Croydex MONTANA User manual

DESCRIPTION
MONTANA
DOUBLE SWIVEL DOOR WOOD CABINET
40 Minutes
APPROXIMATE ASSEMBLY TIME
TOOLS REQUIRED
Drill; 6mm masonry drill bit (6mm ceramic drill bit optional); Cross head screwdriver;
Pencil; Spirit level; Tape measure.
2 PERSON ASSEMBLY
CAB 044 R08 PAGE 1 OF 8
ASSEMBLED DIMENSIONS
140MM
500MM
540MM
FLOOR AREA
1.0M X 1.2M
REQUIRED ASSEMBLY SPACE

DESCRIPTION
MONTANA
DOUBLE SWIVEL DOOR WOOD CABINET
PARTS LIST
NO PARTS LIST QTY
(1) TOP PANEL 1
(2) BOTTOM PANEL 1
(3) LEFT SIDE PANEL 1
(4) RIGHT SIDE PANEL 1
(5) BACK PANEL 1
(6) GLASS SHELF 1
(7) LEFT DOOR 1
(8) RIGHT DOOR 1
(9) TRIANGULAR MOUNTS 4
CAB 044 R08 PAGE 2 OF 8
HARDWARE LIST
A
G
B
H
C
I
D
J
E F
FIXING SCREW
DOOR HINGE WALL FIXING
SCREW
FIXING SCREW
WASHER
WALL PLUG
SHELF
SUPPORT
HINGE FIXING
SCREW
WOOD DOWEL COVER CAP GLUE
x8
x4
x4 x8 x1
x16 x4 x4
x4 x4
3
1
82
4
5
6
7
9

Please follow the xing and care instructions to ensure your cabinet is tted safely and
retains its high quality nish. Please retain this leaet for future reference.
Home Safety Advice
Always take care when using an electric drill, particularly in the bathroom. Always check for
hidden cables and pipe work before drilling and take extreme care if there is any water in the
working area.
It is advisable to use a residual current circuit breaker (RCCB).
Always wear suitable eye protection when drilling.
If the product is to be tted on a ceramic tiled wall, a ceramic drill bit should be used. Always
ensure that the drill holes passes through the central tiled area rather than through the grouted
area. To prevent unnecessary damage to the tile, mask the area around the hole with tape before
drilling.
Do not strike the product with hard or sharp objects.
Do not overload the cabinet. Maximum safe working load is 10kg evenly distributed if mounted
on to a solid wall. If mounted on to a cavity wall reduce the load to 5kg evenly distributed.
Note: The wall plugs supplied are for use on solid walls only. For cavity walls or
plasterboard used specialist xings that are available from all good DIY stores.
Product Care
To retain the best quality nish, clean product regularly with a soft cloth and mild detergents.
Do not use abrasive or chemical cleaners as these will damage the product.
Do not position glass components in close contact with a heat source.
Top Tips before you start
1. Please check that all parts are present before you start the assembly of your cabinet.
2. For ease and speed of assembly, we recommend that before you commence each step of the
assembly, you identify all parts required.
3. For larger items, please ensure that you have sufcient space and people (as indicated on
page 1) to assemble your product safely.
4. We recommend that where possible all items are assembled near to the area in which they
will be placed in use.
5. For the protection of your cabinet during assembly (particularly painted nishes) we
recommend that the cabinet is placed on a protected surface to prevent damage.
6. During assembly please take care not to over-tighten any ttings as this may damage the
product.
DESCRIPTION
MONTANA
DOUBLE SWIVEL DOOR WOOD CABINET
CAB 044 R08 PAGE 3 OF 8

DESCRIPTION
MONTANA
DOUBLE SWIVEL DOOR WOOD CABINET
CAB 044 R08 PAGE 4 OF 8
STEP 2
STEP 1
A
x4
B
x2
C
x4
D
G
x4
H
x8

DESCRIPTION
MONTANA
DOUBLE SWIVEL DOOR WOOD CABINET
CAB 044 R08 PAGE 5 OF 8
STEP 3
STEP 4
A
x4
B
x2
C
x4
D

DESCRIPTION
MONTANA
DOUBLE SWIVEL DOOR WOOD CABINET
CAB 044 R08 PAGE 6 OF 8
STEP 6
STEP 5
H
x8
F
x4

DESCRIPTION
MONTANA
DOUBLE SWIVEL DOOR WOOD CABINET
STEP 7
STEP 8
CAB 044 R08 PAGE 7 OF 8
Please remove protective lm from the
double sided sticky tape before tting
the triangle mounting plates. Ensure to
line holes up and t triangle mounting
plate into the corners.
Hanging the Cabinet.
1. Hold the cabinet against the wall in the desired
position. Check that the cabinet is straight using
a spirit level. Open the door and mark through
holes in back with a pencil.
2. Using a 6mm masonry drill, drill the holes in the
marked positions to a depth of 50mm. If drilling
through tiles, please pre-drill using a ceramic drill
bit.
3. Insert the wall plugs to the surface of the wall.
If tting to a tiled surface, the wall plugs should
be inserted below the surface of the tile to avoid
cracking.
4. Hold the cabinet against the wall and insert the
screws through the washers and into the wall
plugs through the holes in the cabinet back, xing
top rst and then the bottom. I
x4
J
x4
E
x4

DESCRIPTION
MONTANA
DOUBLE SWIVEL DOOR WOOD CABINET
CAB 044 R08 PAGE 8 OF 8
For details of the other items in the Croydex range please visit our website:
www.croydex.com
Croydex, Central Way, Andover, Hampshire, SP10 5AW, UK
Tel: [phone] Fax: [phone]
E-mail: [email protected]
1 2 3
Hinge Adjustment
The cabinet hinges can be adjusted as follows:

Check out our full range of Bathroom Furniture
Wide Range of Colours
White Bathroom Furniture / White Gloss Bathroom Furniture
Grey Bathroom Furniture
Black Bathroom Furniture
Walnut Bathroom Furniture
Wide Range of Styles
Bathroom Vanity Units
Bathroom Cabinets
Basin & Toilet Furniture Units
Traditional Bathroom Furniture
Bathroom Drawers
Tall Bathroom Units
Radiator Covers / Radiator Cabinets