Crosley CO7270 User manual

15 PCS (Extra1) 30 PCS (Extra2) 15 PCS (Extra1) 1 PC 1 PC
1 PC1 PC
1 PC 1 PC 1 PC 1 PC 1 PC
Left Panel Right Panel Top Panel Bottom Panel Seat Cushion
Head Pillow Strap
Allen Wrench WrenchBolt Nut Flat Washer

below. Attach left panel (part A) and right panel (part B) using bolts (part #1), flat washers
(part #3), nuts (part #2), allen wrench (part #4) and wrench (part #5).
Attach bottom panel (part D) to panels (parts A & B) using bolts (part #1), flat
washers (part #3), nuts (part #2), allen wrench (part #4) and wrench (part #5).
Step 1. Lay panels (parts A & B) upside down on a soft flat surface, such as carpet, as shown
NOTE: Please do not fully tighten bolts until unit is fully assembled.
NOTE: Please do not fully tighten bolts until unit is fully assembled.
#4
#4
#4
#4

Attach top panel (part C) to panels (parts A & B) using bolts (part #1), flat washers
(part #3), nuts (part #2), allen wrench (part #4) and wrench (part #5).
Step 4. Carefully hang chair to the stand.
C
NOTE: Please fully tighten all bolts at this time.
(Not Included)

Step 5. Connect chair and stand using strap (part G).
Step 6. Place seat cushion (part E) and head pillow (part F) as shown below.
G
F
E
(Not Included)
(Not Included)
5