Crosley CO7140 User manual

Outdoor Wicker Arm Chair
CO7140

2
PART LIST
A B CD
F
Arm
2 PCS
Panel Back Panel
1 PC
Seat Panel
1 PC
HARDWARE LIST
#1 #2 #3 #4 #5
Bolt
16PCS
Nut
16 PCS
Washer
32 PCS
Wrench
1 PC
Allen Key
1 PC
M6*50mm
EXTRA HARDWARE LIST
M6mm D18mm M6mm M6mm
Bolt
1 PC
Nut
1 PC
Washer
1 PC
M6*50mm M6mm D18mm
Cover of Seat
Cushion *
1 PC
Core of Seat
Cushion
1 PC
Cover of Back
Cushion *
1 PC
Core of Back
Cushion
1 PC
G
#1 #2 #3
*Please note cushion covers will
ship separately.
E

3
#1 x3
#3 x6
#2
#4 x1
x3
#5 x1
Step 1.
Attach arm panel (part A) to back panel (part B) using bolts(part #1),washers (part #3),
nuts (part #2),wrench(part #4) and allen key (part #5).
NOTE:Please do not fully tighten bolts until unit is fully assembled.
Lay back panel (part B) down on a .soft flat surface, such as carpet, as shown below.
Step 2.
(part #3),nuts (part #2),wrench (part #4) and allen key (part #5).
NOTE:Please do not fully tighten bolts until unit is fully assembled.
Attach seat panel (part C) to assembled unit (parts A&B) using bolts (part #1),washers
A
B
#4 #2 #3 #3 #1 #5
#1 x6
#3 x12
#2
#4 x1
x6
#5 x1
#5
#3
#1
#3
#2
#4
AC
B

4
Step 3.
(part #3),nuts (part #2),wrench (part #4) and allen key (part #5).
NOTE: Please fully tighten all bolts at this time.
Attach arm panel (part A) to assembled unit (parts C&B) using bolts (part #1),washers
#1 x7
#3 x14
#2
#4 x1
x7
#5 x1
#1
#5 #3 #3 #2 #4
A
B
CA
E
GF
Step 4.Insert core of seat cushion ( ) into cover of seat cushion ( D).
lnsert core of back cushion (part G) into cover of back cushion (part F).
part E part
D

5
Step 6.Carefully turn the assembled chair upright and add cushions as shown below.