Croydex QM770341 User manual

Please follow the xing and care instructions to ensure that your wire storage product is tted
safely and that it retains its high quality nish. Please retain this leaet for future reference.
This installation guide applies to the following products:
QM770341 Aluminium Wire Large Basket
QM770541 Aluminium Wire Large Curved Basket
QM770641 Aluminium Wire Cosmetic Basket
QM775941 Aluminium Wire Corner Basket
QM770841 Aluminium Wire Large 2 Tier Basket
QM773841 Aluminium Wire Large 2 Tier Curved Basket
QM772841 Aluminium Wire Large 2 Tier Corner Basket
Home Safety Advice
• Do not strike the product with hard or sharp objects.
• Always take care when using an electric drill, particularly in the bathroom. Always check for
hidden cables and pipe work before drilling and take extreme care if there is any water in the
working area.
• It is advisable to use a residual current circuit breaker (RCCB).
• Always wear suitable eye protection when drilling.
• If the product is to be tted on a ceramic tiled wall, a ceramic drill bit should be used. Always
ensure that the drill hole passes through the central tiled area rather than through the grouted
area. To prevent unnecessary damage to the tile, mask the area around the hole with tape
before drilling.
Product Care
• To retain the best quality nish, clean product with a soft cloth and a mild soap solution.
• Do not use abrasive or chemical cleaners as they may damage the surface nish on the
surface of the storage baskets.
Fixing Pack Contents
• 2(4) x Wall Fixing Screws
• 2(4) x Wall Plugs
• 2(4) x Decorative Screw Caps
• 2(4) x Threaded Bushes
Tools Required
Drill; 6mm masonry drill bit (6mm ceramic drill bit optional); Cross head screwdriver; Pencil; Spirit
level. KEEP DIY TOOLS OUT OF THE REACH OF CHILDREN
1WMA 084 R01
Premium Aluminium Wire Storage Baskets

Fitting Instructions
1. Select position of the product on the wall and mark through the xing holes, ensuring that
the product is level.
2. Remove the product. Using a 6mm masonry drill, drill the holes in the marked positions to
a depth of 30mm. If drilling through tiles, please pre-drill using a ceramic drill bit.
3. Insert the wall plugs to the surface of the wall. If tting to a tiled surface, the wall plugs should
be inserted below the surface of the tile to avoid cracking.
4. Insert the screws through the threaded bushes and the basket and screw into the wall plug(s).
Do not over tighten as cracking of the tiles could occur - See Fig.1.
5. Thread the decorative caps onto the bushes to complete the assembly - See Fig.1.
2WMA 084 R01
Lifetime Rust Free Guarantee
This guarantee covers rusting under normal usage, when the product is installed, used and cleaned in accordance
with these instructions. This guarantee does not cover rusting resulting from damage to the surface nish due to
the use of abrasive sponges or pads, abrasive cleaners, strong chemical cleaners or metal polish. In the unlikely
event that rusting should occur during the guarantee period we will replace the product or the affected parts.
Please retain a copy of your receipt, as proof of purchase will be required should a guarantee claim be necessary.
For details of the other items in the Croydex range please visit our website: www.croydex.com
Croydex Limited, Central Way, Andover, Hampshire, SP10 5AW, UK
Tel: [phone] Fax: [phone]
E-mail: [email protected]
Fig.1