Crosley Richland CO7318 User manual

Outdoor Wicker Arm Chair
CO7318

Seat Cushion
2 PCS
Back Cushion
2 PCS
FG
14 PCS (Extra 1)
M6*30mm
Long Bolt
HARDWARE LIST
Short Bolt
24 PCS (Extra 1)
M6*15mm M6mm
1 PC
Allen Wrench
M6mm
Flat Washer
38 PCS (Extra 1)
#1 #2 #3 #4
PART LIST
E
ABC D
2 PCS
Right Arm Panel
2 PCS 2 PCS 8 PCS
Seat Panel Leg
Back Panel
2 PCS
Left Arm Panel
2

A
D
3
NOTE: Please do not fully tighten bolts until unit is fully assembled.
NOTE: Please do not fully tighten bolts until unit is fully assembled.
Step 1. Lay right arm panel (part A) upside down on a soft flat surface, such as carpet, as shown below.
Attach back panel (part D) to right arm panel (part A) using long bolt (part #2), flat washer
(part #3) and allen wrench (part #4).
A
D
#4
#2
#3
x1
#2
x1
#3
x1
#4
Step 2. Attach seat panel (part C) to right arm panel (part A) and back panel (part D) using long
bolts (part #2), flat washers (part #3) and allen wrench (part #4).
C
#4
#2
#3
x3
x3
#3
x1
#4
#2

D
C
Step 4. Carefully turn assembled unit upside down. Attach legs (part E) to assembled unit
D
C
A
B
4
NOTE: Please fully tighten all bolts at this time.
NOTE: Please do not fully tighten bolts until unit is fully assembled.
#4
#3
Step 3. Attach left arm panel (part B) to back panel (part D) and seat panel (part C) using long
bolts (part #2), flat washers (part #3) and allen wrench (part #4).
B
x3
#2
x3
#3
x1
#4
(parts A, B & D) using short bolts (part #1), flat washers (part #3) and allen wrench (part #4).
#4
#1
#3
E
E
E
E
x12
#1
x12
#3
x1
#4
#2

Step 5. Carefully turn unit upright. Add seat cushion (part F) and back cushion (part G) as shown below.
F
G
5
Repeat steps 1-5 to assemble remaining chair.