPanels(22&23)tocabinetusingRoundHeadScrews(L)asshown.
Left drawerhasabrand init .

9
10
M
MM
Insert assembled wine holdershelf intocabinet asshown.
Insert the Shelf Holders(M) intodesired position.Insert Adjustable shelf (9&10)intocabinet.

A
B
C
D
B
2)Drilla11/32"holewhereyouwanttosecure
yourpantry.Theholeshouldbeatthe same
heightastheholeinTopPanel(1). Tap Wall
AnchorPart(A)intothehole.
E
1)InsertShortScrewPart(C)through Washer
Part(B)andSafetyWallStrapPart(E)and
screwitintoTopPanel(1).
3)InsertLongScrewPart(D)through aWasher
Part(B)andWallSafetyStrapPart(E)into
WallAnchorPart(A).
Wall
LONGSCREW
Dx1PC
SAFETYWALLSTRAP
Ex1PC
SHORTSCREW
Cx1PC
WALLANCHOR
Ax1PC
WASHER
Bx2PCS
SAFETYSTRAPKIT
1PC
SAFETYWALL STRAPASSEMBLY
INSTRUCTION
AB C DE
D8*3/4" D8*1-1/2"
N