Crosley CO7142 User manual

Outdoor Wicker Corner Chair
CO7142

2
PART LIST
A B CD
FGH
Arm
1 PC
Panel Back
1 PC
Panel Seat Panel
1 PC
Cover of Seat
Cushion *
1 PC
HARDWARE LIST
#1 #2 #3 #4 #5
Bolt
11 PCS
Nut
11 PCS
Washer
22 PCS
Wrench
1 PC
Allen Key
1 PC
M6*50mm
EXTRA HARDWARE LIST
M6mm D18mm M6mm
M6mm
E
Bolt
1 PC
Nut
1 PC
Washer
1 PC
M6*50mm M6mm D18mm
I
Core of Seat
Cushion
1 PC
Cover of Side
Cushion *
1 PC
Core of Side
Cushion
1 PC
#1 #2 #3
Cover of Back
Cushion *
1 PC
Core of Back
Cushion
1 PC
*Please note cushion covers will ship separately.
DE
#6
Plastic Clip
2 PCS

3
#1 x3
#3 x6
#2
#5 x1
x3
#6 x1
#1 x8
#3 x16
#2
#5 x1
x8
#6 x1
Step 1.
Attach arm panel (part A) to back panel (part B) using bolts(part #1),washers (part #3)
nuts(part #2),wrench(part #5) and allen key (part #6).
NOTE:Please do not fully tighten bolts until unit is fully assembled.
Lay back panel (part B) down on a .soft flat surface, such as carpet, as shown below
Step 2.
(part #3) ,nuts (part #2),wrench (part #5) and allen key (part #6).
NOTE:Please fully tighten all bolts at this time.
Attach seat panel (part C) to assembled unit (parts A&B) using bolts (part #1),washers
#1 #6
#3
#3
#2
#5
#6
#3
#1
#3
#2
#5
#5
#2
#3
#3#1#6
A
B
A
B
C

4
Step 3.Insert core of seat cushion ( ) into cover of seat cushion ( D).
Insert core of back cushion (part G) into cover of back cushion (part F).
lnsert core of side cushion (part I) into cover of side cushion (part H).
part E part
G
D
E
F
IH
Step 4.Carefully turn the assembled chair upright and add cushions as shown below.

5
Step 6.Use plastic clips (part #4) to secure additional units together as shown.
#4