Croydex Flexi-Fix User manual

Flexi-Fix Screw fixing option
• Unique ‘X’ plate can be screwed to walls using the same fixing
points left by most old accessories, no drilling required
•Old fittings can be replaced easily
• X’ plate can be easily aligned with new and old fixing points
• No accurate drilling required
• Screws and fittings included
•Suits 90% of all competitor hole spacings
Align flexi-fix wall plate to
existing fixing points rotating
as necessary. Fix in place
using the screws provided.
Fix accessory in place with
concealed grub screw using
the allen key provided.
Remove old accessory
exposing existing fixing
points.
1. 2. 3.

Flexi-Fix Glue fixing option
• Unique ‘X’ plate can be glued securely to uneven and shiny tiles or walls
•No drilling required
• Glue included
• Self-adhesive locator holds ‘X’ plate in place while glue hardens
• Glue can easily be removed in the future
At the back of the
accessory, peel
protective film from
self-adhesive
alignment guide and
position accessory in
the desired location.
Remove the
accessory leaving the
alignment guide
positioned on the wall.
Apply flexi-fix
adhesive to the wall
plate.
Place wall plate over
the alignment guide
and secure in place
with locking cam.
Allow adhesive to set.
Fix accessory in place
with concealed grub
screw, using the allen
key provided.
1. 2. 3. 4. 5.