Crosley CF6028 User manual

1 PC 1 PC
Back Panel
1 PC1 PC 1 PC
Hook

Step 1. Attach hooks (part #6) to back panel (part E) using short screws (part #1) and
phillips head screwdriver.
Step 2. Attach top panel (part A) to back panel (part E) using wood dowels (part #5),
screws (part #2) and phillips head screwdriver.

Wall
Step 3. Attach left panel (part B) and right panel (part C) to assembled unit
(parts A & E) using wood dowels (part #5), screws (part #2) and phillips head
screwdriver.
Step 4. Hold hanger rod (part D) in the desired location of shelf. The hanger rod
(part D) will be about 2" lower than the top of shelf. Level hanger rod (part D)
using a leveler to make sure it's oriented correctly. Use a pencil to mark wall
anchors location using hanger rod (part D) screw holes as a guide. Drill three
11/32" holes in these marked spots and tap wall anchors (part #3) into the
drilled holes. Secure hanger rod (part D) to wall anchors (part #3) using long
screws (part #4) and phillips head screwdriver.

Wall
Step 5. Mount shelf by hooking back panel (part E) onto hanger rod (part D).