Croydex DG400341 User manual

Please follow these fixing and care instructions to ensure that your product is
fitted safely and that it retains its high quality finish. Please retain this leaflet for
future reference.
This instruction leaflet applies to the following products;
DG400341 - Standard Bath Plug Converta
DG400441 - Standard Basin Plug Converta
Fixing Pack/Contents
A. Converta Plug x1
B. Round Base
C. Rubber Ring
D. Securing Clip x3
A.
B.
C.
S&H 062 R01
D.
Standard Bath Converta
Grey
Black
Round Base Colour Small Ring Medium Ring Large Ring
Blue Grey
Black WhiteGreen
Standard Basin Converta
Black
Grey
Round Base Colour Small Ring Medium Ring Large Ring
Blue Black
Blue BlackGreen
Green
1. Before starting the installation, use the tables below and choose the most secure combination of Round
Base and Rubber Ring to fit your waste. The ideal combination will be to create a tight fit inside the waste
and to be flush with the surface of the waste.
Not Required

2. Once you have selected
the most suitable
combination of Round Base
and Rubber Ring using the
table in Step 1, place the
Round Base into the waste
and align at least one of the
ribs to match up with a rung
on the waste.
In Fig 2a you can see an
example of the alignment
which is required. Once the
rungs are aligned push on a
Securing Clip to lock the
Round Base in position.
2
33. Fully screw the Converta Plug
onto the Round Base. Click the plug
a few times to test if the spring is
working. Then fill up your basin or
bath and test if the plug is working
effectively.
Note
If the plug doesn’t seal you may
have to try a different Rubber Ring
or alternatively you can unscrew
the plug slightly.
For details of the other items in the Croydex range please
visit our website: www.croydex.com
Croydex, Central Way, Andover, Hampshire,
SP10 5AW, UK
Tel: [phone] Fax: [phone]
E-mail: [email protected]
S&H 062 R01
2a