Crosley CO7141 User manual

Outdoor Wicker Armless Chair
CO7141

2
PART LIST
A B CF
Back
1 PC
Panel Seat Panel
1 PC
Side Panel
1 PC
HARDWARE LIST
#1 #2 #3 #4 #5
#6 #7
Short Bolt
3 PCS
Medium Bolt
4 PCS
Long Bolt
6 PCS
Nut Washer
15 PCS
Wrench
1 PC
Allen Key
1 PC
M6*30mm M6*35mm M6*50mm M6mm D18 m m
M6mm M6mm
E
#8
Cover of Seat
Cushion *
1 PC
Core of Seat
Cushion
1 PC
Cover of Back
Cushion *
1 PC
Core of Back
Cushion
1 PC
GH
*Please note cushion covers will
ship separately.
Small Washer
4 PCS
D12mm
2 PCS
#9 #10
Plastic Clip
2 PCS
10 PCS

4
#3 x4
#5 x8
#4
#7 x1
x4
#8 x1
#5 x7
#4
#7 x1
x2
#8 x1
#3 x2
Step 1.
Attach seat panel (part B) to back panel (part A) using long bolts(part #3),washers
(part #5),nuts (part #4),wrench(part #7) and allen key (part #8).
NOTE:Please do not fully tighten bolts until unit is fully assembled.
Lay back panel (part A) down on a .soft flat surface, such as carpet, as shown below
Step 2.
long bolts (part #3) ,washers (part #5) ,nuts (part #4),wrench (part #7) and allen key
(part #8).
NOTE:Please do not fully tighten bolts until unit is fully assembled.
Attach side panel (part C) to assembled unit (parts A&B) using short bolts (part #1)
A
B
#8
#5
#3
#5
#4
#7
A
B
C
#8
#5
#3
#5
#4
#7
#5
#1
#8
#1 x3

5
Step 3.
small washers (part #6),nuts (part #4),wrench (part #7) and allen key (part #8).
Attach L feet (part #9) to assembled unit (parts B&C) using medium bolts (part #2),
#2 x4
#4
#7 x1
x4
#8 x1
#9 x2
#6 x4
#2
#6
#7
#8
#9
FE
HG
Step 4.Insert core of seat cushion ( ) into cover of seat cushion ( E).
lnsert core of back cushion (part H) into cover of back cushion (part G).
part F part
#4
A
B
C

6
Step 5.Carefully turn the assembled chair upright and add cushions as shown below.
Step 6.Use plastic clips (part #10) to secure additional units together as shown.
#10